Manual.ly Logo

Worx WX529.9 Manual

0.0 · 0 Ratings

PDF manual · 96 Pages

English

M: QW-35-FL
page

/ 96

Loading...
e5ea7af1a1ad046e8db3a116ef39fccd7efd page a
Lithium-Ion cordless circular saw
EN
10
ASSEMBLY
Saw blade Assembly and
Removing
WARNING: Always
remove the battery
before changing the blade!
See Fig. B
Hex key storage See Fig. C
Safety On/Off switch
WARNING: To avoid
cutting injury from the
sharp blade, please don’t put
your hands around the Base
Plate.
See Fig. D
Cutting depth adjusting See Fig. E
Cutting guide See Fig. F
Bevel cuts See Fig. G
Sawdust removal See Fig. H
WORKING HINTS FOR YOUR
TOOL
If your power tool becomes too hot, please run your
circular saw no load for 2-3 minutes to cool the
motor. Avoid prolonged usage at very low speeds.
Protect saw blades against impact and shock. Cutting
with extreme force can significantly reduces the
performance capability of the tool and reduces the
service life of the saw blade. Sawing performance
and cutting quality depend essentially on the
condition and the tooth count of the saw blade.
Therefore, use only sharp saw blades that are suited
for the material being cut.
Choice of blades: 24 teeth for general work, approx.
40 teeth for finer cuts, more than 40 teeth for very
fine cuts into delicate surfaces, diamond for tile,
cement board, etc.
Only use saw blades recommended.
MAINTAIN TOOLS WITH
CARE
Remove the battery before carrying out any
adjustment, servicing or maintenance.
Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and
changing accessories. Inspect tool cords periodically
and if damaged, have repaired by authorized service
facility. Your power tool requires no additional
lubrication or maintenance. There are no user
serviceable parts in your power tool. Never use water
or chemical cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your power tool
in a dry place. Keep the motor ventilation slots clean.
Keep all working controls free of dust.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Periodically clear dust and chips from guard and
base to ensure proper performance.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.

Chat with your Worx WX529.9 manual using AI

Get instant AI answers from your Worx WX529.9 manual

Ask anything about the Worx WX529.9. Answers come from this manual, with the pages they are based on.

WX529.9 Maintenance Schedule

Before each use
Check lower guard for proper closing

Ensure the lower guard moves freely and closes instantly. Do not operate if it does not close automatically or is damaged.

Periodically
Inspect tool cords

Check power cords regularly for damage. If damaged, have them repaired by an authorized service facility to avoid hazards.

Show in the manual (page 10)
Periodically
Clear dust and chips from guard and base

Remove accumulated sawdust and debris from the blade guard and base plate to ensure proper performance of the saw.

Show in the manual (page 10)
As needed
Wipe battery terminals with a clean dry cloth

Clean the battery pack terminals if they become dirty to maintain good electrical contact and prevent issues.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WX529.9?

Yes No

Frequently Asked Questions

A

The solo package includes the circular saw unit, a TCT blade, a dust adapter, and a hex key. It does not include a battery or charger, which must be purchased separately.

Is this answer helpful?

A

Yes, this saw is part of the Worx PowerShare system. You can use any Worx 20V Max Li-ion battery pack that fits the tool's battery slot.

Is this answer helpful?

A

Always remove the battery pack first. Press the spindle lock button to hold the shaft, then use the hex key to loosen the blade bolt. Replace the blade ensuring the flanges are tight before reinserting the battery.

Is this answer helpful?

A

The maximum cutting depth at a 90-degree angle is 45mm. At a 45-degree bevel angle, the maximum depth is reduced to 33mm.

Is this answer helpful?

A

No, the standard kit does not include a rip fence. You will need to purchase one separately or use a straight edge guide for accurate ripping cuts.

Is this answer helpful?

A

You should periodically clear dust and chips from the guard and base plate to ensure proper performance and prevent binding during operation.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Compatible with all Worx 20V PowerShare batteries for maximum versatility
  • Lightweight design at 2.37kg reduces operator fatigue during long tasks
  • Bevel capacity ranges from 0 to 50 degrees for complex angled cuts
  • Includes a dust adapter for improved workspace cleanliness
  • No-load speed of 3600 RPM ensures fast and efficient cutting performance
VS

Disadvantages

  • Solo kit excludes battery and charger requiring separate purchase
  • Maximum cutting depth limited to 45mm which may restrict thick material work
  • Vibration levels require anti-vibration accessories for prolonged use
  • Dust collection is optional and requires a separate vacuum attachment
  • Blade size is fixed at 150mm limiting options for larger diameter blades
M: QW-35-FL

Product Specification

Type

Hand circular saw

Battery

20V, Li-ion

No-load speed

3600 rpm

Blade diameter

5.91 in

Cutting capacity

1.77 in (cut depth at 0°), 1.18 in (cut depth at 45° tilt)

Bevel angle

0-50°

Arbor

16mm hole, spindle lock

Features

Soft grip, auxiliary handle, dust extraction, bevel function

Weight

5.23 lbs

Package contents

without charger and battery

M: QW-35-FL

Product Description

Worx WX529.9 20V PowerShare Cordless Circular Saw Solo Manual Review

The Worx WX529.9 20V PowerShare Cordless Circular Saw Solo is a versatile tool designed for DIY enthusiasts and professional woodworkers who demand precision without the tether of a power cord. This saw operates on the Worx PowerShare system, allowing users to utilize compatible 20V batteries from across the Worx lineup, offering exceptional flexibility for various projects around the home or job site.

At the heart of this machine is a powerful motor capable of reaching a no-load speed of 3600 RPM. It features a 150mm TCT blade that ensures clean cuts through wood, plastic, and other soft materials. The base plate allows for bevel adjustments ranging from 0 to 50 degrees, enabling angled cuts with ease. A depth adjustment scale helps users set precise cutting depths up to 45mm at 90 degrees and 33mm at 45 degrees. The inclusion of a dust adapter makes it easier to maintain a cleaner workspace by connecting to a vacuum system.

Safety is a top priority with the WX529.9. It includes a lower guard lever that automatically retracts during cutting and covers the blade when not in use. An on/off switch with a lock-off button prevents accidental activation. The ergonomic front handle provides better control, while the spindle lock button simplifies blade changes. Users should always wear appropriate safety gear, including eye protection, hearing protection, and a dust mask, as per the manual instructions.

This solo kit does not include a battery or charger, focusing solely on the tool itself. However, its lightweight design at approximately 2.37kg (without battery) reduces user fatigue during extended use. Whether you are ripping lumber or making cross-cuts, this saw delivers reliable performance when paired with a fully charged Worx 20V battery.

Important Notes

  • Always remove the battery before changing blades or performing maintenance.
  • Ensure the lower guard moves freely before each use.
  • Use only recommended TCT blades for optimal safety and cut quality.
M: QW-35-FL

© Copyright 2026 Manual.ly