Manual.ly Logo

Benning MM 5-1 Manual

0.0 · 0 Ratings

PDF manual · 137 Pages

English

M: QW-35-FL
page

/ 137

Loading...
109c1933695fa1714032b8c4405a5d0ae7d5 page 1e
02/ 2020
BENNING MM 5-1/ 5-2
30
9.5 Calibration
Benning guarantees compliance with the technical and accuracy specifications
stated in the operating manual for the first 12 months after the delivery date.
To maintain the specified accuracy of the measurement results, the instrument
must be recalibrated at regular intervals by our factory service. We recommend
a recalibration interval of one year. Send the appliance to the following address:
Benning Elektrotechnik & Elektronik GmbH & CO. KG
Service Centre
Robert-Bosch-Str. 20
D - 46397 Bocholt
9.6 Spare parts
Fuse F 15 A, 600 V, 50 kA, D = 10.3 mm, L = 38.1 mm, P.no. 10149447
10. How to use the protective rubber holster
- The safety measuring leads can be stored by coiling them round the protec-
tive rubber holster
M
and clipping the probe into the holster
M
so that they
are sufficiently protected (see fig. 15)
- You can clip one lead onto the protective rubber holster
M
in such a way that
the measuring probe projects. This allows you to bring the measuring probe
and the BENNING MM 5-1/ MM 5-2 up to the measuring point together.
- The support at the back of the holster
M
can be used to prop the
BENNING MM 5-1/ MM 5-2 up in a diagonal position (to make reading
easier) (see fig. 16).
- The protective rubber holster
M
is provided with a magnet which can be
used for suspension.
See fig. 15: Winding up the safety measuring leads
See fig. 16: Standing up the BENNING MM 5-1/ MM 5-2
11. Technical data of the measuring accessories
- Standard: EN 61010-031,
- Maximum rated voltage to earth () and measuring category:
With push-on caps: 1000 V CAT III, 600 V CAT IV,
Without push-on caps: 1000 V CAT II,
- Maximum rated current: 10 A,
- Protective class II (
), continuous double or reinforced insulation,
- Contamination class: 2,
- Length: 1.4 m, AWG 18,
- Environmental conditions:
Maximum barometric elevation for making measurements: 2000 m,
Temperatures: 0 °C to + 50 °C, humidity 50 % to 80 %
- Only use the measuring leads if in perfect and clean condition as well as
according to this manual, since the protection provided could otherwise be
impaired.
- Throw the measuring lead out if the insulation is damaged or if there is a
break in the lead/ plug.
- Do not touch the bare contact tips of the measuring lead. Only grab the area
appropriate for hands!
- Insert the angled terminals in the testing or measuring device.
12. Environmental notice
At the end of the product’s useful life, please dispose of it at
appropriate collection points provided in your country.

Chat with your Benning MM 5-1 manual using AI

Get instant AI answers from your Benning MM 5-1 manual

Ask anything about the Benning MM 5-1. Answers come from this manual, with the pages they are based on.

MM 5-1 Maintenance Schedule

Remind me when maintenance is due
Yearly
Calibrate the device at factory service

Send the instrument to Benning Service Center for recalibration to maintain specified accuracy. Recommended interval is one year.

Show in the manual (page 30)
Regularly
Clean the housing exterior

Wipe the outside of the unit with a clean dry cloth. Do not use solvents or abrasives.

Show in the manual (page 29)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend MM 5-1?

Yes No

Frequently Asked Questions

A

The Benning MM 5-1 can safely measure voltages up to 600 V DC or AC in Category III circuits and up to 300 V in Category IV circuits relative to ground.

Is this answer helpful?

A

No, the Benning MM 5-1 model does not have built-in temperature measurement capabilities. This feature is available on the Benning MM 5-2 model which supports a K-type thermocouple.

Is this answer helpful?

A

Turn the device off, remove the rubber holster, unscrew the back cover, take out the old batteries, insert new 1.5 V micro batteries with correct polarity, and reassemble the unit.

Is this answer helpful?

A

The VoltSensor function allows you to detect the presence of AC voltage against earth without making physical contact, indicated by a red LED and a symbol on the display.

Is this answer helpful?

A

No, the device is designed strictly for dry environments. Using it in wet conditions or high humidity can compromise safety and accuracy.

Is this answer helpful?

A

Benning recommends recalibrating the device every year to maintain the specified measurement accuracy and compliance with technical specifications.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • True RMS measurement technology for accurate readings on non-sinusoidal signals
  • VoltSensor function allows non-contact AC voltage detection
  • Durable design with protective rubber holster and magnetic holder
  • Smart HOLD and Peak value storage for capturing transient data
  • Complies with CAT III 600V and CAT IV 300V safety standards
VS

Disadvantages

  • Battery life may decrease significantly in cold temperatures
  • No built-in temperature measurement (requires separate sensor)
  • Cannot measure frequency on current inputs without specific setup
  • Requires manual fuse replacement for overload protection
  • Limited to dry environments only, no water resistance
M: QW-35-FL

Product Specification

Measurement Range

max. 600V, max. 100MΩ

Package Contents

Bag

M: QW-35-FL

Product Description

The Benning MM 5-1 Multimeter: Precision and Safety in Every Measurement

The Benning MM 5-1 Multimeter stands as a reliable tool for electricians and technically trained individuals who require accurate diagnostics in dry environments. Designed with safety as a priority, this device supports measurements up to 600 V DC/AC, adhering to strict overvoltage categories III and IV standards. Its robust construction includes a protective rubber holster that not only shields the unit from mechanical damage but also features an integrated magnet for hands-free operation and a stand for easier reading.

This digital multimeter offers a comprehensive suite of functions including direct voltage, alternating voltage, resistance, diode testing, and continuity checks with an audible buzzer. The large 4-digit LCD display ensures clear visibility of readings, while features like Smart HOLD and Peak value storage allow users to capture transient data effortlessly. The inclusion of a VoltSensor function enables non-contact detection of AC voltages against earth, adding a layer of convenience and safety during phase identification tasks. With a measurement rate of two per second and automatic range selection, the Benning MM 5-1 streamlines complex electrical troubleshooting into a seamless process.

Powering the device are two standard 1.5 V micro batteries, providing approximately 300 hours of continuous use. The unit is equipped with a battery indicator that alerts users when replacement is needed, preventing inaccurate readings due to low power. Whether checking circuits, testing components, or diagnosing faults, the Benning MM 5-1 delivers consistent performance backed by a one-year calibration guarantee from the manufacturer.

Key Features Summary

The Benning MM 5-1 combines durability with advanced functionality. Its True RMS technology ensures accurate readings even on non-sinusoidal waveforms within specified limits. The device complies with EU directives and features double insulation for enhanced user protection. Maintenance is straightforward, with easy access for battery and fuse replacement, ensuring long-term reliability in professional settings.

Important Notes

Always ensure the device is de-energized before opening it for maintenance. Magnets inside the unit can affect pacemakers, so keep a safe distance if you have such medical implants. Do not use the device in wet conditions or beyond its rated voltage limits.

M: QW-35-FL

© Copyright 2026 Manual.ly