Manual.ly Logo

Worx WX425 Manual

0.0 · 0 Ratings

PDF manual · 148 Pages

English

M: QW-35-FL
page

/ 148

Loading...
fd84d806357d9ffbc89902b51f8da767693f page e
Circular saw EN
1514
Your power tool requires no additional
lubrication or maintenance. There are no user
serviceable parts in your power tool. Never
use water or chemical cleaners to clean your
power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place.
Keep the motor ventilation slots clean. Keep
all working controls free of dust.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or retailer for
recycling advice.
PLUG REPLACEMENT
(UK & IRELAND ONLY)
If you need to replace the fitted plug then
follow the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
Blue - Neutral
Brown - Live
As the colors of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows. The wire which
is coloured
blue must be connected to the terminal which
is marked with N. The wire which is coloured
brown must be connected to the terminal
which is marked with L.
WARNING: Never connect live or
neutral wires to the earth terminal of the
plug. Only fit an approved BS1363/A plug and
the correct rated fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Cable grip
Brown L (live)
13 Amp fuse approved
to BS1362

Chat with your Worx WX425 manual using AI

Get instant AI answers from your Worx WX425 manual

Ask anything about the Worx WX425. Answers come from this manual, with the pages they are based on.

WX425 Maintenance Schedule

Before each use
Check lower guard for proper closing

Verify the lower guard moves freely and closes instantly. Do not operate if it does not close properly or is bent.

Show in the manual (page 10)
Periodically
Clean the laser generator

Clean the laser generator periodically to ensure proper function and visibility of the guide line.

Show in the manual (page 13)
As needed
Replace motor brushes

Access front/rear caps, remove old brushes, insert new ones fully into holders, and tighten caps with screwdriver.

Show in the manual (page 13)
Regularly
Wipe tool with dry cloth

Never use water or chemical cleaners. Wipe the tool clean with a dry cloth after use.

Show in the manual (page 14)
Regularly
Keep ventilation slots clean

Ensure motor ventilation slots are free of dust and debris to prevent overheating.

Show in the manual (page 14)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WX425?

Yes No

Frequently Asked Questions

A

The Worx WX425 can achieve a maximum cutting depth of 55mm at 90 degrees and 38mm at a 45-degree bevel angle.

Is this answer helpful?

A

No, the WX425 model does not have a built-in laser guide. It uses a Beveltrac system for alignment. The WX426 model includes the laser feature.

Is this answer helpful?

A

Press the spindle lock button, use the hex key to loosen the blade bolt, remove the outer flange, rotate the lower guard open, swap the blade ensuring correct direction, then reassemble and tighten securely.

Is this answer helpful?

A

No, the Worx WX425 is designed exclusively for cutting wood and wood-based materials. Using metal blades can damage the tool and cause safety hazards.

Is this answer helpful?

A

Yes, the saw features a vacuum adapter port that accepts 32mm and 35mm hoses, allowing you to connect a dust extraction unit for a cleaner workspace.

Is this answer helpful?

A

Always wear eye protection, hearing protection, and a dust mask. Keep hands away from the blade, ensure the lower guard moves freely, and never cut small pieces by hand.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Powerful 1200W motor delivers high torque for tough cuts
  • Lightweight 3.5kg design reduces user fatigue
  • Soft grip handle ensures comfortable operation
  • Includes vacuum adapter for effective dust extraction
  • Depth and bevel adjustments allow for precise cutting angles
VS

Disadvantages

  • Does not include a laser guide unlike the WX426 model
  • Blade capacity is limited to 55mm depth
  • No anti-vibration accessories included in the box
  • Requires manual alignment without laser assistance
  • Standard blade may need upgrading for specific materials
M: QW-35-FL

Product Specification

Type

Circular saw

Power

1200W

No-load speed

5000 rpm

Blade diameter

6.30 inches

Cutting capacity

2.17 inches (cutting depth at 0 degrees), 1.50 inches (cutting depth at 45 degree tilt)

Bevel range

0-45 degrees

Arbor size

0.63 inch

Features

Softgrip, auxiliary handle, guide fence, dust extraction, bevel function

Weight

7.72 lbs

M: QW-35-FL

Product Description

Worx WX425 Electric Hand Circular Saw Review

The Worx WX425 Electric Hand Circular Saw is a robust and versatile power tool designed for woodworkers who demand precision and reliability. With a powerful 1200W motor spinning at 5000 RPM, this saw effortlessly handles various cutting tasks, from straight crosscuts to angled bevels up to 45 degrees. Its lightweight design of just 3.5kg ensures that users can maneuver the tool with ease, reducing fatigue during extended projects.

One of the standout features of the WX425 is its ergonomic soft grip handle, which provides comfort and control. The machine includes a depth adjustment lever allowing for precise cuts up to 55mm deep, ensuring clean results on thick timber. For those needing parallel cuts, the included guide rail system helps maintain consistent distances from the edge of the workpiece. Safety is paramount, featuring a lower guard that retracts automatically and locks securely when not in use. The inclusion of a vacuum adapter also allows for dust extraction, keeping your workspace cleaner and safer.

While the WX426 model adds a laser guide for enhanced accuracy, the standard WX425 relies on the Beveltrac system for guiding cuts, making it a practical choice for general carpentry. Whether you are building furniture or performing home renovations, this circular saw delivers the performance needed for professional-grade results.

Key Notes

  • Always wear safety gear including eye protection and ear muffs.
  • Ensure the blade is sharp and suitable for the material being cut.
  • Check the lower guard moves freely before every use.
M: QW-35-FL

© Copyright 2026 Manual.ly