Manual.ly Logo

NAD CI 940 Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: OA-GPT-54-NAN
page

/ 12

Loading...
b3706b18b0d75a4d2c342c7e0ca2bff6fbb9 page 2
SAVE THESE INSTRUCTIONS FOR LATER USE.
FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE
AUDIO EQUIPMENT.
1 Read instructions - All the safety and operating instructions should be
read before the product is operated.
2 Retain instructions - The safety and operating instructions should be
retained for future reference.
3 Heed Warnings - All warnings on the product and in the operating
instructions should be adhered to.
4 Follow Instructions - All operating and use instructions should be
followed.
5 Cleaning - Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
6 Attachments - Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
7 Water and Moisture - Do not use this product near water-for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet
basement; or near a swimming pool; and the like.
8 Accessories - Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing serious injury to
a child or adult, and serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufacturer,
or sold with the product. Any mounting of the product should follow
the manufacturer’s instructions, and should use a mounting accessory
recommended by the manufacturer.
9 A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause
the product and cart combination to overturn.
10 Ventilation - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to
protect it from overheating, and these openings must not be blocked
or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product should
not be placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s instructions have
been adhered to.
11 Power Sources - This product should be operated only from the type
of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your product dealer or
local power company.
The primary method of isolating the amplier from the mains supply
is to disconnect the mains plug. Ensure that the mains plug remains
accessible at all times. Unplug the AC power cord from the AC outlet if
the unit will not be used for several months or more.
12 Grounding or Polarization - This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider
than the other). This plug will t into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to t, contact
your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
13 Power - Cord Protection - Power-supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
14 Outdoor Antenna Grounding - If an outside antenna or cable system
is connected to the product, be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges
and built-up static charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to proper grounding
of the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors, location
of antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer’s attention to Section
820-40 of the NEC which provides guidelines for proper grounding and, in
particular, species that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
15 Lightning - For added protection for this product during a lightning
storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the product due to lightning
and power-line surges.
16 Power Lines - An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be
fatal.
17 Overloading - Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of re or
electric shock.
18 Object and Liquid Entry - Never push objects of any kind into this
product through openings as they may touch dangerous voltage points
or short-out parts that could result in a re or electric shock. Never spill
liquid of any kind on the product.
WARNING: THE APPARATUS SHOULD NOT BE EXPOSED TO
DRIPPING OR SPLASHING, AND OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHOULD NOT BE PLACED ON THE APPARATUS.
AS WITH ANY ELECTRONIC PRODUCTS, USE CARE NOT TO SPILL
LIQUIDS INTO ANY PART OF THE SYSTEM. LIQUIDS CAN CAUSE A
FAILURE AND/OR A FIRE HAZARD.
IMPORTANT SAFETY INSTRUCTIONS
2
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Chat with your NAD CI 940 manual using AI

Get instant AI answers from your NAD CI 940 manual

Ask anything about the NAD CI 940. Answers come from this manual, with the pages they are based on.

CI 940 Maintenance Schedule

Before cleaning
Unplug power cord before cleaning

Disconnect the AC plug from the outlet before cleaning. Do not use liquid cleaners or sprays; only wipe with a damp cloth.

When storing for long periods
Disconnect power cord during extended storage

If the unit is not used for several months, unplug the power cord from the outlet.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend CI 940?

Yes No

Frequently Asked Questions

A

It is a multi-channel amplifier intended for custom audio systems, especially installations that need two zones of speaker output with flexible control and reliable day-to-day operation.

Is this answer helpful?

A

Yes. Each zone can be set to bridge mode, turning it into a mono output with higher power. This is useful when a single stronger channel is needed for a speaker or zone.

Is this answer helpful?

A

Yes. It can power on through a +12V trigger or by sensing an active audio signal, depending on how the rear-panel switch is configured.

Is this answer helpful?

A

It provides more than 35 W per channel into 8 or 4 ohms in stereo, and more than 70 W into 8 ohms in bridge mode, according to the listed specifications.

Is this answer helpful?

A

Make sure the AC power is connected, the power switch is on, the unit is out of standby, and an active input signal is reaching the zone input terminals. Also check speaker wiring.

Is this answer helpful?

A

The amplifier needs open airflow to avoid overheating and to operate reliably. The manual advises leaving space around the unit and avoiding enclosed or soft-surface placement.

Is this answer helpful?

A

Yes, as long as basic safety rules are followed. Keep it dry, use the correct fuse, avoid blocking vents, and disconnect power before changing connections or performing maintenance.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Two-zone design supports flexible stereo or bridged speaker setups for different installation needs.
  • +12V trigger and input-sense modes make it easy to integrate with control systems and AV components.
  • Compact chassis and clear rear-panel layout suit structured custom audio installations.
  • Low standby power and auto-standby behavior help reduce unnecessary energy use.
VS

Disadvantages

  • Output power is modest compared with larger amplifiers, so it may not suit very demanding rooms.
  • Bridge mode requires care and is not recommended with low-impedance speakers.
  • Setup depends on correct wiring, ventilation, and mode selection, which may be complex for beginners.
  • No user-serviceable parts inside, so repairs require qualified service support.
M: OA-GPT-54-NAN

Product Specification

Channels

4

Power per Channel

35W (8Ω), 60W (4Ω)

Audio Connections

2x Stereo Line In (RCA), 2x Pre Out (RCA)

Power Consumption

55W muted, 0.5W Standby

Color

black

Dimensions

19.02x4.13x12.72in (WxHxD)

Weight

15.34lb

M: OA-GPT-54-NAN

Product Description

NAD CI 940: Compact Multi-Zone Power with Practical Control

The NAD CI 940 is a multi-channel amplifier designed for custom audio installations where reliability, flexibility, and clean control matter. It is built to serve two separate zones, giving users a straightforward way to power distributed speakers in a home audio setup, media room, or small commercial environment. The NAD CI 940 Manual highlights that this amplifier is not just about output; it is also about safe operation, simple integration, and dependable everyday use.

One of the most useful features is the ability to configure each zone in either stereo or bridge mode. In stereo, the amplifier can drive two channels normally, while bridge mode allows a zone to act as a mono output with higher power. That makes the CI 940 adaptable to different speaker layouts and listening goals. For installers and enthusiasts, this flexibility can simplify system design without adding unnecessary complexity.

The unit also supports practical startup options, including front-panel standby control, +12V trigger input, and input-sensing auto turn-on. This means the amplifier can work smoothly with a preamplifier or AV processor and power on only when needed. The manual also explains that if no signal is present, the system can return to standby after a delay, helping reduce wasted energy.

Another strong point is the focus on safe installation. NAD includes clear guidance on ventilation, grounding, cable routing, and protection from moisture, overload, and heat. These notes matter because an amplifier installed in a confined rack or used with poor wiring can suffer performance loss or damage. The CI 940 is rated for modest but useful continuous power, with dynamic capability that supports a wide range of everyday audio applications.

For users who value long-term ownership, the CI 940 also offers straightforward maintenance rules. Keep it ventilated, use the correct fuse, avoid blocking airflow, and disconnect power before making connections. In short, this amplifier is a thoughtful solution for people who want multi-zone sound with dependable control and a clear operating philosophy.

Notes

  • Best suited for custom installs and multi-room audio.
  • Bridge mode increases power, but low-impedance speakers are not recommended.
  • Proper ventilation and wiring are essential for stable performance.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly