Manual.ly Logo

Worx Landroid S400 WR184E Manual

0.0 · 0 Ratings

PDF manual · 344 Pages

English

M: QW-35-FL
page

/ 344

Loading...
db668ed4155ca45a9f946ff03e263f47727a page 5
5
EN
h) Do not let persons who do not know how robotic lawnmower works and behaves use the
mower.
i) Do not put anything on top of robotic lawnmower or its charging station.
j) Do not allow robotic lawnmower to be used with a defective blade disc or body. Neither should it
be used with defective blades, screws, nuts or cables.
k) Always switch off robotic lawnmower when you do not intend to use the mower. Robotic
lawnmower can only start when the power key is switched on and the correct PIN code has been
entered.
l) Keep your hands and feet away from the rotating blades. Never place your hands or feet close to
or under the body when robotic lawnmower is in operation.
m) To avoid using the machine and its peripherals in bad weather conditions especially when there is
a risk of lightning.
n) Not to touch moving hazardous parts before these have come to a complete stop.
o) For machines used in public areas, that warning signs shall be placed around the working area of
the machine. They shall show the substance of the following text:
Warning! Automatic lawnmower! Keep away from the machine! Supervise children!
2. Additionally when the appliance is operating automatically
a) Do not leave the machine to operate unattended if you know that there are pets, children or
people in the vicinity.
Maintenance and storage
WARNING! When the mower is turned upside down the power key must always be
switched off.
The power key should be switched off during all work on the mower’s
underframe, such as cleaning or replacing the blades.
a) Keep all nuts, bolts and screws tight to be sure the appliance is in safe working condition.
b) Inspect the robotic lawnmower each week and replace worn or damaged parts for safety.
c) Check especially that the blades and blade disc are not damaged. Replace all blades and screws
at the same time if necessary so that the rotating parts are balanced.
d) Ensure that only replacement cutting means of the right type are used.
e) Ensure that batteries are charged using the correct charger recommended by the manufacturer.
Incorrect use may result in electric shock, overheating or leakage of corrosive liquid from the
battery.
f) In the event of leakage of electrolyte flush with water/neutralizing agent, seek medical help if it
comes into contact with the eyes etc.
g) Servicing of the appliance should be according to manufacturers’ instructions.
Recommendation
To connect the machine and/or its peripherals only to a supply circuit protected by a residual current
device (RCD) with a tripping current of not more than 30 mA.
Residual risks
To avoid injuries, wear protective gloves when replacing the blades.
Transport
The original packaging should be used when transporting robotic lawnmower over long distances.
To safely move form or within the working area:
a) Press the STOP button to stop the mower.
You select the four digit PIN code when you start the mower for the first time.
b) Always switch off robotic lawnmower if you intend to carry the mower.

Chat with your Worx Landroid S400 WR184E manual using AI

Get instant AI answers from your Worx Landroid S400 WR184E manual

Ask anything about the Worx Landroid S400 WR184E. Answers come from this manual, with the pages they are based on.

Landroid S400 WR184E Maintenance Schedule

Remind me when maintenance is due
Weekly
Inspect the robotic lawnmower

Inspect Landroid each week and replace worn or damaged parts for safety. Check blades and blade disc for damage.

Semiannual
Store over winter

Store in shed or garage during winter. Clean thoroughly, fully charge battery, and turn power off before storage.

Show in the manual (page 15)
Seasonal
Prepare for spring restart

Update time/date settings. Clean oxidation on charging contacts with fine emery cloth if present. Fully charge battery.

Show in the manual (page 16)
Every 2 months
Replace cutting blades

Each cutting blade lasts up to 2 months when programmed to mow every day. Replace all blades and screws in sets.

Show in the manual (page 14)
Regularly
Clean the body and bottom

Clean regularly with a spray bottle and brush. Remove dirt, debris, and grass buildup from daily mowing.

Show in the manual (page 15)
Periodically
Clear charging contacts

Remove build-up of grass clippings or debris around contact pins and charging strips to ensure successful charging.

Show in the manual (page 15)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Landroid S400 WR184E?

Yes No

Frequently Asked Questions

A

The device handles up to 400 square meters effectively for daily maintenance tasks.

Is this answer helpful?

A

Approximately 1.5 hours from empty to full capacity status reported.

Is this answer helpful?

A

No. Water pressure may enter seals and damage internal electronics permanently.

Is this answer helpful?

A

Sensors stop the machine until rain stops and delay period expires completely.

Is this answer helpful?

A

Turn off power and hold by the front handle while facing blades away.

Is this answer helpful?

A

Yes, connects to Wi-Fi for software updates and scheduling controls easily.

Is this answer helpful?

A

Usually indicates boundary wire missing or machine sits outside wire zone.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Large cutting area covers up to 400m2 efficiently without interruption
  • Low noise level protects neighbors from loud machinery during work
  • Fast charging allows full battery reuse quickly within one hour half
  • Intelligent safety sensors prevent accidental injuries involving pets and kids
  • Weather protection halts work during rain automatically to save machine
VS

Disadvantages

  • Requires boundary wire installation around entire perimeter for boundaries
  • Cannot mow wet grass without slipping risks on slippery terrain
  • Heavy wheels may struggle on steep slopes alone without traction aids
  • Battery must be removed for long storage periods to maintain health
  • Obstacles like toys block mowing path constantly causing error states
M: QW-35-FL

Product Specification

Battery

1x Battery (20V, 2.0Ah, Li-Ion)

Cutting Width

7.09 inches

Cutting Height

0.79-1.97 inches, height adjustable, 4 settings

Recommended Lawn Area

up to 4,305.56 sq. ft.

Navigation

Tilt sensor, Lift sensor, Rain sensor, Zones

Boundary System

Boundary wire (328.08 feet)

Special Features

Alarm system, Anti-theft

Smart Home

App control (Wi-Fi)

Max Slope

19° / 35%

Charging System

Automatic

Charging Time

90 min

Noise Level

65 dB(A)

Weight

17.64 lbs

Package Contents

1x Battery, Charging station, Boundary wire (328.08 feet), 130x Boundary hooks, 9x Replacement blades, Height spacers

M: QW-35-FL

Product Description

Welcome to Automated Lawn Care

The Worx WR184E Landroid S400 stands as a premier solution for automated lawn care enthusiasts seeking efficiency and precision in their gardening routine. Designed with advanced robotics technology, this orange robotic mower transforms your yard into a pristine green space without requiring constant human intervention. With a maximum cutting area capacity of 400 square meters, it handles medium to large plots with ease, ensuring a well-groomed lawn at all times. The device operates on a robust 20-volt lithium-ion battery system which provides sufficient power for extended sessions while keeping noise levels remarkably low compared to traditional gas-powered equipment. Measured sound power reaches approximately 64.2 decibels, allowing you to work nearby without disturbance or discomfort for neighbors.

Safety and Security Features

Safety remains a top priority throughout the design process. The unit features intelligent sensors that detect lifts and obstacles to prevent accidents involving pets or children playing nearby. Operators can feel confident knowing that sharp blades are enclosed and only active when the machine is grounded properly. Furthermore, the boundary wire system creates invisible boundaries to define where the machine works effectively without crossing property lines. This specific model requires adherence to strict setup guidelines found in the Worx WR184E Landroid S400 orange Manual regarding wire placement and PIN codes to start operations securely. Following these steps ensures optimal performance and longevity of the cutting components for years of service.

Maintenance and Upgrades

Maintenance is straightforward for most users who follow the recommended schedules listed in documentation. Regular cleaning prevents grass build-up which could hinder wheel movement or cause excessive friction on the deck. Blades should be inspected weekly and replaced as needed to maintain disc balance and cut quality effectively. The battery management system includes protections against overheating and short circuits during charging cycles to ensure safe energy storage. Users are advised to store the unit indoors during winter months to protect sensitive electronic components from extreme cold conditions damaging circuitry. Connectivity options allow for Over-the-Air software updates that enhance functionality over time without physical visits to a service center ever needed.

Handling and Longevity

Transporting the machine requires specific caution protocols to avoid personal injury or damage to parts. It should be carried by the front handle under the mower with blades oriented away from the body to avoid accidental contact. Power must always be switched off before moving the unit manually or storing it long-term for seasons. The included accessories cover essential needs like wire repair connectors and spare blade kits for quick fixes onsite. Rain sensors automatically pause operation during bad weather to protect electronics from water damage entering sealed areas. A dedicated charging station docks the mower automatically returning it to base when energy is low enough for recharge. This feature eliminates the need for manual collection after every session ends successfully. Investment in this tool pays dividends through consistent grass quality and saved time every single week. Proper care according to manufacturer specifications ensures maximum operational life for your garden needs.

M: QW-35-FL

© Copyright 2026 Manual.ly