Manual.ly Logo

PowerWalker VFI 2000 AT FR Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: QW-35-FL
page

/ 12

Loading...
b1adf799fc9b6cbb1b2426629956191d4ae1 page 1
1
ENGLISH
General Manual
PowerWalker Uninterruptible Power Supply
This manual contains important safety precautions, general UPS instructions and useful hints that should be
followed during installation, operation and maintenance of the UPS and batteries. Before using the product,
please also read the second manual that covers series-specific information.
I. Safety & Emergency
1. This is a product for commercial and industrial application (Class A). Installation restrictions or
additional measures may be needed to prevent potential disturbances.
2. Do not allow liquids or any foreign object to enter the UPS. No containers with liquids shall be placed
on the UPS or in close vicinity.
3. The utility power outlet shall be near the equipment and easily accessible. In the event of an emergency,
press OFF button and disconnect the power cord from the AC power supply.
4. In the event of fire in the vicinity, please use dry powder fire extinguishers.
5. Even after the unit is disconnected from the input socket, internal components are still connected to
the battery which is potentially dangerous. If any internal inspection or replacement of the battery is
required, please contact a qualified technician.
6. Please recycle all possible components. The batteries are not to be disposed in your domestic waste
container.
7. Installation and usage must be performed in accordance with the local electric regulations and safety
requirements. Please check if protected equipment or environment has any special requirements.
II. Information
1. Uninterruptible Power Supplies are designed to protect sensitive electronic equipment from power
outages and interference. It is equipped with many features that allow any attached equipment to
operate longer and with higher reliability.
2. The product is pluggable to the wall socket and if your version is delivered with batteries already
installed, it can be operated by laymen.
3. Icon Φ on the rating label stands for phase symbol.
4. This product complies with the safety and environmental regulations in EU.
III. Preparation
1. This unit is intended for installation in a controlled environment. Operating under following conditions
is prohibited:
• Combustible gas, corrosive substance or heavy dust.
• Extraordinarily high or low temperature.
• Standing or running water or extreme humidity.
• Exposed to direct sunshine or near any heating apparatus.
• Serious vibrations.

Chat with your PowerWalker VFI 2000 AT FR manual using AI

Get instant AI answers from your PowerWalker VFI 2000 AT FR manual

Ask anything about the PowerWalker VFI 2000 AT FR. Answers come from this manual, with the pages they are based on.

VFI 2000 AT FR Maintenance Schedule

Remind me when maintenance is due
Monthly
Monitor battery condition after two years of use

After two years, strictly monitor battery state monthly. If discharge time is less than 50% of rated value, replace batteries.

Every 2 Months
Recharge battery during high-temp storage

For locations with high temperature, repeat the charging cycle every two months.

Quarterly
Recharge battery during long-term storage

For moderate climates, recharge battery every three months by plugging in for several hours.

As needed / Dusty environments
Clean the USV exterior and vents

Keep area clean. If dusty, vacuum exterior. Unplug before cleaning. Use dry soft cloth for front panel and air intakes.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend VFI 2000 AT FR?

Yes No

Frequently Asked Questions

A

The design life is three to five years from the date of production. You should monitor battery condition frequently after two years to ensure reliability.

Is this answer helpful?

A

No, the USB port and RS-232 port cannot work at the same time. You must choose one for communication.

Is this answer helpful?

A

ECO mode bypasses input to output for energy saving when input voltage is within the set range. It offers higher efficiency in line mode.

Is this answer helpful?

A

Unplug the UPS prior to cleaning. Use dry soft clothes for the front panel and plastic parts. Do not use liquid or spray detergent.

Is this answer helpful?

A

Yes, the DC Start Function enables the UPS to be started up when AC utility power is not available and the battery is charged.

Is this answer helpful?

A

Warning occurs at 105-110% overload. Shutdown happens after one minute at 110-130% and after 3 seconds above 130%.

