Manual.ly Logo

Worx WX423 Manual

0.0 · 0 Ratings

PDF manual · 64 Pages

English

M: QW-35-FL
page

/ 64

Loading...
3cbc95edebf1020fb58541726223ec95c817 page b
Electric Circular Saw EN
11
friction, blade binding and kickback.
f) Blade depth and bevel adjusting
locking levers must be tight and
secure before making cut. If blade
adjustment shifts while cutting, it may
cause binding and kickback.
g) Use extra caution when sawing into
existing walls or other blind areas. The
protruding blade may cut objects that can
cause kickback.
SAFETY INSTRUCTIONS
FOR SAWS WITH INNER
PENDULUM GUARD
Lower Guard Function
a) Check lower guard for proper closing
before each use. Do not operate the
saw if lower guard does not move
freely and close instantly. Never
clamp or tie the lower guard into the
open position. If saw is accidentally
dropped, lower guard may be bent.Raise
the lower guard with the retracting handle
and make sure it moves freely and does
not touch the blade or any other part, in all
angles and depths of cut.
b) Check the operation of the lower
guard spring. If the guard and the
spring are not operating properly,
they must be serviced before use.
Lower guard may operate sluggishly due
to damaged parts, gummy deposits, or a
build-up of debris.
c) Lower guard may be retracted
manually only for special cuts such
as "plunge cuts" and "compound
cuts." Raise lower guard by retracting
handle and as soon as blade enters
the material, the lower guard must be
released. For all other sawing, the lower
guard should operate automatically.
d) Always observe that the lower guard
is covering the blade before placing
saw down on bench or floor. An
unprotected, coasting blade will cause the
saw to walk backwards, cutting whatever is
in its path. Be aware of the time it takes for
the blade to stop after switch is released.
ADDITIONAL SAFETY
RULES FOR YOUR
CIRCULAR SAW
1. Always wear a dust mask, hearing
protection and eye protection.
2. Only use saw blades recommended in the
specification.
3. Use only blade diameter(s) in accordance
with the markings.
ADDITIONAL SAFETY
RULES FOR YOUR
CUTTING-OFF MACHINES
a) The guard provided with the tool must
be securely attached to the power
tool and positioned for maximum
safety, so the least amount of wheel
is exposed towards the operator.
Position yourself and bystanders away
from the plane of the rotating wheel.
The guard helps to protect operator from
broken wheel fragments and accidental
contact with wheel.
b) Use only bonded reinforced or
diamond cut-off wheels for your
power tool. Just because an accessory
can be attached to your power tool, it does
not assure safe operation.
C) The rated speed of the accessory
must be at least equal to the
maximum speed marked on the power
tool. Accessories running faster than their
rated speed can break and fly apart.
d) Wheels must be used only for
recommended applications. For
example: do not grind with the side
of cut-off wheel. Abrasive cut-off wheels
are intended for peripheral grinding, side
forces applied to these wheels may cause
them to shatter.
e) Always use undamaged wheel flanges
that are of correct diameter for your
selected wheel. Proper wheel flanges
support the wheel thus reducing the
possibility of wheel breakage.
f) Do not use worn down reinforced
wheels from larger power tools.

Chat with your Worx WX423 manual using AI

Get instant AI answers from your Worx WX423 manual

Ask anything about the Worx WX423. Answers come from this manual, with the pages they are based on.

WX423 Maintenance Schedule

Before each use
Check lower guard function and spring operation

Ensure the lower guard moves freely and closes instantly. Check the spring operation; if sluggish or damaged, service before use.

Show in the manual (page 11)
Before each use
Inspect cutting wheels for damage

Inspect wheels for chips and cracks. If dropped, inspect for damage or install an undamaged wheel.

Show in the manual (page 12)
Regularly
Clean air vents

Regularly clean the power tool's air vents to prevent excessive accumulation of powdered metal which may cause electrical hazards.

Show in the manual (page 12)
Periodically
Inspect supply cord

Inspect tool cords periodically and if damaged, have repaired by authorized service facility.

Show in the manual (page 15)
Periodically
Clear dust from guard and base

Periodically clear dust and chips from guard and base to ensure proper performance.

Show in the manual (page 15)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WX423?

Yes No

Frequently Asked Questions

A

The saw can cut wood up to 27mm, aluminum up to 3mm, PVC pipes with a 13mm radius, tiles up to 8mm, and sheet steel up to 0.91mm depending on the blade used.

Is this answer helpful?

A

Yes, the product description mentions it comes with a case along with accessories like blades and guides for convenient storage and transport.

Is this answer helpful?

A

Use the spindle lock button to hold the shaft steady and the included hex key to loosen the blade bolt. Replace the blade and tighten securely before use.

Is this answer helpful?

A

While specific warranty terms are not listed in the text, WORX products typically come with a manufacturer warranty. Check your local retailer for specific coverage details.

Is this answer helpful?

A

No, never use liquid coolants or water with this electric tool as it poses a risk of electric shock. Keep the tool dry at all times.

Is this answer helpful?

A

You must wear eye protection, hearing protection, and a dust mask. Gloves and a shop apron are also recommended for full body protection.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Compact and lightweight design at 1.4kg for easy handling
  • Versatile cutting capabilities for wood, metal, tile, and PVC
  • Includes multiple blades: TCT, HSS, and Diamond disc
  • Dust extraction outlet helps maintain a clean workspace
  • Soft grip handle reduces user fatigue during operation
VS

Disadvantages

  • Maximum cutting depth limited to 27mm may restrict thick material work
  • Requires separate purchase of additional specialized blades
  • Vibration levels require careful management to avoid hand-arm syndrome
  • Blade changes require a hex key which can be easily misplaced
  • Not suitable for very high volume industrial continuous use
M: QW-35-FL

Product Specification

Type

Mini plunge saw

Power

400W

No-load speed

3600/min

Blade diameter

3.35 inches

Cutting capacity

1.06 inches (cut depth at 0°)

Tool holder

15mm chuck

Features

Soft grip, parallel fence, dust extraction

Weight

3.09 lbs

Package contents

Case, 3-piece accessory set

M: QW-35-FL

Product Description

Worx WX423 Electric Mini Submersible Saw Review

The Worx WX423 Electric Mini Submersible Saw is a compact and powerful tool designed for precision cutting in tight spaces. With a rated power of 400W, this saw delivers efficient performance for various materials including wood, aluminum, PVC pipes, tiles, and thin sheet steel. Its lightweight design at just 1.4kg makes it easy to handle, while the soft grip handle ensures comfort during extended use.

This versatile circular saw features a spindle lock button for quick blade changes and an adjustable depth lever that allows cuts up to 27mm deep. The included parallel guide ensures straight cuts, making it ideal for DIY projects and professional tasks alike. The dust extraction outlet connects to a vacuum adapter for cleaner work environments. Safety is prioritized with a lower blade guard that retracts automatically and a lock-off button to prevent accidental starts.

The package includes essential accessories such as a TCT blade for wood, an HSS blade, a diamond disc for hard materials, a hex key, and a parallel guide. Whether you are cutting timber or trimming metal, the WX423 handles the job with ease. The no-load speed of 3600 RPM provides the necessary torque for smooth operation across different materials.

Users should always wear protective gear including eye protection, hearing protection, and a dust mask when operating this tool. Proper maintenance involves keeping the base plate clean and ensuring the blade is sharp. The tool complies with international safety standards and features double insulation for added user protection.

Important Notes

  • Always ensure the blade is secure before starting.
  • Use only recommended blades for specific materials.
  • Keep ventilation slots clean to prevent overheating.
M: QW-35-FL

© Copyright 2026 Manual.ly