Manual.ly Logo

Worx Landroid S400 WR184E Manual

0.0 · 0 Ratings

PDF manual · 344 Pages

English

M: QW-35-FL
page

/ 344

Loading...
db668ed4155ca45a9f946ff03e263f47727a page f
15
EN
Attention: When fitting new blades, make sure you replace ALL the blades.
Always use new screws when fitting blades. This is important to ensure blade retention and balance the blade turning disc. Failure
to use new screws could cause serious injury
Important: After screwing the blade to the blade disc, make sure the blade is able to spin freely
5.2 Keep it clean
Your Landroid should be cleaned regularly. This helps keep it in good condition, especially removing dirt, debris and the build-up of
grass from daily mowing. Turn Landroid off before cleaning it. For extra safety, remove the battery.
WARNING!
DO NOT use a hose, high pressure washer or otherwise pour running water on your Landroid.
High pressure water can go inside the sealings and damage electronic and mechanical parts.
5.2.1 .Cleaning the upper body
A. Clean with a spray bottle filled with water. Don’t use solvents or polishers
B. Use a brush or a clean cloth to remove built-up dirt
5.2.2. Cleaning the Bottom
A. Flip Landroid upside down
B. Remove debris and grass clippings using a brush to remove
C. Be careful not to touch the blades with your hands. Wear gloves for protection
D. Clean the blade disc, the chassis and the front wheel(s) thoroughly with a soft brush or moist rag
E. Rotate the blade disc to ensure it rotates freely. Remove any obstructions. Remove any lodged debris so that they don’t cause a
crack in the blade disk. Even the tiniest crack effects mowing performance
F. Check the blades spin freely around the fixing screws. Remove any obstructions
5.2.3. Cleaning the drive wheels
A. Remove mud from wheels with a brush in order to ensure good grip of the tread
5.2.4. Clearing the charging contacts
A. Clean the contact pins located on the charging base and the charging strips located on the Landroid using a cloth
B. Periodically remove any build-up of grass clippings or debris around the contact pins and the charging strips to ensure Landroid
successfully charges each time
5.3. Keep it charged
The heart of Landroid is its 20V Li-Ion Worx Powershare Battery.
A. For the proper storage of the battery, make sure it is fully charged and kept in a cool dry place.
B. The recommended Landroid operation temperature is between 0-55°C
C. The life-span of Landroid’s battery depends on hours of usage and the length of use per day during the mowing season
5.3.1. Landroid can be charged manually without the boundary wire
A. Connect the charging base to a suitable power supply. The green light on the charging base will turn on
B. Manually dock Landroid into the charging base while Landroid is powered off
C. The green light on the charging base will flash and Landroid will begin to charge
5.4. Keep it stored over the winter
Although Landroid is designed and built to survive the most severe weather conditions, we recommend storing it in your shed or
garage during the winter. To prepare it for winter hibernation:
A. Clean it thoroughly

Chat with your Worx Landroid S400 WR184E manual using AI

Get instant AI answers from your Worx Landroid S400 WR184E manual

Ask anything about the Worx Landroid S400 WR184E. Answers come from this manual, with the pages they are based on.

Landroid S400 WR184E Maintenance Schedule

Remind me when maintenance is due
Weekly
Inspect the robotic lawnmower

Inspect Landroid each week and replace worn or damaged parts for safety. Check blades and blade disc for damage.

Semiannual
Store over winter

Store in shed or garage during winter. Clean thoroughly, fully charge battery, and turn power off before storage.

Show in the manual (page 15)
Seasonal
Prepare for spring restart

Update time/date settings. Clean oxidation on charging contacts with fine emery cloth if present. Fully charge battery.

Show in the manual (page 16)
Every 2 months
Replace cutting blades

Each cutting blade lasts up to 2 months when programmed to mow every day. Replace all blades and screws in sets.

Show in the manual (page 14)
Regularly
Clean the body and bottom

Clean regularly with a spray bottle and brush. Remove dirt, debris, and grass buildup from daily mowing.

Show in the manual (page 15)
Periodically
Clear charging contacts

Remove build-up of grass clippings or debris around contact pins and charging strips to ensure successful charging.

Show in the manual (page 15)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Landroid S400 WR184E?

Yes No

Frequently Asked Questions

A

The device handles up to 400 square meters effectively for daily maintenance tasks.

Is this answer helpful?

A

Approximately 1.5 hours from empty to full capacity status reported.

Is this answer helpful?

A

No. Water pressure may enter seals and damage internal electronics permanently.

