Manual.ly Logo

NAD CI 940 Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: OA-GPT-54-NAN
page

/ 12

Loading...
b3706b18b0d75a4d2c342c7e0ca2bff6fbb9 page 3
19 Damage Requiring Service - Unplug this product from the wall outlet
and refer servicing to qualied service personnel under the following
conditions:
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a
qualied technician to restore the product to its normal operation.
e) If the product has been dropped or damaged in any way.
f) when the product exhibits a distinct change in performance-this
indicates a need for service.
20 Replacement Parts - When replacement parts are required, be
sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
21 Safety Check - Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
22 Wall or Ceiling Mounting - The product should be mounted to a wall
or ceiling only as recommended by the manufacturer.
23 Heat - The product should be situated away from heat sources such as
radiators, heat registers, stoves or other products (including ampliers)
that produce heat.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN
AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE”
WITHIN THE PRODUCT’S ENCLOSURE THAT MAYBE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO
PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS
INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN
THE LITERATURE ACCOMPANYING THE APPLIANCE.
The equipment draws its nominal non-operational power from the AC outlet
with its POWER switch at the ON position.
The socket-outlet shall be installed near the apparatus and shall be easily
accessible.
CAUTION
Changes or modications to this equipment not expressly approved by NAD
Electronics for compliance could void the user’s authority to operate this
equipment.
CAUTION REGARDING PLACEMENT
To maintain proper ventilation, be sure to leave a space around the unit (from
the largest outer dimensions including projections) that is equal to or greater
than shown below.
Left and Right Panels: 10 cm
Rear Panel: 10 cm
Top Panel: 10 cm
IMPORTANT SAFETY INSTRUCTIONS
3
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Chat with your NAD CI 940 manual using AI

Get instant AI answers from your NAD CI 940 manual

Ask anything about the NAD CI 940. Answers come from this manual, with the pages they are based on.

CI 940 Maintenance Schedule

Before cleaning
Unplug power cord before cleaning

Disconnect the AC plug from the outlet before cleaning. Do not use liquid cleaners or sprays; only wipe with a damp cloth.

When storing for long periods
Disconnect power cord during extended storage

If the unit is not used for several months, unplug the power cord from the outlet.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend CI 940?

Yes No

Frequently Asked Questions

A

It is a multi-channel amplifier intended for custom audio systems, especially installations that need two zones of speaker output with flexible control and reliable day-to-day operation.

Is this answer helpful?

A

Yes. Each zone can be set to bridge mode, turning it into a mono output with higher power. This is useful when a single stronger channel is needed for a speaker or zone.

Is this answer helpful?

A

Yes. It can power on through a +12V trigger or by sensing an active audio signal, depending on how the rear-panel switch is configured.

Is this answer helpful?

A

It provides more than 35 W per channel into 8 or 4 ohms in stereo, and more than 70 W into 8 ohms in bridge mode, according to the listed specifications.

Is this answer helpful?

A

Make sure the AC power is connected, the power switch is on, the unit is out of standby, and an active input signal is reaching the zone input terminals. Also check speaker wiring.

Is this answer helpful?

A

The amplifier needs open airflow to avoid overheating and to operate reliably. The manual advises leaving space around the unit and avoiding enclosed or soft-surface placement.

Is this answer helpful?

A

Yes, as long as basic safety rules are followed. Keep it dry, use the correct fuse, avoid blocking vents, and disconnect power before changing connections or performing maintenance.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Two-zone design supports flexible stereo or bridged speaker setups for different installation needs.
  • +12V trigger and input-sense modes make it easy to integrate with control systems and AV components.
  • Compact chassis and clear rear-panel layout suit structured custom audio installations.
  • Low standby power and auto-standby behavior help reduce unnecessary energy use.
VS

Disadvantages

  • Output power is modest compared with larger amplifiers, so it may not suit very demanding rooms.
  • Bridge mode requires care and is not recommended with low-impedance speakers.
  • Setup depends on correct wiring, ventilation, and mode selection, which may be complex for beginners.
  • No user-serviceable parts inside, so repairs require qualified service support.
M: OA-GPT-54-NAN

Product Specification

Channels

4

Power per Channel

35W (8Ω), 60W (4Ω)

Audio Connections

2x Stereo Line In (RCA), 2x Pre Out (RCA)

Power Consumption

55W muted, 0.5W Standby

Color

black

Dimensions

19.02x4.13x12.72in (WxHxD)

Weight

15.34lb

M: OA-GPT-54-NAN

Product Description

NAD CI 940: Compact Multi-Zone Power with Practical Control

The NAD CI 940 is a multi-channel amplifier designed for custom audio installations where reliability, flexibility, and clean control matter. It is built to serve two separate zones, giving users a straightforward way to power distributed speakers in a home audio setup, media room, or small commercial environment. The NAD CI 940 Manual highlights that this amplifier is not just about output; it is also about safe operation, simple integration, and dependable everyday use.

One of the most useful features is the ability to configure each zone in either stereo or bridge mode. In stereo, the amplifier can drive two channels normally, while bridge mode allows a zone to act as a mono output with higher power. That makes the CI 940 adaptable to different speaker layouts and listening goals. For installers and enthusiasts, this flexibility can simplify system design without adding unnecessary complexity.

The unit also supports practical startup options, including front-panel standby control, +12V trigger input, and input-sensing auto turn-on. This means the amplifier can work smoothly with a preamplifier or AV processor and power on only when needed. The manual also explains that if no signal is present, the system can return to standby after a delay, helping reduce wasted energy.

Another strong point is the focus on safe installation. NAD includes clear guidance on ventilation, grounding, cable routing, and protection from moisture, overload, and heat. These notes matter because an amplifier installed in a confined rack or used with poor wiring can suffer performance loss or damage. The CI 940 is rated for modest but useful continuous power, with dynamic capability that supports a wide range of everyday audio applications.

For users who value long-term ownership, the CI 940 also offers straightforward maintenance rules. Keep it ventilated, use the correct fuse, avoid blocking airflow, and disconnect power before making connections. In short, this amplifier is a thoughtful solution for people who want multi-zone sound with dependable control and a clear operating philosophy.

Notes

  • Best suited for custom installs and multi-room audio.
  • Bridge mode increases power, but low-impedance speakers are not recommended.
  • Proper ventilation and wiring are essential for stable performance.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly