Manual.ly Logo

Worx WX712 Manual

0.0 · 0 Ratings

PDF manual · 92 Pages

English

M: OA-GPT-54-NAN
page

/ 92

Loading...
6ea6357a01e59480a8c9e63a4b4151f708c0 page b
Angle Grinder EN
11
WORKING HINTS FOR YOUR
ANGLE GRINDER
1. Always start at no load to achieve maximum
speed then start working.
2. Do not force the disc to work faster, reducing the
Disc’s moving speed means longer working time.
3. Always work with a 15-30 angle between disc and
workpiece. Larger angles will cut ridges into the
workpiece and affect the surface finish. Move the
angle grinder across and back and forth over the
workpiece.
4. When using a cutting disc never change the
cutting angle otherwise you will stall the disc
and angle grinder motor or break the disc. When
cutting, only cut in the opposite direction to the
disc rotation. If you cut in the same direction as
the disc rotation the disc may push itself out of
the cut slot.
5. When cutting very hard material best results can
be achieved with a diamond disc.
6. When using a diamond disc it will become very
hot. If this happens you will see a full ring of
sparks around the rotating disc. Stop cutting and
allow to cool at no load speed for 2-3 minutes.
7. Always ensure the workpiece is firmly held or
clamped to prevent movement.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through
the ventilation slots. This is normal and will not
damage your power tool.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
TROUBLESHOOTING
Although your new angle grinder is really very
simple to operate, if you do experience problems,
please check the following:
1. If your grinder will not operate check the power at
the main plug.
2. If your grinder wheel wobbles or vibrates, check
that outer flange is tight; check that the wheel is
correctly located on the flange plate.
3. If there is any evidence that the wheel is
damaged do not use as the damaged wheel may
disintegrate, remove it and replace with a new
wheel. Dispose of old wheels sensibly.
4. If working on aluminum or a similar soft alloy,
the wheel will soon become clogged and will not
grind effectively.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
PLUG REPLACEMENT
( UK & IRELAND ONLY )
If you need to replace the fitted plug then follow the
instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
BLUE =NEUTRAL
Brown = Live
As the colors of the wires in the mains lead of this
appliance may not correspond with the colored
markings identifying the terminals in your plug,
proceed as follows. The wire which is colored blue
must be connected to the terminal which is marked
with N. The wire which is colored brown must be
connected to the terminal which is marked with L.
WARNING! Never connect live or neutral wires to
the earth terminal of the plug. Only fit an approved
13ABS1363/A plug and the correct rated fuse.
NOTE: If a moulded plug is fitted and has to be
removed take great care in disposing of the plug
and severed cable, it must be destroyed to prevent
engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Cable grip
Brown L (live)
13 Amp fuse approved
to BS1362

Chat with your Worx WX712 manual using AI

Get instant AI answers from your Worx WX712 manual

Ask anything about the Worx WX712. Answers come from this manual, with the pages they are based on.

WX712 Maintenance Schedule

Regularly
Clean ventilation slots

Keep motor ventilation slots clean to prevent dust accumulation which may cause electrical hazards. Use non-metallic objects to remove dust.

Show in the manual (page 11)
Before each use
Inspect accessory for damage

Check abrasive wheels for chips and cracks, backing pad for tears or wear before every operation to ensure safe use.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend WX712?

Yes No

Frequently Asked Questions

A

It is designed for cutting, rough grinding, and brushing metal and stone materials without water. It works best on general workshop and DIY tasks where a compact angle grinder is needed.

Is this answer helpful?

A

No. The tool is not recommended for sanding, polishing, or wire brushing. It is intended mainly for grinding and cutting operations using the proper discs and guard.

Is this answer helpful?

A

The WX712 uses 125 mm discs, which offer a practical balance between control and working capacity for common grinding and cutting jobs.

Is this answer helpful?

A

Yes. It includes a protective guard system and an auxiliary handle, and the design emphasizes safe control during operation. However, safe use still depends on correct accessories and protective equipment.

Is this answer helpful?

A

It is relatively light at about 2.0 kg, and the anti-vibration auxiliary handle helps improve comfort. Even so, vibration and noise mean it is best to take regular breaks and use proper safety gear.

Is this answer helpful?

A

Check that the disc is undamaged, the guard is fitted correctly, the outer flange is tight, and the tool is unplugged before changing accessories. Also make sure the workpiece is secure.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Strong 860W motor for everyday cutting and grinding tasks.
  • Light 2.0 kg body helps reduce strain during longer sessions.
  • Anti-vibration auxiliary handle improves comfort and control.
  • 125 mm disc size offers good versatility for common workshop jobs.
VS

Disadvantages

  • Not intended for sanding, polishing, or wire brushing tasks.
  • Requires careful setup and the correct guard for each operation.
  • Noise and vibration levels mean protective gear is necessary.
  • Best results depend on proper discs, technique, and maintenance.
M: OA-GPT-54-NAN

Product Specification

Type

Angle grinder

Power

860W (230V)

No-load speed

12000/min

Disc diameter

4.92 in

Tool mounting

M14 spindle thread, Spindle lock

Features

Softgrip, Auxiliary handle, Vibration damping

Weight

4.41 lb

Scope of delivery

Grinding disc

M: OA-GPT-54-NAN

Product Description

Worx WX712 Electric Angle Grinder: Compact Power for Everyday Metalwork

The Worx WX712 Electric angle grinder Manual points to a tool built for practical workshop tasks, and the WX712 itself reflects that idea well. Designed for cutting, rough grinding, and brushing metal and stone without water, this angle grinder aims to balance power, control, and portability in one compact package.

With a 860W motor, the WX712 delivers a strong performance for a tool in this class. Its 12,000 RPM no-load speed helps it handle demanding jobs with confidence, while the 125 mm disc capacity gives it enough working area for common cutting and grinding tasks. At around 2.0 kg, it is light enough to handle comfortably during longer sessions, especially when working on edges, welds, or small fabrication jobs.

A useful feature is the anti-vibration auxiliary handle, which improves comfort and helps reduce fatigue during repeated use. The guard system is also designed with safety in mind, making it easier to set up the grinder for either grinding or cutting operations. The machine uses a standard spindle thread and includes essential accessories such as a spanner and grinding disc, so getting started is straightforward.

What stands out most is how clearly the WX712 focuses on controlled performance. This is not a multifunction tool trying to do everything; instead, it is a dedicated grinder for users who want reliable material removal and clean cuts. For DIY projects, home repairs, or light professional use, that focused design can be a real advantage.

Safety remains a major theme throughout the tool's setup and use. The grinder is intended for dry work only, and it should always be used with the proper guard, disc type, and protective gear. Like any angle grinder, it demands respect: correct disc selection, firm two-handed control, and careful work habits are essential for good results.

Notes

  • Best suited for metal and stone trimming, roughing, and brushing.
  • Use only the correct disc type and guard for the job.
  • Anti-vibration support helps during extended use.
  • Always follow safe operating practices and protective equipment guidelines.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly