Manual.ly Logo

Worx WX339 Manual

0.0 · 0 Ratings

PDF manual · 76 Pages

English

M: QW-35-FL
page

/ 76

Loading...
661e75aa5ec37a4892bb3f3bef7a0001d72f page 5
Rotary hammer EN
5
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING! Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current
device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
3. PERSONAL SAFETY
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
4. POWER TOOL USE AND CARE
a) Do not force the power tool. Use the
correct power tool for your application. The
correct power tool will do the job better and safer
at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and
Heruntergeladen von manualslib.de Handbücher-Suchmachiene

Chat with your Worx WX339 manual using AI

Get instant AI answers from your Worx WX339 manual

Ask anything about the Worx WX339. Answers come from this manual, with the pages they are based on.

WX339 Maintenance Schedule

After each use
Wipe the tool with a dry cloth

Clean the power tool with a dry cloth. Never use water or chemical cleaners to clean the tool.

Regularly
Keep motor ventilation slots clean

Ensure the motor ventilation slots are free of dust and debris to prevent overheating.

Regularly
Keep working controls free of dust

Maintain all working controls in a clean state, free from dust accumulation.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WX339?

Yes No

Frequently Asked Questions

A

The Worx WX339 is designed for hammer drilling in concrete, brick, and stone. It can also perform rotary drilling in wood, metal, ceramic, and plastic without the hammer function.

Is this answer helpful?

A

Yes, the standard delivery includes three SDS-plus drill bits (8mm, 10mm, and 12mm), one flat chisel, an auxiliary handle, and a depth gauge.

Is this answer helpful?

A

You must wait until the tool has completely stopped rotating before changing the direction using the forward and reverse control switch. Never change direction while the tool is running.

Is this answer helpful?

A

Yes, due to high noise and vibration levels, you should wear ear protection, eye protection, a dust mask, and non-skid safety shoes. Gloves are also recommended.

Is this answer helpful?

A

Yes, but you must use an extension cord suitable for outdoor use to reduce the risk of electric shock. Avoid using the tool in wet conditions unless an RCD is used.

Is this answer helpful?

A

If the tool overheats, set the speed to maximum and run it without load for 2-3 minutes to allow the motor to cool down naturally.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High impact energy of 2.5J ensures efficient drilling in concrete and masonry
  • Comes with a complete set of accessories including drill bits and chisel
  • Variable speed control allows for precise handling of different materials
  • Lightweight design at 3.3kg reduces user fatigue during prolonged use
  • Includes a durable carrying case for convenient storage and transport
VS

Disadvantages

  • Aluminum housing can become hot during prolonged operation
  • High noise level of 98.8 dB(A) requires ear protection
  • Vibration levels may cause hand-arm vibration syndrome if not managed
  • No dust extraction port included for cleaner working environments
  • Cord length may be insufficient for very large work areas without extension
M: QW-35-FL

Product Specification

Type

Rotary Hammer Drill

Power

800W

No-load Speed

0-1050 rpm

No-load Impact Rate

0-5300 bpm

Drilling Capacity

Wood 30mm, Steel 13mm, Masonry 26mm

Impact Energy

2.5J

Chuck Type

SDS-plus Quick Lock Chuck

Features

Forward/Reverse, Variable Speed, Variable Impact Rate, Reverse Lock, Impact Lock, Soft Grip, Auxiliary Handle

Weight

7.28 lbs

Package Contents

Case, 4-piece accessory set

M: QW-35-FL

Product Description

The Worx WX339 Electric Drill Hammer: A Versatile Power Tool for Every Job

The Worx WX339 Electric Drill Hammer with Case + Accessories is a robust and reliable power tool designed to tackle demanding construction tasks with ease. Whether you are drilling into thick concrete, masonry, or stone, this machine delivers consistent performance. It features a powerful motor that provides an impact rate of up to 5300 blows per minute, ensuring efficient penetration through hard materials. The inclusion of a carrying case means your tool and its accessories stay organized and protected, making it perfect for both professional contractors and serious DIY enthusiasts.

This versatile drill hammer offers multiple operating modes to suit various applications. You can switch between hammer drilling for masonry, rotary drilling for wood and metal, and chiseling mode for light demolition work. The variable speed control allows for precise operation, while the forward and reverse rotation control ensures flexibility in screw driving and bit removal. Safety is a top priority, with insulated gripping surfaces to protect against hidden wiring and a lock-on button to reduce fatigue during extended use.

The kit comes complete with essential accessories, including SDS-plus drill bits in 8mm, 10mm, and 12mm sizes, a flat chisel, an auxiliary handle, and a depth gauge. These tools enable you to start projects immediately without needing additional purchases. The adjustable depth stop helps maintain consistency when drilling holes to specific depths. With a lightweight design weighing only 3.3 kg, the WX339 reduces user strain, allowing for better control and maneuverability in tight spaces.

Proper maintenance ensures longevity. The tool requires no lubrication and has no user-serviceable parts, simplifying care. Simply wipe it clean with a dry cloth and store it in a dry place. Always disconnect the power source before any adjustments. By following safety guidelines and using the correct accessories, the Worx WX339 becomes an indispensable addition to your workshop, ready to handle everything from home repairs to large-scale building projects.

M: QW-35-FL

© Copyright 2026 Manual.ly