Manual.ly Logo

Worx WX339 Manual

0.0 · 0 Ratings

PDF manual · 76 Pages

English

M: QW-35-FL
page

/ 76

Loading...
661e75aa5ec37a4892bb3f3bef7a0001d72f page 8
Rotary hammer EN
8
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing
the job. This may significantly reduce the exposure
level over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high
vibration tool use across a number of days.
ACCESSORIES
WX337 WX339
Auxiliary handle 1 1
Depth gauge 1 1
1#Injection box 1 1
SDS drill bits:8/10/12mm / 3
SDS flat chisel 20x250mm / 1
We recommend that you purchase your accessories
from the same store that sold you the tool.Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for hammer drilling in
concrete, brick and stone as well as for light chiseling
work. It is also suitable for drilling without impact in
wood, metal, ceramic and plastic.
WARNING: Before any work on the
machine itself, pull the mains plug.
OPERATION
Action Figure
INSERTING AND REMOVING
DRILL BIT IN SDS
See Fig.
A1& A2
Adjusting the Auxiliary Handle
See Fig. B
Using the Depth Gauge
See Fig. C
Plugging in the power See Fig. D
On/Off Switch With Variable Speed
Control
See Fig. E
FORWARD / REVERSE ROTATION
CONTROL
WARNING: Never change the
direction of rotation while the
tool is rotating, wait until it has
stopped.
See Fig. F
Selecting The Operating Mode
For simultaneous drilling and impacting
of concrete or masonry, choose the
Hammer drilling position.
For screw driving, drilling into steel,
wood and plastics choose the Rotary
drilling position.
For impacting only - for light chipping,
chiseling and demolition applications
choose the Hammer position.
WARNING: The operating
mode selector switch may be
actuated only at a standstill.
WARNING: Prolonged use
will cause the aluminum
housing to become hot, do not
touch.
See Fig. G
WORKING HINTS FOR YOUR
DRILL(HAMMER)
If your power tool becomes over heated, set the
speed to maximum and run no load for 2-3 minutes
to cool the motor. SDS-plus tungsten carbide drill bits
should always be used for concrete and masonry.
When drilling in metal, only use HSS drill bits in good
condition. Always use a magnetic bit holder when
using short screwdriver bits. Where possible use a
pilot hole before drilling a large diameter hole.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication
or maintenance. There are no user serviceable parts
in your power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean with
a dry cloth. Always store your power tool in a dry
place. Keep the motor ventilation slots clean. Keep all
working controls free of dust.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Heruntergeladen von manualslib.de Handbücher-Suchmachiene

Chat with your Worx WX339 manual using AI

Get instant AI answers from your Worx WX339 manual

Ask anything about the Worx WX339. Answers come from this manual, with the pages they are based on.

WX339 Maintenance Schedule

After each use
Wipe the tool with a dry cloth

Clean the power tool with a dry cloth. Never use water or chemical cleaners to clean the tool.

Regularly
Keep motor ventilation slots clean

Ensure the motor ventilation slots are free of dust and debris to prevent overheating.

Regularly
Keep working controls free of dust

Maintain all working controls in a clean state, free from dust accumulation.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WX339?

Yes No

Frequently Asked Questions

A

The Worx WX339 is designed for hammer drilling in concrete, brick, and stone. It can also perform rotary drilling in wood, metal, ceramic, and plastic without the hammer function.

Is this answer helpful?

A

Yes, the standard delivery includes three SDS-plus drill bits (8mm, 10mm, and 12mm), one flat chisel, an auxiliary handle, and a depth gauge.

Is this answer helpful?

A

You must wait until the tool has completely stopped rotating before changing the direction using the forward and reverse control switch. Never change direction while the tool is running.

Is this answer helpful?

A

Yes, due to high noise and vibration levels, you should wear ear protection, eye protection, a dust mask, and non-skid safety shoes. Gloves are also recommended.

Is this answer helpful?

A

Yes, but you must use an extension cord suitable for outdoor use to reduce the risk of electric shock. Avoid using the tool in wet conditions unless an RCD is used.

Is this answer helpful?

A

If the tool overheats, set the speed to maximum and run it without load for 2-3 minutes to allow the motor to cool down naturally.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High impact energy of 2.5J ensures efficient drilling in concrete and masonry
  • Comes with a complete set of accessories including drill bits and chisel
  • Variable speed control allows for precise handling of different materials
  • Lightweight design at 3.3kg reduces user fatigue during prolonged use
  • Includes a durable carrying case for convenient storage and transport
VS

Disadvantages

  • Aluminum housing can become hot during prolonged operation
  • High noise level of 98.8 dB(A) requires ear protection
  • Vibration levels may cause hand-arm vibration syndrome if not managed
  • No dust extraction port included for cleaner working environments
  • Cord length may be insufficient for very large work areas without extension
M: QW-35-FL

Product Specification

Type

Rotary Hammer Drill

Power

800W

No-load Speed

0-1050 rpm

No-load Impact Rate

0-5300 bpm

Drilling Capacity

Wood 30mm, Steel 13mm, Masonry 26mm

Impact Energy

2.5J

Chuck Type

SDS-plus Quick Lock Chuck

Features

Forward/Reverse, Variable Speed, Variable Impact Rate, Reverse Lock, Impact Lock, Soft Grip, Auxiliary Handle

Weight

7.28 lbs

Package Contents

Case, 4-piece accessory set

M: QW-35-FL

Product Description

The Worx WX339 Electric Drill Hammer: A Versatile Power Tool for Every Job

The Worx WX339 Electric Drill Hammer with Case + Accessories is a robust and reliable power tool designed to tackle demanding construction tasks with ease. Whether you are drilling into thick concrete, masonry, or stone, this machine delivers consistent performance. It features a powerful motor that provides an impact rate of up to 5300 blows per minute, ensuring efficient penetration through hard materials. The inclusion of a carrying case means your tool and its accessories stay organized and protected, making it perfect for both professional contractors and serious DIY enthusiasts.

This versatile drill hammer offers multiple operating modes to suit various applications. You can switch between hammer drilling for masonry, rotary drilling for wood and metal, and chiseling mode for light demolition work. The variable speed control allows for precise operation, while the forward and reverse rotation control ensures flexibility in screw driving and bit removal. Safety is a top priority, with insulated gripping surfaces to protect against hidden wiring and a lock-on button to reduce fatigue during extended use.

The kit comes complete with essential accessories, including SDS-plus drill bits in 8mm, 10mm, and 12mm sizes, a flat chisel, an auxiliary handle, and a depth gauge. These tools enable you to start projects immediately without needing additional purchases. The adjustable depth stop helps maintain consistency when drilling holes to specific depths. With a lightweight design weighing only 3.3 kg, the WX339 reduces user strain, allowing for better control and maneuverability in tight spaces.

Proper maintenance ensures longevity. The tool requires no lubrication and has no user-serviceable parts, simplifying care. Simply wipe it clean with a dry cloth and store it in a dry place. Always disconnect the power source before any adjustments. By following safety guidelines and using the correct accessories, the Worx WX339 becomes an indispensable addition to your workshop, ready to handle everything from home repairs to large-scale building projects.

M: QW-35-FL

© Copyright 2026 Manual.ly