Manual.ly Logo

Worx WX423 Manual

0.0 · 0 Ratings

PDF manual · 64 Pages

English

M: QW-35-FL
page

/ 64

Loading...
3cbc95edebf1020fb58541726223ec95c817 page f
Electric Circular Saw EN
15
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE:
The tool is intended for ripping and cross-
cutting wood and other materials in straight
cutting lines, while resting firmly on the work
piece.
ASSEMBLY AND OPERATION
Action Figure
Saw blade Assembly and
Removing
See Fig. A
Safety On/Off Switch See Fig. B
Sawdust Removal See Fig. C
Cross and Rip Cutting See Fig. D1, D2
Parallel Guide See Fig. E1, E2
Cutting Depth Adjusting See Fig. F1, F2
Pocket Cutting
See Fig. G1,
G2, G3, G4, G5
WORKING HINTS FOR YOUR
TOOL
If your power tool becomes too hot, please
run your circular saw no load for 2-3 minutes
to cool the motor. Avoid prolonged usage at
very low speeds.
Protect saw blades against impact and shock.
Cutting with extreme force can significantly
reduces the performance capability of the tool
and reduces the service life of the saw blade.
Sawing performance and cutting quality
depend essentially on the condition and the
tooth count of the saw blade. Therefore, use
only sharp saw blades that are suited for the
material being cut.
Choice of blades: 24 teeth for general work,
approx. 40 teeth for finer cuts, more than 40
teeth for very fine cuts into delicate surfaces,
diamond for tile, cement board, etc.
Only use saw blades recommended.
MAINTAIN TOOLS WITH
CARE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Keep tools sharp and clean for better and
safer performance. Follow instructions for
lubricating and changing accessories. Inspect
tool cords periodically and if damaged, have
repaired by authorized service facility. Your
power tool requires no additional lubrication
or maintenance. There are no user serviceable
parts in your power tool. Never use water or
chemical cleaners to clean your power tool.
Wipe clean with a dry cloth. Always store
your power tool in a dry place. Keep the
motor ventilation slots clean. Keep all working
controls free of dust.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.
Periodically clear dust and chips from guard
and base to ensure proper performance.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or retailer for
recycling advice.

Chat with your Worx WX423 manual using AI

Get instant AI answers from your Worx WX423 manual

Ask anything about the Worx WX423. Answers come from this manual, with the pages they are based on.

WX423 Maintenance Schedule

Before each use
Check lower guard function and spring operation

Ensure the lower guard moves freely and closes instantly. Check the spring operation; if sluggish or damaged, service before use.

Show in the manual (page 11)
Before each use
Inspect cutting wheels for damage

Inspect wheels for chips and cracks. If dropped, inspect for damage or install an undamaged wheel.

Show in the manual (page 12)
Regularly
Clean air vents

Regularly clean the power tool's air vents to prevent excessive accumulation of powdered metal which may cause electrical hazards.

Show in the manual (page 12)
Periodically
Inspect supply cord

Inspect tool cords periodically and if damaged, have repaired by authorized service facility.

Show in the manual (page 15)
Periodically
Clear dust from guard and base

Periodically clear dust and chips from guard and base to ensure proper performance.

Show in the manual (page 15)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WX423?

Yes No

Frequently Asked Questions

A

The saw can cut wood up to 27mm, aluminum up to 3mm, PVC pipes with a 13mm radius, tiles up to 8mm, and sheet steel up to 0.91mm depending on the blade used.

Is this answer helpful?

A

Yes, the product description mentions it comes with a case along with accessories like blades and guides for convenient storage and transport.

Is this answer helpful?

A

Use the spindle lock button to hold the shaft steady and the included hex key to loosen the blade bolt. Replace the blade and tighten securely before use.

Is this answer helpful?

A

While specific warranty terms are not listed in the text, WORX products typically come with a manufacturer warranty. Check your local retailer for specific coverage details.

Is this answer helpful?

A

No, never use liquid coolants or water with this electric tool as it poses a risk of electric shock. Keep the tool dry at all times.

Is this answer helpful?

A

You must wear eye protection, hearing protection, and a dust mask. Gloves and a shop apron are also recommended for full body protection.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Compact and lightweight design at 1.4kg for easy handling
  • Versatile cutting capabilities for wood, metal, tile, and PVC
  • Includes multiple blades: TCT, HSS, and Diamond disc
  • Dust extraction outlet helps maintain a clean workspace
  • Soft grip handle reduces user fatigue during operation
VS

Disadvantages

  • Maximum cutting depth limited to 27mm may restrict thick material work
  • Requires separate purchase of additional specialized blades
  • Vibration levels require careful management to avoid hand-arm syndrome
  • Blade changes require a hex key which can be easily misplaced
  • Not suitable for very high volume industrial continuous use
M: QW-35-FL

Product Specification

Type

Mini plunge saw

Power

400W

No-load speed

3600/min

Blade diameter

3.35 inches

Cutting capacity

1.06 inches (cut depth at 0°)

Tool holder

15mm chuck

Features

Soft grip, parallel fence, dust extraction

Weight

3.09 lbs

Package contents

Case, 3-piece accessory set

M: QW-35-FL

Product Description

Worx WX423 Electric Mini Submersible Saw Review

The Worx WX423 Electric Mini Submersible Saw is a compact and powerful tool designed for precision cutting in tight spaces. With a rated power of 400W, this saw delivers efficient performance for various materials including wood, aluminum, PVC pipes, tiles, and thin sheet steel. Its lightweight design at just 1.4kg makes it easy to handle, while the soft grip handle ensures comfort during extended use.

This versatile circular saw features a spindle lock button for quick blade changes and an adjustable depth lever that allows cuts up to 27mm deep. The included parallel guide ensures straight cuts, making it ideal for DIY projects and professional tasks alike. The dust extraction outlet connects to a vacuum adapter for cleaner work environments. Safety is prioritized with a lower blade guard that retracts automatically and a lock-off button to prevent accidental starts.

The package includes essential accessories such as a TCT blade for wood, an HSS blade, a diamond disc for hard materials, a hex key, and a parallel guide. Whether you are cutting timber or trimming metal, the WX423 handles the job with ease. The no-load speed of 3600 RPM provides the necessary torque for smooth operation across different materials.

Users should always wear protective gear including eye protection, hearing protection, and a dust mask when operating this tool. Proper maintenance involves keeping the base plate clean and ensuring the blade is sharp. The tool complies with international safety standards and features double insulation for added user protection.

Important Notes

  • Always ensure the blade is secure before starting.
  • Use only recommended blades for specific materials.
  • Keep ventilation slots clean to prevent overheating.
M: QW-35-FL

© Copyright 2026 Manual.ly