Manual.ly Logo

Worx WX531 Manual

0.0 · 0 Ratings

PDF manual · 176 Pages

English

M: QW-35-FL
page

/ 176

Loading...
2e5fadf0654c313c12b976fa9ea14bd502cc page a
EN20V Cordless Brushless Circular saw
10
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may affect the power
tool’s operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
h) Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in
unexpected situations.
5) Battery tool use and care
a) Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may create
a risk of fire when used with another battery
pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to
fire or excessive temperature. Exposure
to fire or temperature above 130 °C may cause
explosion.
g) Follow all charging instructions and
do not charge the battery pack or tool
outside the temperature range specified
in the instructions. Charging improperly or
at temperatures outside the specified range
may damage the battery and increase the risk
of fire.
6) Service
a) Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
b) Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or authorized
service providers.
SAFETY INSTRUCTIONS
FOR ALL SAWS
CUTTING PROCEDURES
a)
DANGER: Keep hands away from
cutting area and the blade. If both
hands are holding the saw, they cannot be cut by
the blade.
b) Do not reach underneath the workpiece.
The guard cannot protect you from the blade
below the workpiece.
c) Adjust the cutting depth to the thickness
of the workpiece. Less than a full tooth of
the blade teeth should be visible below the
workpiece.
d) Never hold the workpiece in your hands
or across your leg while cutting. Secure
the workpiece to a stable platform. It
is important to support the work properly to
minimise body exposure, blade binding, or loss
of control.
e) Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting tool may contact
hidden wiring. Contact with a “live” wire will
also make exposed metal parts of the power tool
“live” and could give the operator an electric
shock.
f) When ripping, always use a rip fence
or straight edge guide. This improves the
accuracy of cut and reduces the chance of blade
binding.
g) Always use blades with correct size and
shape (diamond versus round) of arbour
holes. Blades that do not match the mounting
hardware of the saw will run off-centre, causing
loss of control.
h) Never use damaged or incorrect blade
washers or bolt. The blade washers and
bolt were specially designed for your saw, for
optimum performance and safety of operation.
FURTHER SAFETY
INSTRUCTIONS FOR ALL
SAWS
Kickback causes and related warnings

Chat with your Worx WX531 manual using AI

Get instant AI answers from your Worx WX531 manual

Ask anything about the Worx WX531. Answers come from this manual, with the pages they are based on.

WX531 Maintenance Schedule

Before each use
Check lower guard for proper closing and free movement

Ensure the lower guard moves freely and closes instantly. Do not operate if it does not close or is bent.

Show in the manual (page 11)
Before each use
Inspect saw blades for damage

Check for chips, cracks, dullness, or damage. Replace if necessary to prevent kickback and ensure safety.

Show in the manual (page 12)
Regularly
Clean air vents of dust accumulation

Remove dust from motor ventilation slots to prevent electrical hazards caused by excessive metal powder buildup.

Show in the manual (page 18)
Periodically
Clear dust and chips from guard and base plate

Remove accumulated sawdust and debris from the blade guard and base to ensure proper performance and operation.

Show in the manual (page 18)
As needed
Keep cutting tools sharp and clean

Maintain sharp edges on blades to reduce binding and improve control. Use only recommended sharp blades.

Show in the manual (page 10)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WX531?

Yes No

Frequently Asked Questions

A

The saw accepts 115mm diameter blades with a 9.5mm arbor hole. It supports TCT blades for wood, HCS blades for softer materials, and abrasive diamond discs for tiles and masonry.

Is this answer helpful?

A

No, the battery and charger are not included in the standard package. You must purchase them separately or use an existing Worx 20V PowerShare battery if you own other compatible tools.

Is this answer helpful?

A

Yes, by swapping the standard wood blade for the appropriate accessory. Use an abrasive diamond disc for cutting tiles and metal, ensuring the rated speed matches the tool's 6900 RPM.

Is this answer helpful?

A

The maximum cutting depth at 90 degrees is 41mm. At a 45-degree bevel angle, the depth reduces to 29.5mm, allowing for versatile joinery and structural cuts.

Is this answer helpful?

A

Yes, the Worx WX531 features a dedicated dust extraction outlet. You can connect it to a shop vacuum using the included adapter to keep the work area clean and improve visibility.

Is this answer helpful?

A

The machine weighs 1.71kg as a bare tool. Adding a battery will increase the total weight depending on the capacity of the 20V PowerShare pack used.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Brushless motor delivers high speed and long life
  • Compatible with all Worx 20V PowerShare batteries
  • Lightweight at 1.71kg for easy handling
  • Automatic pendulum guard enhances user safety
  • Includes parallel guide for accurate straight cuts
VS

Disadvantages

  • Battery and charger sold separately
  • Dust collection requires external vacuum attachment
  • Blade size limited to 115mm diameter
  • No onboard storage for hex key or wrench
  • Bevel adjustment range stops at 46 degrees
M: QW-35-FL

Product Specification

Type

Circular saw

No-load speed

6900 rpm

Blade diameter

4.53 in

Cutting capacity

1.61 in (cut depth at 0°), 1.16 in (cut depth at 45° tilt)

Bevel range

0-46°

Arbor

3/8 in bore, spindle lock

Features

Fence, dust extraction, bevel function

Weight

3.77 lb (without battery)

M: QW-35-FL

Product Description

Worx WX531 20V PowerShare Hand Circular Saw: Precision and Power in Your Hands

The Worx WX531 20V PowerShare Hand Circular Saw represents a significant leap in portable woodworking tools, designed for both professional contractors and serious DIY enthusiasts. This cordless powerhouse eliminates the constraints of cords while delivering robust performance through its brushless motor technology. The integration with the Worx PowerShare system allows users to utilize compatible batteries across a wide range of tools, ensuring maximum versatility and convenience on any job site.

Equipped with a high-speed brushless motor, this saw achieves an impressive no-load speed of 6900 RPM. This power translates into clean, efficient cuts through wood, metal, aluminum, and even tiles when paired with the appropriate blade. The machine features a cutting depth of 41mm at 90 degrees and 29.5mm at a 45-degree bevel, providing ample capability for most framing and finishing tasks. Its lightweight design, weighing only 1.71kg without the battery, ensures reduced operator fatigue during extended use.

Safety is paramount in the design of the WX531. It includes a pendulum lower guard that automatically retracts during operation and snaps back instantly to cover the blade when released. The tool also features a safety switch and an on/off trigger to prevent accidental starts. A parallel guide is included to ensure straight, accurate rip cuts, while adjustable depth and angle levers allow for precise customization. Dust extraction capabilities are integrated via a vacuum adapter, helping to maintain a cleaner workspace and improve visibility.

Whether you are building a deck, framing a wall, or cutting ceramic tiles, the Worx WX531 offers the reliability and control needed for professional results. Its compatibility with various 20V batteries means you can choose the capacity that suits your specific project duration, from 1.5Ah packs for light duty to 4.0Ah units for heavy-duty applications. This saw stands as a testament to modern engineering, combining safety, efficiency, and portability into one compact unit.

M: QW-35-FL

© Copyright 2026 Manual.ly