Manual.ly Logo

Worx WX425 Manual

0.0 · 0 Ratings

PDF manual · 148 Pages

English

M: QW-35-FL
page

/ 148

Loading...
fd84d806357d9ffbc89902b51f8da767693f page d
Circular saw EN
1312
placed in the storage area located at back of
the base plate.
7. USING THE LASER GUIDE (See Fig. K)
(WX426)
WARNING: Never stare directly into the
laser beam and never point the beam at
anybody. The laser beam energy is extremely
harmful to human eyes.
Push the laser on/off switch (3) to ‘I’ to turn the
laser on. The laser device can provide a beam
in the same plane as the blade, which projects
onto the workpiece to generate a line. The
saw blade can be directed to follow the line in
order to align the cut. Either straight cutting
or bevel cutting, it will make more precise
movement during operation.
Push the laser on/off switch (3) to ‘0’ to turn
the laser off.
NOTE: Clean the laser generator
periodically.
8. ACCESSIBLE MOTOR BRUSH
REPLACEMENT (See Fig. L)
There are two replaceable motor brushes
which can be easily accessed on either the
front or back of the motor housing.
WARNING: Disconnect the plug
from the power source before making
any adjustments, changing accessories, or
storing power tools. Such preventative safety
measures reduce the risk of starting the power
tool accidentally.
ATTENTION: When servicing a
tool, ALWAYS use only genuine
replacement parts
1. Locate the plastic motor brush access
caps on either the front or back of the motor
housing.
2. Remove the threaded access cap using a
flat head screwdriver and turn in a counter-
clockwise rotation to loosen. Do not apply
excessive force as this may damage the
access plug.
3. Remove the old motor brush.
4. Insert the new motor brush making sure
that it is completing inserted into the brush
holder.
5. Replace the access cap with the flat-head
screwdriver turning clockwise to tighten.
WORKING HINTS FOR YOUR
CIRCULAR SAW
If your power tool becomes too hot, run it no
load for 2-3 minutes to cool the motor. Avoid
prolonged usage at very low speeds.
Always use a blade suited to the material and
material thickness to be cut. The quality of cut
will improve as the number of blade teeth
increase. Always ensure the work-piece is
firmly held or clamped to prevent movement.
Support large panels close to the cut line.
Any movement of the material may affect
the quality of the cut. The blade cuts on the
upward stroke and may chip the uppermost
surface or edges of your work piece. When
cutting, ensure your uppermost surface is
a non-visible surface when your work is
finished. Feeding too fast significantly reduces
the performance of the machine and shortens
the life of the saw blade. Always face the
good side of the work piece down to ensure
minimum splintering. Only use sharp saw
blades of the correct type.
For pocket cutting (soft materials only) this
operation requires much skill with a saw and
must only be carried out by a competent
person.
WARNING: The blade teeth are
exposed during this operation, so
operate with extreme caution.
Clearly mark the area to be cut. Set the depth
of cut on the saw. Position the saw over the
marked area with the front edge of the base
plate resting on the work surface and cutting
guide aligned with marked line on workpiece.
Ensure the blade is not touching but is close
to the work surface. The moving lower guard
must be rotated open by using the lever.
Switch on the saw and gently swing the blade
down into the material but maintain a pivoting
force on the front edge of the base. The
moving lower guard can now be released for
normal action of the guard.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.

Chat with your Worx WX425 manual using AI

Get instant AI answers from your Worx WX425 manual

Ask anything about the Worx WX425. Answers come from this manual, with the pages they are based on.

WX425 Maintenance Schedule

Before each use
Check lower guard for proper closing

Verify the lower guard moves freely and closes instantly. Do not operate if it does not close properly or is bent.

Show in the manual (page 10)
Periodically
Clean the laser generator

Clean the laser generator periodically to ensure proper function and visibility of the guide line.

Show in the manual (page 13)
As needed
Replace motor brushes

Access front/rear caps, remove old brushes, insert new ones fully into holders, and tighten caps with screwdriver.

Show in the manual (page 13)
Regularly
Wipe tool with dry cloth

Never use water or chemical cleaners. Wipe the tool clean with a dry cloth after use.

Show in the manual (page 14)
Regularly
Keep ventilation slots clean

Ensure motor ventilation slots are free of dust and debris to prevent overheating.

Show in the manual (page 14)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WX425?

Yes No

Frequently Asked Questions

A

The Worx WX425 can achieve a maximum cutting depth of 55mm at 90 degrees and 38mm at a 45-degree bevel angle.

Is this answer helpful?

A

No, the WX425 model does not have a built-in laser guide. It uses a Beveltrac system for alignment. The WX426 model includes the laser feature.

Is this answer helpful?

A

Press the spindle lock button, use the hex key to loosen the blade bolt, remove the outer flange, rotate the lower guard open, swap the blade ensuring correct direction, then reassemble and tighten securely.

Is this answer helpful?

A

No, the Worx WX425 is designed exclusively for cutting wood and wood-based materials. Using metal blades can damage the tool and cause safety hazards.

Is this answer helpful?

A

Yes, the saw features a vacuum adapter port that accepts 32mm and 35mm hoses, allowing you to connect a dust extraction unit for a cleaner workspace.

Is this answer helpful?

A

Always wear eye protection, hearing protection, and a dust mask. Keep hands away from the blade, ensure the lower guard moves freely, and never cut small pieces by hand.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Powerful 1200W motor delivers high torque for tough cuts
  • Lightweight 3.5kg design reduces user fatigue
  • Soft grip handle ensures comfortable operation
  • Includes vacuum adapter for effective dust extraction
  • Depth and bevel adjustments allow for precise cutting angles
VS

Disadvantages

  • Does not include a laser guide unlike the WX426 model
  • Blade capacity is limited to 55mm depth
  • No anti-vibration accessories included in the box
  • Requires manual alignment without laser assistance
  • Standard blade may need upgrading for specific materials
M: QW-35-FL

Product Specification

Type

Circular saw

Power

1200W

No-load speed

5000 rpm

Blade diameter

6.30 inches

Cutting capacity

2.17 inches (cutting depth at 0 degrees), 1.50 inches (cutting depth at 45 degree tilt)

Bevel range

0-45 degrees

Arbor size

0.63 inch

Features

Softgrip, auxiliary handle, guide fence, dust extraction, bevel function

Weight

7.72 lbs

M: QW-35-FL

Product Description

Worx WX425 Electric Hand Circular Saw Review

The Worx WX425 Electric Hand Circular Saw is a robust and versatile power tool designed for woodworkers who demand precision and reliability. With a powerful 1200W motor spinning at 5000 RPM, this saw effortlessly handles various cutting tasks, from straight crosscuts to angled bevels up to 45 degrees. Its lightweight design of just 3.5kg ensures that users can maneuver the tool with ease, reducing fatigue during extended projects.

One of the standout features of the WX425 is its ergonomic soft grip handle, which provides comfort and control. The machine includes a depth adjustment lever allowing for precise cuts up to 55mm deep, ensuring clean results on thick timber. For those needing parallel cuts, the included guide rail system helps maintain consistent distances from the edge of the workpiece. Safety is paramount, featuring a lower guard that retracts automatically and locks securely when not in use. The inclusion of a vacuum adapter also allows for dust extraction, keeping your workspace cleaner and safer.

While the WX426 model adds a laser guide for enhanced accuracy, the standard WX425 relies on the Beveltrac system for guiding cuts, making it a practical choice for general carpentry. Whether you are building furniture or performing home renovations, this circular saw delivers the performance needed for professional-grade results.

Key Notes

  • Always wear safety gear including eye protection and ear muffs.
  • Ensure the blade is sharp and suitable for the material being cut.
  • Check the lower guard moves freely before every use.
M: QW-35-FL

© Copyright 2026 Manual.ly