Manual.ly Logo

Worx WX445 Manual

0.0 · 0 Ratings

PDF manual · 144 Pages

English

M: QW-35-FL
page

/ 144

Loading...
8d4ea7e1d2824b596f3713c0e045fd246045 page d
Circular saw with laser EN
13
extraction outlet until it latches. Additionally
fasten the vacuum adapter (17) to the fixed
guard with the two screws. Directly connect a
suitable vacuum hose to the adapter.
• The vacuum adapter must not
be mounted when no external dust
extraction is connected. Otherwise
there is danger of the extraction system
becoming clogged.
Clean the vacuum adapter regularly to
ensure optimum dust extraction. The vacuum
cleaner must be suitable for the material to be
worked.
5. HEX KEY STORAGE (See Fig I)
The hex key is stored at the rear of the circular
saw. Put the key back when not in use.
6. USING THE LASER GUIDE (See Fig J)
WARNING: Never stare directly into
the laser beam and never point the
beam at anybody. The laser beam energy is
extremely harmful to human eyes.
Push the laser on/off switch (3) to ‘I’ to turn the
laser on. The laser device can provide a beam
in the same plane as the blade, which projects
onto the workpiece to generate a line. The
saw blade can be directed to follow the line in
order to align the cut. Either straight cutting
or bevel cutting, it will make more precise
movement during operation.
Push the laser on/off switch (3) to ‘0’ to turn
the laser off.
NOTE: Clean the laser generator periodically.
7. ACCESSIBLE MOTOR BRUSH
REPLACEMENT (See Fig K)
There are two replaceable motor brushes
which can be easily accessed on either the
front or back of the motor housing.
WARNING: Disconnect the plug
from the power source before making
any adjustments, changing accessories, or
storing power tools. Such preventative safety
measures reduce the risk of starting the power
tool accidentally.
ATTENTION: When servicing a tool,
always use only genuine
replacement parts
1. Locate the plastic motor brush access caps
on either the front or back of the motor
housing.
2. Remove the threaded access cap using a
flat head screwdriver and turn in a counter-
clockwise rotation to loosen. Do not apply
excessive force as this may damage the
access plug.
3. Remove the old motor brush.
4. Insert the new motor brush making sure
that it is completing inserted into the brush
holder.
5. Replace the access cap with the flat-head
screwdriver turning clockwise to tighten.
WORKING HINTS FOR YOUR
CIRCULAR SAW
If your power tool becomes too hot, please
run your circular saw no load for 2-3 minutes
to cool the motor. Avoid prolonged usage at
very low speeds.
Protect saw blades against impact and shock.
Excessive feed significantly reduces the
performance capability of the machine and
reduces the service life of the saw blade.
Sawing performance and cutting quality
depend essentially on the condition and the
tooth form of the saw blade. Therefore, use
only sharp saw blades that are suited for the
material to be worked.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your tool requires no additional lubrication or
maintenance. There are no user serviceable
parts in your tool. Never use water or chemical
cleaners to clean your tool. Wipe clean with
a dry cloth. Always store your tool in a dry
place. Keep the motor ventilation slots clean.
Occasionally you may see sparks through the
ventilation slots. This is normal and will not
damage your power tool.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.

Chat with your Worx WX445 manual using AI

Get instant AI answers from your Worx WX445 manual

Ask anything about the Worx WX445. Answers come from this manual, with the pages they are based on.

WX445 Maintenance Schedule

Before each use
Check lower guard for proper closing

Ensure the lower guard moves freely and closes instantly. Do not operate if it does not close properly.

Show in the manual (page 10)
Regularly
Clean the vacuum adapter

Clean the dust extraction adapter regularly to ensure optimum dust extraction performance.

Show in the manual (page 13)
Periodically
Clean the laser generator

Clean the laser generator periodically to maintain visibility of the guide line.

Show in the manual (page 13)
As needed
Keep motor ventilation slots clean

Wipe the tool with a dry cloth and keep motor ventilation slots free of dust and debris.