Is this answer helpful?

A

Yes, selected models include RJ11/RJ45 surge protection for connecting modems or phone lines to protect equipment from communication surges.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Dual communication ports allow flexible monitoring via USB or serial connections for system integration.
  • Automatic Voltage Regulation boosts low or bucks high voltage to protect connected devices from fluctuations.
  • Pure sine wave output ensures compatibility with sensitive equipment like servers and medical devices.
  • ECO mode increases efficiency when input voltage is within normal ranges without compromising power stability.
  • Clear LCD display provides immediate insight into input voltage, output frequency, and remaining battery capacity.
VS

Disadvantages

  • USB and serial ports cannot function simultaneously which may limit specific monitoring setups requiring both.
  • Batteries have a design life of three to five years meaning frequent monitoring is needed after two years.
  • Overload protection shuts down units quickly if limits are exceeded which may interrupt critical processes.
  • Some internal settings like battery pack count require manual configuration during initial setup phases.
  • EPO wiring requires building safety integration knowledge and proper termination to function correctly.
M: QW-35-FL

Product Specification

Type

Tower

Classification

VFI (On-Line)

Apparent Power

2000VA

Real Power

1800W

Voltage

208V, 220V, 230V, 240V

Input

C14

Outputs

4x Type E

Interfaces

USB, serial

Charging Time

4h (90%)

Weight

37.70 lbs

Dimensions (WxHxD)

5.94x8.86x15.35in

Features

LCD, HID Support

M: QW-35-FL

Product Description

BlueWalker PowerWalker VFI 2000 AT FR Overview

Keeping your critical equipment safe from sudden power failures is essential for uninterrupted business continuity in modern offices. The BlueWalker PowerWalker VFI 2000 AT FR offers robust protection for sensitive electronics in industrial and commercial settings. This Uninterruptible Power Supply ensures stability during sudden outages or damaging voltage spikes from the grid. It protects servers and networking gear effectively from damage.

Advanced Connectivity Features

Users benefit from flexible communication options including USB and serial ports on the rear panel. These features allow remote monitoring and control via appropriate software or generic system drivers. You can set the operating system to sleep or shut down automatically when battery levels drop low. Real-time data on load percentage, voltage, and frequency is clearly visible on the integrated LCD panel. This visibility helps maintain system health proactively.

Safety and Installation Guidelines

Always install the unit near an easily accessible power outlet for emergency access during incidents. Ensure the ground connection is secure to avoid electrical shock hazards during regular operation. Do not allow liquids or foreign objects near the device enclosure to prevent malfunctions. Follow local electrical regulations strictly during installation processes. The unit generates heat during use so keep cooling vents clear of dust accumulation. Avoid combustible gases or high humidity environments completely.

Operation Tips for Reliability

Leave the unit plugged in continuously to recharge the battery system effectively for future use. Recharging takes at least six hours for first time full capacity under normal conditions. Keep ambient temperature around 25 degrees Celsius for maximum battery longevity over years. Plan your connected load below 80% of rated capacity for safety margins during peaks. Avoid exceeding 30% load for optimal system energy performance and efficiency.

Maintenance Notes

Clean the exterior casing with a dry cloth on a regular basis to remove dust. Replace batteries only by qualified technicians who fully understand safety precautions and requirements. Batteries typically last between three to five years based on original production date. Monitor capacity monthly once the unit passes two years of service in the field. Dispose of used batteries according to strict local recycling laws and environmental guidelines.

Troubleshooting Support

Check LCD displays for error codes if significant issues arise unexpectedly. E11 or E12 often indicate battery connection problems or faults within the pack. E14 suggests load issues such as shorts or excessive current draw from devices. Smoke requires immediate power cut and contacting qualified service personnel promptly. Consult online resources for specific fault codes and resolution steps. Ensure ventilation is never blocked during operation.

M: QW-35-FL

© Copyright 2026 Manual.ly