Manual.ly Logo

Benning VT 2 Manual

5.0 · 1 Ratings

PDF manual · 49 Pages

English

M: QW-35-FL
page

/ 49

Loading...
1813d1608400ea1f0da3f26b97eb132acc18 page c
09/ 2020
BENNING VT 2
12
Electrical symbols on the device:
Symbol Meaning
Attention! Magnets might a󰀨ect the correct functioning of cardiac pacemakers and im-
planted debrillators. As a user of such medical devices, keep a su󰀩cient distance to
the magnet.
m
Attention! Please observe documentation!
This symbol indicates that the information provided in the operating manual must be
complied with in order to avoid risks.
This symbol on the BENNING VT 2 indicates that the indicator is equipped with protec-
tive insulation (protection class II).
Please observe the operating manual!
This symbol on the BENNING VT 2 means that the BENNING VT 2 complies with the
EU directives.
AC voltage
Earth (voltage to earth)
This symbol shows the orientation of the batteries for inserting them with correct polarity.
2. Device description (gure A)
1
ProbetipwithLEDindication (red/green)
2
Grip limit
3
H
LED (red), indication for high sensitivity (detection of electric fields of voltages from approx.
12 V AC)
4
Push-button (blue), for enabling high sensitivity (detection of electric fields of voltages from ap-
prox. 12 V AC)
5
Clip
6
Batterycompartmentcover
7
Test magnet
3. Functionaltest
- Check the phase indicator and magnetic field tester for correct functioning immediately before and
after using it!
- Test the phase test for correct functioning with a familiar voltage source, e.g. a 230 V socket.
- Check the correct functioning of the magnetic field test with the integrated test magnet
7
. The test
magnet can be unscrewed from the battery compartment cover
6
.
- Please replace the batteries as soon as the red LED indication
1
or the acoustic signal are getting
weaker.
- Do not use the BENNING VT 2, if not all functions are working properly!
- The BENNING VT 2 has no circuit breaker and is always enabled. A special circuit with low current
consumption extends the battery lifetime and thus ensures that the device is ready for use.

Chat with your Benning VT 2 manual using AI

Get instant AI answers from your Benning VT 2 manual

Ask anything about the Benning VT 2. Answers come from this manual, with the pages they are based on.

VT 2 Maintenance Schedule

Before and after each use
Check device functionality

Verify the phase indicator and magnetic field tester work correctly immediately before and after every use. Do not use if functions fail.

Show in the manual (page 12)
When weak signal occurs
Replace batteries

Replace the two LR03/AAA batteries as soon as the red LED indication or acoustic signal becomes weaker.

Show in the manual (page 12)
As needed
Clean housing and battery compartment

Clean the exterior of the device with a clean dry cloth. Also clean the battery area if contamination or deposits are present.

Show in the manual (page 14)
Before long-term storage
Remove batteries for storage

If the device is stored for a longer period of time, remove the batteries from the device to prevent damage.

Show in the manual (page 14)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend VT 2?

Yes No
0
User Pic

Yvonne Mason

5 months ago

Is this product small enough to be portable and does it fully meet its intended purpose?

0
User Pic

Manual.ly

5 months ago

Yes, the product is designed to be compact and practical for easy portability. Based on user feedback, it fully satisfies its primary function and meets customer expectations effectively.

M: QW-35-FL
M: QW-35-FL

Frequently Asked Questions

A

No, the BENNING VT 2 is designed to detect alternating current (AC) fields only. It cannot detect direct current (DC) voltage fields.

Is this answer helpful?

A

Users with pacemakers or implanted defibrillators should keep a sufficient distance from the device because its internal magnets can affect the functioning of these medical implants.

Is this answer helpful?

A

You should test the device immediately before and after use. Check the phase function on a known voltage source like a 230 V socket and test the magnetic field function using the integrated test magnet.

Is this answer helpful?

A

The device requires two Micro batteries, specifically type LR03 or AAA (1.5 V), inserted with the correct polarity.

Is this answer helpful?

A

No. The BENNING VT 2 is not a substitute for a two-pole voltage tester. You must use a certified two-pole tester to definitively confirm the absence of voltage.

Is this answer helpful?

A

If the probe tip lights up red and green at the same time, it indicates that both an electrical field from a live part and a magnetic field are being detected simultaneously.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Detects AC voltages from 12 V to 1000 V without physical contact
  • Identifies both electrical and magnetic fields with clear LED and audio feedback
  • Includes a built-in test magnet for immediate functional verification
  • High sensitivity mode allows detection of low voltages around 12 V AC
  • Durable design with IP53 protection against dust and water spray
VS

Disadvantages

  • Incapable of detecting DC voltage fields
  • Not suitable for confirming zero voltage status compared to two-pole testers
  • Magnets inside may interfere with implanted medical devices like pacemakers
  • Requires regular battery replacement to maintain optimal performance
  • Effectiveness can be reduced by thick insulation or heavy shielding on conductors
M: QW-35-FL

Product Specification

Measurement range

12-1000V

M: QW-35-FL

Product Description

Benning VT 2 Non-contact Phase Tester – Read, Download & Print Free

The BENNING VT 2 is a versatile non-contact phase indicator and magnetic field tester designed for professional electricians. This device allows users to detect electrical fields generated by AC voltages ranging from approximately 12 volts up to 1000 volts without the need for direct physical contact with live parts. It also features the capability to identify strong magnetic fields produced by electromagnetic switches, relays, and solenoid valves.

Designed with safety as a priority, the BENNING VT 2 operates within specific overvoltage categories (CAT III 1000 V and CAT IV 600 V) and includes a built-in test magnet for verifying functionality before use. The device utilizes a clear LED system where a red light indicates the presence of an electrical field, while a green light signals a detected magnetic field. An acoustic signal accompanies these visual cues, increasing in frequency as the voltage or field strength rises. A special high-sensitivity mode can be activated by holding a blue button, enabling the detection of lower voltages starting around 12 volts AC.

This tool is essential for locating phases in external conductors, identifying interruptions in live cables such as broken wires in cable reels, and checking for magnetic fields in industrial equipment. It does not require current flow during testing, making it a safe option for preliminary checks. However, it is crucial to remember that this device is not a substitute for a two-pole voltage tester when determining the absolute absence of voltage. Users must always follow strict safety protocols, including keeping a safe distance from pacemakers due to the internal magnets, and ensuring the battery compartment is closed during operation.

Important Notes

  • Always perform a functional check before and after every use.
  • Do not touch the white probe tip during testing; hold only the red handle behind the grip limit.
  • Remove batteries if the device will be stored for extended periods to prevent leakage.
  • Ensure the device is used only by qualified personnel in accordance with safe working procedures.
M: QW-35-FL

© Copyright 2026 Manual.ly