Show in the manual (page 13)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WX445?

Yes No

Frequently Asked Questions

A

The Worx WX445 can cut up to 66mm deep at a 90-degree angle. For the WX445.1 model, the maximum depth is 64mm.

Is this answer helpful?

A

Locate the plastic access caps on the front or back of the motor housing. Remove them with a flathead screwdriver, take out the old brushes, insert new ones fully, and secure the caps back in place.

Is this answer helpful?

A

No, this saw is designed exclusively for wood cutting. Using metal or stone blades can cause damage and is unsafe.

Is this answer helpful?

A

Yes, staring directly into the Class 2 laser beam can cause flash blindness. Never aim it at people or reflective surfaces.

Is this answer helpful?

A

You must inspect the lower guard before every use to ensure it closes instantly and moves freely without obstruction.

Is this answer helpful?

A

The saw operates on a rated voltage of 220-240V at 50/60Hz.

Is this answer helpful?

A

Standard delivery includes the saw, blade, parallel guide, hex key, and vacuum adapter, but not a carrying case.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Integrated laser guide ensures highly accurate cuts
  • Powerful 1600W motor handles tough wood efficiently
  • Ergonomic dual-handle design offers superior control
  • Vacuum adapter supports effective dust extraction
  • Adjustable base plate allows bevel cuts up to 51 degrees
VS

Disadvantages

  • Laser battery may require frequent replacement over time
  • Heavy vibration levels may cause fatigue during prolonged use
  • No built-in LED light for dark work areas
  • Blade size varies slightly between WX445 and WX445.1 models
  • Requires external vacuum hose for optimal dust collection
M: QW-35-FL

Product Specification

Type

Circular saw

Power

1600 W

No-load speed

5000 rpm

Blade diameter

7.48 in

Cutting capacity

2.60 in (cutting depth at 0°), 1.85 in (cutting depth at 45° tilt)

Bevel angle

0-51°

Arbor size

1.18 in

Features

Softgrip, auxiliary handle, guide fence, dust extraction, cutting line laser, bevel function

Weight

9.48 lbs

M: QW-35-FL

Product Description

Worx WX445 Electric Hand Circular Saw - Precision and Power

The Worx WX445 Electric Hand Circular Saw is a robust tool designed for woodworkers who demand accuracy and efficiency. This powerful saw features a 1600-watt motor that delivers a no-load speed of 5000 RPM, ensuring clean cuts through various wood materials. Whether you are tackling long straight cuts or complex bevel angles up to 51 degrees, this saw handles the job with ease.

One of the standout features of the Worx WX445 is its integrated laser guide. This device projects a precise line onto the workpiece, aligning perfectly with the blade path. This visual aid significantly reduces errors and helps users achieve professional-grade results without the need for extensive measuring during every cut. The saw also includes a parallel guide, allowing for consistent rip cuts at set distances from the edge of the material.

Safety is paramount in the design of this tool. It comes equipped with a lower pendulum guard that automatically retracts when cutting begins and covers the blade immediately after. The lock-off button prevents accidental starts, while the spindle lock allows for safe and easy blade changes. Users can adjust the cutting depth easily using the dedicated lever and scale, ensuring only the necessary amount of blade protrudes below the workpiece to minimize kickback risks.

For cleaner workspaces, the Worx WX445 includes a vacuum adapter compatible with dust extraction systems. This feature helps keep the cutting area clear of sawdust, improving visibility and reducing health hazards associated with airborne particles. The ergonomic rear handle and front grip provide excellent control, even during extended use, though users should always wear appropriate eye, ear, and respiratory protection as recommended by safety standards.

Key Notes

  • Always ensure the blade is sharp and suitable for the material being cut.
  • Check that the lower guard moves freely before each operation.
  • Never remove the safety guards or modify the tool's safety mechanisms.
  • Use genuine replacement parts for maintenance tasks like brush replacement.
M: QW-35-FL

© Copyright 2026 Manual.ly