Manual.ly Logo

Worx WX527 Manual

0.0 · 0 Ratings

PDF manual · 132 Pages

English

M: QW-35-FL
page

/ 132

Loading...
e707d5cf4be3fb0a1b308d59463d079fb2be page 7
Lithium-Ion Cordless Circular Saw
EN
7
PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING! Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
h) Do not let familiarity gained from frequent
use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can cause severe
injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application. The
correct power tool will do the job better and safer
at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and any

Chat with your Worx WX527 manual using AI

Get instant AI answers from your Worx WX527 manual

Ask anything about the Worx WX527. Answers come from this manual, with the pages they are based on.

WX527 Maintenance Schedule

Before each use
Check guard closing and movement

Verify the lower guard closes properly and moves freely before every use. Do not operate if it does not enclose the blade instantly.

Periodically
Inspect power cord for damage

Inspect tool cords periodically. If damaged, have repaired by authorized service facility to avoid electric shock hazard.

Show in the manual (page 13)
Periodically
Clear dust from guard and base

Remove accumulated dust and chips from the guard and base plate regularly to ensure proper performance of the saw.

Show in the manual (page 13)
As needed
Wipe battery terminals

If battery pack terminals become dirty, wipe them with a clean dry cloth to maintain good electrical contact.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WX527?

Yes No

Frequently Asked Questions

A

The Worx WX527 uses the Worx PowerShare 20V Lithium-Ion battery system. It is compatible with all batteries in the Worx 20V lineup, allowing you to use interchangeable power sources from drills, lights, and other tools.

Is this answer helpful?

A

Yes, the Worx WX527 can cut metal if you install the appropriate HSS blade. However, it is primarily designed for wood. When cutting metal, ensure the blade is sharp and rated for the specific metal type to avoid binding or kickback.

Is this answer helpful?

A

First, remove the battery pack for safety. Press the spindle lock button to hold the blade stationary. Use the included hex key to loosen the blade bolt, remove the outer flange, replace the blade, and then reassemble the flange and bolt securely before reinstalling the battery.

Is this answer helpful?

A

In many standard kits, the Worx WX527 is sold as a bare tool without a battery or charger. You must purchase these separately unless specified as part of a combo kit. Check the product listing carefully to confirm what is included in the box.

Is this answer helpful?

A

The maximum cutting depth of the Worx WX527 is 27mm. This depth is sufficient for most residential woodworking projects involving lumber and plywood, but it may be insufficient for very thick timbers or heavy-duty construction beams.

Is this answer helpful?

A

Yes, the saw features a vacuum adapter and a dust extraction outlet. You can connect a shop vacuum to collect sawdust directly from the source, helping to keep your work area clean and improving visibility while cutting.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Compatible with all Worx 20V PowerShare batteries for maximum flexibility
  • Includes a vacuum adapter for effective dust extraction and cleaner workspaces
  • Soft grip handle provides enhanced comfort and control during operation
  • Compact and lightweight design makes it easy to maneuver for detailed cuts
  • Integrated parallel guide ensures accurate and straight ripping cuts
VS

Disadvantages

  • Maximum cutting depth is limited to 27mm which may restrict thicker material work
  • Battery and charger are sold separately in some configurations requiring additional investment
  • Blade size is smaller than standard 184mm saws limiting cut width on large panels
  • May experience reduced power when using older or depleted battery packs
  • Noise level of 92dB requires ear protection for prolonged usage periods
M: QW-35-FL

Product Specification

Type

Circular saw

No-load speed

2500 rpm

Blade diameter

3.35 in

Cutting capacity

1.06 in (cutting depth at 0 degrees)

Tool holder

Bore 0.59 in, spindle lock

Features

Soft grip, guide fence, dust extraction

Weight

3.20 lbs

M: QW-35-FL

Product Description

Worx WX527 20V PowerShare Cordless Hand Circular Saw Review

The Worx WX527 is a versatile Lithium-Ion cordless circular saw designed for precision cutting in wood and other materials. This tool features a compact design with a soft grip handle that ensures comfort during extended use. The saw operates at a no-load speed of 2500 RPM, allowing it to slice through wood up to 27mm thick with ease. Its 85mm TCT blade is optimized for general work, delivering clean cuts across various project types.

One of the standout features of the WX527 is its compatibility with the Worx PowerShare system. Users can utilize any 20V battery from the Worx lineup, providing flexibility and convenience for professionals and DIY enthusiasts alike. The inclusion of a vacuum adapter allows for dust extraction, keeping your workspace cleaner and reducing health hazards associated with sawdust inhalation. The parallel guide ensures straight cuts, making it ideal for ripping tasks where accuracy is paramount.

Safety is a top priority with this model. It includes an upper fixed guard and a lower retractable guard that automatically covers the blade when not cutting. The tool also features a spindle lock for easy blade changes and a safety switch to prevent accidental activation. Proper maintenance involves keeping the base plate free of debris and ensuring the blade remains sharp for optimal performance.

Important Notes

  • Always remove the battery before changing blades or performing maintenance.
  • Use only recommended blades to prevent kickback and ensure safety.
  • Store the tool in a dry place to protect the motor and electronics.
M: QW-35-FL

© Copyright 2026 Manual.ly