Manual.ly Logo

Worx WX712 Manual

0.0 · 0 Ratings

PDF manual · 92 Pages

English

M: OA-GPT-54-NAN
page

/ 92

Loading...
6ea6357a01e59480a8c9e63a4b4151f708c0 page 7
Angle Grinder EN
7
VIBRATION INFORMATION
WX710 WX711 WX712
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
Vibration emission value
(for main handle)
a
h
= 4,071m/s
2
a
h
= 5,124m/s
2
Vibration emission value
(for auxiliary handle)
a
h
= 4,557m/s
2
a
h
= 9,136m/s
2
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for comparing one tool with another, and may also be used in a
preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ from the
declared value depending on the ways in which the tool is used dependant on the following examples
and other variations on how the tool is used:
How the tool is used and the materials being cut.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING! To be accurate, an estimation of exposure level in the actual conditions of use should also
take account of all parts of the operating cycle such as the times when the tool is switched off and when
it is running idle but not actually doing the job. This may significantly reduce the exposure level over the total
working period.
Help to minimize your vibration exposure risk.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
0
C or less
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
WX710 WX711 WX712
Spanner 1
Metal grinding disc 1
Auxiliary handle 1 1 /
Anti-vibration auxiliary handle / / 1
We recommend that you purchase your accessories from the same store that sold you the tool. Use good
quality accessories marked with a well-known brand name. Choose the type according to the work you intend
to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer
advice.

Chat with your Worx WX712 manual using AI

Get instant AI answers from your Worx WX712 manual

Ask anything about the Worx WX712. Answers come from this manual, with the pages they are based on.

WX712 Maintenance Schedule

Regularly
Clean ventilation slots

Keep motor ventilation slots clean to prevent dust accumulation which may cause electrical hazards. Use non-metallic objects to remove dust.

Show in the manual (page 11)
Before each use
Inspect accessory for damage

Check abrasive wheels for chips and cracks, backing pad for tears or wear before every operation to ensure safe use.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend WX712?

Yes No

Frequently Asked Questions

A

It is designed for cutting, rough grinding, and brushing metal and stone materials without water. It works best on general workshop and DIY tasks where a compact angle grinder is needed.

Is this answer helpful?

A

No. The tool is not recommended for sanding, polishing, or wire brushing. It is intended mainly for grinding and cutting operations using the proper discs and guard.

Is this answer helpful?

A

The WX712 uses 125 mm discs, which offer a practical balance between control and working capacity for common grinding and cutting jobs.

Is this answer helpful?

A

Yes. It includes a protective guard system and an auxiliary handle, and the design emphasizes safe control during operation. However, safe use still depends on correct accessories and protective equipment.

Is this answer helpful?

A

It is relatively light at about 2.0 kg, and the anti-vibration auxiliary handle helps improve comfort. Even so, vibration and noise mean it is best to take regular breaks and use proper safety gear.

Is this answer helpful?

A

Check that the disc is undamaged, the guard is fitted correctly, the outer flange is tight, and the tool is unplugged before changing accessories. Also make sure the workpiece is secure.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Strong 860W motor for everyday cutting and grinding tasks.
  • Light 2.0 kg body helps reduce strain during longer sessions.
  • Anti-vibration auxiliary handle improves comfort and control.
  • 125 mm disc size offers good versatility for common workshop jobs.
VS

Disadvantages

  • Not intended for sanding, polishing, or wire brushing tasks.
  • Requires careful setup and the correct guard for each operation.
  • Noise and vibration levels mean protective gear is necessary.
  • Best results depend on proper discs, technique, and maintenance.
M: OA-GPT-54-NAN

Product Specification

Type

Angle grinder

Power

860W (230V)

No-load speed

12000/min

Disc diameter

4.92 in

Tool mounting

M14 spindle thread, Spindle lock

Features

Softgrip, Auxiliary handle, Vibration damping

Weight

4.41 lb

Scope of delivery

Grinding disc

M: OA-GPT-54-NAN

Product Description

Worx WX712 Electric Angle Grinder: Compact Power for Everyday Metalwork

The Worx WX712 Electric angle grinder Manual points to a tool built for practical workshop tasks, and the WX712 itself reflects that idea well. Designed for cutting, rough grinding, and brushing metal and stone without water, this angle grinder aims to balance power, control, and portability in one compact package.

With a 860W motor, the WX712 delivers a strong performance for a tool in this class. Its 12,000 RPM no-load speed helps it handle demanding jobs with confidence, while the 125 mm disc capacity gives it enough working area for common cutting and grinding tasks. At around 2.0 kg, it is light enough to handle comfortably during longer sessions, especially when working on edges, welds, or small fabrication jobs.

A useful feature is the anti-vibration auxiliary handle, which improves comfort and helps reduce fatigue during repeated use. The guard system is also designed with safety in mind, making it easier to set up the grinder for either grinding or cutting operations. The machine uses a standard spindle thread and includes essential accessories such as a spanner and grinding disc, so getting started is straightforward.

What stands out most is how clearly the WX712 focuses on controlled performance. This is not a multifunction tool trying to do everything; instead, it is a dedicated grinder for users who want reliable material removal and clean cuts. For DIY projects, home repairs, or light professional use, that focused design can be a real advantage.

Safety remains a major theme throughout the tool's setup and use. The grinder is intended for dry work only, and it should always be used with the proper guard, disc type, and protective gear. Like any angle grinder, it demands respect: correct disc selection, firm two-handed control, and careful work habits are essential for good results.

Notes

  • Best suited for metal and stone trimming, roughing, and brushing.
  • Use only the correct disc type and guard for the job.
  • Anti-vibration support helps during extended use.
  • Always follow safe operating practices and protective equipment guidelines.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly