Manual.ly Logo

Worx WX261.9 Manual

0.0 · 0 Ratings

PDF manual · 128 Pages

English

M: OA-GPT-5-NAN
page

/ 128

Loading...
54f460346d3d5a3fb40e52c772826920c03a page c
12
20V Brushless Impact Driver
EN
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Vibration emission value:
a
h
= 7.446m/s
2
Uncertainty K = 1.5m/s
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways
in which the tool is used especially what kind of
workpiece is processed dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration and noise exposure
risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
4.INTENDED USE
This tool is intended for the fastening and loosening of
bolts, nuts and various threaded fasteners. This tool is
not intended for use as a drill.
5.OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
ASSEMBLY AND OPERATION
ACTION FIGURE
BEFORE OPERATION
Checking the Battery Pack Condition See Fig .A1
Removing the Battery Pack See Fig. A2
Charging the Battery Pack See Fig. A3
Installing the Battery Pack See Fig. A4
ASSEMBLY AND ADJUSTMENT
Assembling the Hook and Bit Clip
See Fig. B1,
B2, B3, B4
Inserting the Bits See Fig. C1
Removing the Bits See Fig. C2
Forward / Reverse / Lock
WARNING Never change the
direction of rotation when
the chuck is rotating, wait until it
is stopped!
See Fig. D1,
D2, D3
OPERATION
Operating the On/Off Switch
WARNING Do not operate for
long periods at low speed
because excess heat will be
produced internally.
Variable 3-Speed
Press the red button to select
preferred rotation speed, levels 1 to 3,
with 3 being the fastest. The operating
speed will be illuminated.
See Fig. E

Chat with your Worx WX261.9 manual using AI

Get instant AI answers from your Worx WX261.9 manual

Ask anything about the Worx WX261.9. Answers come from this manual, with the pages they are based on.

WX261.9 Maintenance Schedule

Before use
Remove battery before maintenance

Always remove the battery pack from the tool before performing any adjustment, servicing or maintenance tasks.

Show in the manual (page 12)
As needed
Clean with dry cloth

Never use water or chemical cleaners. Wipe clean with a dry cloth to remove dust and debris.

Show in the manual (page 12)
As needed
Keep ventilation slots clean

Ensure motor ventilation slots are kept free of dust to prevent overheating and ensure proper operation.

Show in the manual (page 12)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend WX261.9?

Yes No

Frequently Asked Questions

A

The WX261.9 Nitro delivers up to 260 Nm of maximum torque, making it suitable for heavy fastening and loosening tasks when paired with an appropriate Worx 20V battery.

Is this answer helpful?

A

Yes — it uses a brushless motor, which provides greater efficiency, longer motor life, less maintenance, and often improved runtime compared with brushed motors.

Is this answer helpful?

A

The tool has overload, overheat and low-battery protection systems that flash the LED and cut power to protect the motor and battery. It also features a forward/reverse lock, ventilation slots, and safety guidance for battery handling and disposal.

Is this answer helpful?

A

The WX261.9 is part of Worx 20V PowerShare; compatible battery models range from 1.5 Ah to 6.0 Ah (e.g., WA3550–WA3641) and chargers from 0.4A to 4.0A. Use only Worx-specified batteries and chargers for safety and warranty compliance.

Is this answer helpful?

A

The tool offers three variable speed ranges: approx. 0–900, 0–2400 and 0–3000 rpm, with corresponding impact rates up to ~4000 bpm on the highest setting. A red button selects the speed level and illuminates the active setting.

Is this answer helpful?

A

Remove the battery before maintenance, keep ventilation slots clean, wipe with a dry cloth (no water or chemical cleaners), store in a dry place, and follow proper charging cycles. Brushless design minimizes routine maintenance.

Is this answer helpful?

A

A quickly flashing LED indicates the protection system triggered (overload, overheating or low battery), which cuts power to protect components. Release the trigger, address the cause (cool down, reduce load, recharge) and resume when safe.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Brushless motor for better efficiency, reduced maintenance and longer life.
  • High max torque (260 Nm) suitable for heavy fastening tasks.
  • Three-speed variable control for precision and task flexibility.
  • Lightweight bare tool (1.1 kg) with soft-grip handle and hanging hook for comfort and portability.
  • Integrated protections (overload, overheat, low battery) and LED work light for safe operation.
VS

Disadvantages

  • Declared vibration level (ah ≈ 7.446 m/s²) may require anti-vibration measures for prolonged use.
  • Noise level (LpA ≈ 83.6 dB(A)) necessitates hearing protection during operation.
  • Tool is not intended or optimized for drilling — limited to fastening applications.
  • Battery and charger must be Worx-specified; third-party chargers not supported.
  • Bare tool sold solo — batteries and charger are additional purchases for full use.
M: OA-GPT-5-NAN

Product Specification

Type

Impact Wrench

Battery

20V, Li-ion

No-load Speed

0-900/0-2400/0-3000/min

No-load Impact Rate

0-1200/0-3300/0-4000/min

Torque

max. 191.76 ft-lb

Tool Holder

1/4" Bit Holder

Features

Forward/Reverse Rotation, Speed Control, Impact Rate Control, Multi-speed, LED Work Light, Softgrip, Brushless Motor, Belt Clip

Weight

2.43 lb (without battery)

Scope of Delivery

without charger and battery

M: OA-GPT-54-NAN

Product Description

Worx WX261.9 Nitro 20V PowerShare Cordless Impact Wrench solo Manual

The Worx WX261.9 Nitro 20V PowerShare Cordless Impact Wrench is a compact, brushless cordless impact driver built for fastening and loosening bolts, nuts and a variety of threaded fasteners. Powered by the 20V PowerShare system (nominally 18V, measured up to 20V), this lightweight 1.1 kg bare tool delivers up to 260 Nm of maximum torque and three variable speed ranges to match tasks from light screwdriving to heavy-duty fastening.

Equipped with a brushless motor for improved efficiency and longer life, the WX261.9 offers step-selectable no-load speeds (approx. 0–900, 0–2400, 0–3000 rpm) and corresponding impact rates for precise control. A variable 3-speed selector and a soft-grip handle let users dial in performance for different materials and fasteners. The tool accepts 6.35 mm (1/4") bits and includes features such as an LED work light, forward/reverse control with lock, a bit clip and hook for convenience, and a battery capacity indicator when paired with compatible Worx batteries.

Safety and durability are central: the wrench includes multiple protection systems that cut power under overload, overheating, or low battery conditions. Acoustic and vibration emissions are specified (LpA ≈ 83.6 dB(A); declared vibration ah ≈ 7.446 m/s²), so hearing protection and anti-vibration practices are advised for extended use. The manual stresses routine checks, correct battery charging (use only Worx chargers), safe battery handling, and proper disposal/recycling of batteries and electrical waste.

Maintenance is minimal — the brushless design reduces upkeep — but users should keep ventilation slots clean, avoid water or chemical cleaners, and remove the battery before any servicing. The tool is intended for fastening tasks only, not as a drill. A clear troubleshooting section covers common issues like charging orientation, reduced runtime, and protective shutdown behaviors.

Notes:

  • Compatible batteries and chargers are listed for capacity choices (1.5Ah–6.0Ah) and chargers (0.4A–4.0A). Use only specified Worx chargers and batteries.
  • The tool features thermal and overload protection that will flash the LED and cut power if limits are exceeded; allow cooling before restarting.
  • Observe recommended temperature ranges for operation and charging (use/storage: 0°C–45°C; charging: 0°C–40°C).
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly