Manual.ly Logo

Worx WX272.9 Manual

0.0 · 0 Ratings

PDF manual · 112 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 112

Loading...
8a653c33a1c7afa022ecbd043700080d32f4 page 7
7
20V Brushless Impact Wrench
EN
PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1 WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you
to lose control.
2 ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock
.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts.
Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of
a cord suitable for outdoor use reduces the risk of
electric shock
.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
Use of an RCD reduces the risk of
electric shock.
3 PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A
moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection.
Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking up
or carrying the tool.
Carrying power tools with your
finger on the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on
. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewelery. Keep your hair and clothing away from
moving parts.
Loose clothes, jewelery or long hair
can be caught in moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of
dust collection can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles.
A careless action can
cause severe injury within a fraction of a second.
4 POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct
power tool for your application.
The correct power
tool will do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Power tools are dangerous
in the hands of untrained users.
e) Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control
.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking
into account the working conditions and the
work to be performed.
Use of the power tool for

Chat with your Worx WX272.9 manual using AI

Get instant AI answers from your Worx WX272.9 manual

Ask anything about the Worx WX272.9. Answers come from this manual, with the pages they are based on.

WX272.9 Maintenance Schedule

Before use
Check battery condition

Verify the battery pack is charged and in good condition before using the tool.

Show in the manual (page 11)
As needed
Clean ventilation slots

Keep motor ventilation slots clean and free of dust to prevent overheating.

Show in the manual (page 12)
As needed
Wipe tool with dry cloth

Clean the tool body with a dry cloth. Never use water or chemical cleaners.

Show in the manual (page 12)
After long storage
Recondition battery pack

If stored for extended periods, charge and discharge the battery several times to restore maximum performance.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WX272.9?

Yes No

Frequently Asked Questions

A

No, use batteries specifically designated for this equipment. Using other battery packs may create a risk of injury and fire. Recharge only with chargers specified by Worx to maintain safety standards.

Is this answer helpful?

A

The tool delivers a max torque of 300 Nm. This allows for effective tightening and loosening of various threaded fasteners safely and efficiently during operation.

Is this answer helpful?

A

No, this is the tool only version. It does not include a battery pack or charger. You need to purchase them separately or own compatible ones already.

Is this answer helpful?

A

Set the direction of rotation selector in the OFF position to lock the switch trigger. Ensure the switch is off before connecting to a power source or battery pack.

Is this answer helpful?

A

No. This tool is intended for fastening and loosening bolts, nuts, and threaded fasteners and is not intended for use as a drill or boring.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Brushless motor ensures longer life and higher efficiency for demanding tasks.
  • Compatible with Worx PowerShare 20V battery system for tool versatility.
  • Max torque of 300 Nm provides power for heavy-duty fastening safely.
VS

Disadvantages

  • Does not include battery or charger, sold as tool only for purchase.
  • Vibrations might be present during high torque operations requiring care.
  • Socket size is fixed at 1/2 inch which may limit access in tight spaces.
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Impact Wrench

Battery

20V, Li-Ion

No-load speed

0-1,300/0-2,200/0-2,900 RPM

No-load impact rate

0-2,000/0-3,200/0-4,000 /min

Torque

max. 221.27 ft-lb

Tool retention

1/2" Square Drive

Features

Forward/Reverse, Variable Speed, Variable Impact, Multi-gear, LED Work Light, Soft Grip, Brushless Motor, Belt Clip

Weight

2.43 lbs (without battery)

Package contents

Without charger and battery

M: qwen/qwen3.5-flash-20260224

Product Description

Mastering Repairs with Worx WX272.9

The Worx WX272.9 Nitro 20V PowerShare Cordless Impact Wrench is a powerhouse tool for professionals and DIY enthusiasts alike. Designed for high performance without the constraints of a cord, this brushless motor ensures efficiency and longevity. Operating at a maximum voltage of 20V, it delivers a torque of up to 300 Nm, making it suitable for tough bolts and nuts. The variable speed control allows precise operation ranging from 0 to 1300 RPM, up to 2900 RPM, depending on the setting. This flexibility is essential for delicate tasks or heavy-duty loosening.

Using the manual is crucial to understanding the safety and operational nuances. The tool features a forward and reverse rotation switch with a central lock to prevent accidental starting. Safety warnings emphasize keeping the work area clean and wearing protective equipment like eye protection. Users must read the instruction manual carefully before assembly. The LED light aids visibility in dimly lit areas, automatically turning off after 20 seconds. Battery protection systems prevent overheating or overload, cutting power if necessary. Always store the tool in a dry place. Ensure the battery is removed during maintenance. The manual provides troubleshooting steps, such as ensuring the battery fits correctly in the charger.

This impact wrench is part of the PowerShare system, meaning batteries can be interchanged with other 20V Worx tools. It weighs only 1.1 kg, offering portability. The 1/2 inch chuck accepts standard impact sockets. Noise levels are manageable at 85 dB(A). Vibration values are calculated according to standard EN 62841, so users should manage exposure.

For those considering this tool, adhering to the guidelines in the instruction manual is vital for safety. The manual details specific safety warnings regarding electrical shock and battery care. It is recommended to purchase accessories from the same provider. Proper handling extends the life of both the tool and the battery. Regular checks on accessories and the battery are advised. Do not expose the tool to rain. Keep handles dry. Always use the correct battery pack. When charging, stay within the 0 to 40 degree Celsius range. This ensures optimal performance and safety during your projects.

The PowerShare system includes various battery models like the WA3553 which offers 4.0Ah capacity. This allows for extended running time during demanding applications. It is essential to recharge only with the charger specified by the manufacturer. This ensures optimal performance and safety while using the tool. Whether you are a mechanic or a home repairer, understanding the manual provides the best performance for your mechanical tasks.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly