Manual.ly Logo

Benning VT 1 Manual

5.0 · 1 Ratings

PDF manual · 39 Pages

English

M: QW-35-FL
page

/ 39

Loading...
b2bd134465851f0824cfe2518403304ed976 page b
08/ 2020
BENNING VT 1
11
6. Testingofinterruptionsoflivelines(figure C)
To localize interruptions of live lines (e.g. a cable break in a cable reel or defective lamps in a chain of
lights), pass the probe tip
1
along the insulated line from the feeding point (phase) in direction of the
other end of the line. The point of interruption is located as soon as the phase (external conductor) is
no longer indicated by the acoustic signal and the test probe lighting up.
For testing a cable reel, make sure to turn the shock-proof plug by 180° in order to connect both lines
to the phase (external conductor) of a shock-proof socket.
7. Batteryreplacement (figure A)
- Do not apply voltage to the device when the battery compartment is open!
- Remove the battery compartment cover
4
from the indicator and remove the used batteries.
- Insert new micro batteries (LR03/AAA) into the indicator observing correct polarity (positive pole
first).
- Screw the battery compartment cover
4
back onto the indicator.
8. Technicaldata
- regulation: DIN EN 61010-1, DIN EN 61326
- nominal voltage/frequency range: 200 V to 1,000 V AC/45 Hz to 65 Hz
- overvoltage category: CAT III 1,000 V/CAT IV 600 V
- contamination level: 2
- protection category: IP 40 (DIN EN 60529) means:
Protection against access to dangerous parts and protection against solid impurities of a diameter
> 1.0 mm, (4 - first index).
No protection against water, (0 - second index).
- operating temperature range: - 0 °C to + 40 °C, air humidity ≤ 80 %
- storage temperature range: - 20 °C to + 60 °C, air humidity ≤ 80% (without batteries)
- dimensions of the indicator (L x W x H): approx. 152 x 22 x 18 mm
- weight: approx. 40 g (incl. batteries)
- battery type: 2 x micro, LR03/AAA (1.5 V)
The BENNING VT 1 phase indicator and cable break detector does not work with the battery being
exhausted!
9. General maintenance
Clean the exterior of the device with a clean dry cloth.
If there is contamination or deposits in the area of the battery or the battery housing, clean these areas
as well by means of a dry cloth. If the device is stored for a longer period of time, remove the batteries
from the device!
10. Environmental protection
At the end of product life, dispose of the unserviceable device as well as used batteries via
appropriate collecting facilities provided in your community.

Chat with your Benning VT 1 manual using AI

Get instant AI answers from your Benning VT 1 manual

Ask anything about the Benning VT 1. Answers come from this manual, with the pages they are based on.

VT 1 Maintenance Schedule

Before and after each use
Perform functional check

Check the device for correct functioning immediately before and after every use using a known voltage source.

Show in the manual (page 10)
As needed
Replace batteries

Replace batteries when the red LED indication or acoustic signal becomes weak. Use two Micro LR03/AAA batteries.

Show in the manual (page 10)
Periodically / When dirty
Clean housing and battery compartment

Clean the exterior of the device with a clean dry cloth. Clean contamination in the battery area with a dry cloth.

Show in the manual (page 11)
During long-term storage
Remove batteries during storage

If the device is stored for a longer period of time, remove the batteries from the device to prevent damage.

Show in the manual (page 11)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend VT 1?

Yes No
0
User Pic

Kayleigh Altenwerth

7 months ago

Does the side-specific shutdown check function reliably?

0
User Pic

Manual.ly

6 months ago

Yes, the side-specific shutdown check feature is designed to work effectively. Users have confirmed that it accurately verifies the shutdown status on each side, ensuring proper operation and safety.

M: QW-35-FL
M: QW-35-FL

Frequently Asked Questions

A

No, the BENNING VT1 is designed exclusively for alternating current (AC). It detects electric fields generated by phase voltages starting from approximately 200 V AC. Direct voltage (DC) fields will not be recognized by this device.

Is this answer helpful?

A

You should replace the batteries immediately if the red LED indicator becomes dim or if the acoustic signal becomes weak. A functional check on a known voltage source is recommended before every use to ensure reliability.

Is this answer helpful?

A

Yes, provided you follow all safety instructions. The device is rated for CAT III 1000 V and CAT IV 600 V environments. However, it must only be used by qualified electricians, and you must never touch the white probe tip while testing.

Is this answer helpful?

A

No, you cannot use the BENNING VT1 to confirm the absence of voltage. It only indicates the presence of a phase. To determine if a circuit is de-energized, you must use a certified two-pole voltage tester compliant with DIN EN 61243-3.

Is this answer helpful?

A

The BENNING VT1 requires two Micro batteries, specifically type LR03 or AAA (1.5 V). They must be inserted with the correct polarity, positive pole facing forward, into the battery compartment.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Non-contact operation ensures high safety for the user by preventing direct contact with live parts.
  • Dual indication system with both visual LED and audible tone provides clear confirmation of phase presence.
  • Capable of detecting cable breaks and interruptions in live lines without cutting insulation.
  • Always active design with low current consumption extends battery life and readiness for use.
  • Robust construction meets CAT III 1000V and CAT IV 600V overvoltage categories for professional environments.
VS

Disadvantages

  • Cannot verify the absence of voltage; a separate two-pole tester is required for safety verification.
  • Does not detect direct current (DC) voltages, limiting its use to AC systems only.
  • Performance can be affected by excessive distance, thick insulation, or heavy shielding around conductors.
  • Requires frequent battery replacement when signals weaken, as there is no power switch to turn off.
  • Not suitable for unqualified personnel; strictly intended for use by trained electricians.
M: QW-35-FL

Product Specification

Measurement range

200-1000V

M: QW-35-FL

Product Description

Benning VT1 Non-contact Phase Tester - Read, Download & Print Free

The Benning VT1 Non-contact Phase Tester is an essential tool for qualified electricians who need to quickly and safely identify live phases in electrical installations. Designed with a focus on user safety and reliability, this device allows professionals to detect alternating voltage fields without making direct physical contact with the conductor. This feature significantly reduces the risk of accidental short circuits or electric shocks during routine checks.

Operating within a nominal voltage range of 200 V to 1,000 V AC, the BENNING VT1 responds to frequencies between 45 Hz and 65 Hz. When an electric field is detected, the device provides immediate feedback through a bright red LED located at the probe tip and an audible acoustic signal. The intensity of both the light and sound increases as the voltage strength rises, giving the operator a clear indication of the presence and magnitude of the phase voltage.

Beyond simple phase detection, the Benning VT1 serves as a cable break detector. By sliding the probe along an insulated line from the power source towards the end, users can locate interruptions such as broken wires in cable reels or defective bulbs in lighting chains. The moment the signal stops, the exact location of the break has been found. It is important to note that this device does not confirm the absence of voltage; it only indicates presence. For verifying that a circuit is truly dead, a two-pole voltage tester must be used.

Safety is paramount in the design of this instrument. It features a protective insulation class II construction and includes a grip limit to ensure hands never touch the sensitive white probe tip during operation. The unit is always active, utilizing a special low-power circuit to maximize battery life, though it requires fresh AAA batteries to function correctly. With its compact dimensions and lightweight build, it fits easily into any toolkit while meeting rigorous industrial standards like DIN EN 61010-1.

Important Notes

  • Always perform a functional test on a known live source before and after using the device.
  • Do not use the tester if the battery compartment is open or if indicators are weak.
  • The device cannot detect DC voltage fields.
  • Ensure proper distance from the conductor; thick insulation or shielding may prevent detection.
M: QW-35-FL

© Copyright 2026 Manual.ly