Is this answer helpful?

A

Sensors stop the machine until rain stops and delay period expires completely.

Is this answer helpful?

A

Turn off power and hold by the front handle while facing blades away.

Is this answer helpful?

A

Yes, connects to Wi-Fi for software updates and scheduling controls easily.

Is this answer helpful?

A

Usually indicates boundary wire missing or machine sits outside wire zone.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Large cutting area covers up to 400m2 efficiently without interruption
  • Low noise level protects neighbors from loud machinery during work
  • Fast charging allows full battery reuse quickly within one hour half
  • Intelligent safety sensors prevent accidental injuries involving pets and kids
  • Weather protection halts work during rain automatically to save machine
VS

Disadvantages

  • Requires boundary wire installation around entire perimeter for boundaries
  • Cannot mow wet grass without slipping risks on slippery terrain
  • Heavy wheels may struggle on steep slopes alone without traction aids
  • Battery must be removed for long storage periods to maintain health
  • Obstacles like toys block mowing path constantly causing error states
M: QW-35-FL

Product Specification

Battery

1x Battery (20V, 2.0Ah, Li-Ion)

Cutting Width

7.09 inches

Cutting Height

0.79-1.97 inches, height adjustable, 4 settings

Recommended Lawn Area

up to 4,305.56 sq. ft.

Navigation

Tilt sensor, Lift sensor, Rain sensor, Zones

Boundary System

Boundary wire (328.08 feet)

Special Features

Alarm system, Anti-theft

Smart Home

App control (Wi-Fi)

Max Slope

19° / 35%

Charging System

Automatic

Charging Time

90 min

Noise Level

65 dB(A)

Weight

17.64 lbs

Package Contents

1x Battery, Charging station, Boundary wire (328.08 feet), 130x Boundary hooks, 9x Replacement blades, Height spacers

M: QW-35-FL

Product Description

Welcome to Automated Lawn Care

The Worx WR184E Landroid S400 stands as a premier solution for automated lawn care enthusiasts seeking efficiency and precision in their gardening routine. Designed with advanced robotics technology, this orange robotic mower transforms your yard into a pristine green space without requiring constant human intervention. With a maximum cutting area capacity of 400 square meters, it handles medium to large plots with ease, ensuring a well-groomed lawn at all times. The device operates on a robust 20-volt lithium-ion battery system which provides sufficient power for extended sessions while keeping noise levels remarkably low compared to traditional gas-powered equipment. Measured sound power reaches approximately 64.2 decibels, allowing you to work nearby without disturbance or discomfort for neighbors.

Safety and Security Features

Safety remains a top priority throughout the design process. The unit features intelligent sensors that detect lifts and obstacles to prevent accidents involving pets or children playing nearby. Operators can feel confident knowing that sharp blades are enclosed and only active when the machine is grounded properly. Furthermore, the boundary wire system creates invisible boundaries to define where the machine works effectively without crossing property lines. This specific model requires adherence to strict setup guidelines found in the Worx WR184E Landroid S400 orange Manual regarding wire placement and PIN codes to start operations securely. Following these steps ensures optimal performance and longevity of the cutting components for years of service.

Maintenance and Upgrades

Maintenance is straightforward for most users who follow the recommended schedules listed in documentation. Regular cleaning prevents grass build-up which could hinder wheel movement or cause excessive friction on the deck. Blades should be inspected weekly and replaced as needed to maintain disc balance and cut quality effectively. The battery management system includes protections against overheating and short circuits during charging cycles to ensure safe energy storage. Users are advised to store the unit indoors during winter months to protect sensitive electronic components from extreme cold conditions damaging circuitry. Connectivity options allow for Over-the-Air software updates that enhance functionality over time without physical visits to a service center ever needed.

Handling and Longevity

Transporting the machine requires specific caution protocols to avoid personal injury or damage to parts. It should be carried by the front handle under the mower with blades oriented away from the body to avoid accidental contact. Power must always be switched off before moving the unit manually or storing it long-term for seasons. The included accessories cover essential needs like wire repair connectors and spare blade kits for quick fixes onsite. Rain sensors automatically pause operation during bad weather to protect electronics from water damage entering sealed areas. A dedicated charging station docks the mower automatically returning it to base when energy is low enough for recharge. This feature eliminates the need for manual collection after every session ends successfully. Investment in this tool pays dividends through consistent grass quality and saved time every single week. Proper care according to manufacturer specifications ensures maximum operational life for your garden needs.

M: QW-35-FL

© Copyright 2026 Manual.ly