Manual.ly Logo

Worx WX183 Manual

0.0 · 0 Ratings

PDF manual · 120 Pages

English

M: QW-35-FL
page

/ 120

Loading...
fcab346f8e880c02fd3937ecb9be76cf1bf6 page 9
Lithium-Ion Cordless Drill Driver EN
98
DRILL SAFETY WARNINGS
1. Wear ear protectors when impact
drilling. Exposure to noise can cause
hearing loss.
2. Use auxiliary handles, If supplied
with the tool. Loss of control can cause
personal injury.
3. Hold power tool by insulated
gripping surfaces, when performing
an operation where the cutting
accessory may contact hidden
wiring. Cutting accessory contacting a
“live” wire may make exposed metal parts
of the power tool “live” and could give the
operator an electric shock.
SCREW DRIVER AND
IMPACT WRENCH SAFETY
WARNING
1. Hold power tool by insulated gripping
surfaces, when performing an
operation where the fastener may
contact hidden wiring. Fasteners
contacting a “live” wire may make
exposed metal parts of the power tool
“live” and could give the operator an
electric shock.
SAFETY WARNINGS FOR
BATTERY PACK
a) Do not dismantle, open or shred cells
or battery pack.
b) Do not short-circuit a battery pack. Do
not store battery packs haphazardly
in a box or drawer where they may
short-circuit each other or be
short-circuited by conductive
materials. When battery pack is not
in use, keep it away from other metal
objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that
can make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fire.
c) Do not expose battery pack to heat or
fire. Avoid storage in direct sunlight.
d) Do not subject battery pack to
mechanical shock.
e) In the event of battery leaking, do not
allow the liquid to come into contact
with the skin or eyes. If contact has
been made, wash the affected area
with copious amounts of water and
seek medical advice.
f) Seek medical advice immediately
if a cell or battery pack has been
swallowed.
g) Keep battery pack clean and dry.
h) Wipe the battery pack terminals with
a clean dry cloth if they become dirty.
i)
Battery pack needs to be charged
before use. Always refer to this
instruction and use the correct charging
procedure.
j) Do not maintain battery pack on
charge when not in use.
k)
After extended periods of storage,
it may be necessary to charge
and discharge the battery pack
several times to obtain maximum
performance.
l)
Battery pack gives its best
performance when it is operated at
normal room temperature (20°C ± 5°C).
m) When disposing of battery packs,
keep battery packs of different
electrochemical systems separate
from each other.
n) Recharge only with the charger
specified by WORX. Do not use any
charger other than that specifically
provided for use with the equipment.
A charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack.
o) Do not use any battery pack which
is not designed for use with the
equipment.
p) Keep battery pack out of the reach of
children.
q) Retain the original product literature
for future reference.
r) Remove the battery from the
equipment when not in use.
s) Dispose of properly.

Chat with your Worx WX183 manual using AI

Get instant AI answers from your Worx WX183 manual

Ask anything about the Worx WX183. Answers come from this manual, with the pages they are based on.

WX183 Maintenance Schedule

After each use
Remove battery pack from tool

Remove the battery pack from the equipment when not in use to ensure safety and proper storage.

When dirty
Wipe battery terminals with dry cloth

If battery pack terminals become dirty, wipe them clean with a clean dry cloth.

Regularly
Keep motor ventilation slots clean

Ensure motor ventilation slots are free of dust and debris to prevent overheating.

Show in the manual (page 12)
Regularly
Keep working controls free of dust

Maintain all operating controls clear of dust to ensure proper functionality.

Show in the manual (page 12)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WX183?

Yes No

Frequently Asked Questions

A

Check if the forward/reverse rotation control lever is locked in the center position. Unlock it by moving it fully to the left or right side, then press the trigger again to start the drill.

Is this answer helpful?

A

The built-in LED light will flash rapidly when the battery capacity is low. This indicates that the battery needs to be removed and recharged immediately to avoid stopping mid-task.

Is this answer helpful?

A

Yes, the Worx WX183 is designed for impact drilling in wood and metal. For masonry or concrete, ensure you are using the correct hammer drill setting and appropriate masonry bits.

Is this answer helpful?

A

If the tool stops because it has overheated, release the trigger and allow the drill and battery to cool down completely before attempting to restart. Avoid using the tool at low speeds for long periods to prevent heat buildup.

Is this answer helpful?

A

Ensure the drill is turned off and the trigger is locked. Insert the bit fully into the chuck and tighten the chuck key or hand-tighten until secure. Never operate the tool with a loose bit.

Is this answer helpful?

A

Yes, the battery pack is easily removable via the release button. You can take it out of the tool and place it directly into the charger for convenient recharging anywhere.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Two-speed gearbox offers versatility for drilling and screwdriving tasks
  • LED work light improves visibility in dim environments
  • Compatible with Worx Powershare battery system for multi-tool usage
  • 18+1 torque settings provide precise control for various materials
  • Soft grip handle reduces hand fatigue during prolonged use
VS

Disadvantages

  • Maximum drilling depth in metal is limited to 13mm
  • Battery life decreases significantly under heavy load conditions
  • No auxiliary handle included for added stability on large jobs
  • Tool may stop if overheated, requiring cool-down time
  • Charging time can be lengthy depending on battery depletion level
M: QW-35-FL

Product Specification

Type

Screwdriver

No-load speed

0-500/0-1700 rpm

Drilling capacity

Wood 35mm, Steel 13mm

Torque

44.25 lb-ft, 19 levels (18+1)

Chuck type

Keyless chuck

Features

Forward/reverse, Variable speed, 2-speed gear, Torque setting, LED work light, Soft grip

Weight

3.66 lbs

M: QW-35-FL

Product Description

Worx WX183 Powershare Cordless Drill: Power Meets Precision

The Worx WX183 Powershare Cordless Drill stands as a versatile powerhouse for both DIY enthusiasts and professional contractors. Designed with a robust lithium-ion battery system, this tool delivers consistent performance across a wide range of tasks, from drilling into tough steel to driving screws into hardwood. The drill features a powerful motor capable of reaching speeds up to 1700 RPM in high gear, ensuring efficiency when tackling demanding projects.

One of the standout features of the WX183 is its two-speed gearbox, allowing users to switch between low speed for high torque applications and high speed for faster drilling. The adjustable torque ring offers 18 settings plus a drill mode, providing precise control to prevent over-tightening or damaging materials. Safety is paramount, with an LED work light illuminating dark workspaces and a soft-grip handle reducing user fatigue during extended use.

The drill includes intelligent protection systems that monitor battery health and tool temperature. If the drill becomes overloaded or overheated, it automatically shuts down to protect the internal components and extend the lifespan of the battery. The LED indicator also serves as a battery capacity gauge, flashing when power runs low so you can recharge before stopping mid-job.

This cordless drill is part of the Worx Powershare ecosystem, meaning its battery is compatible with other tools in the series, offering great value and flexibility. Whether you are assembling furniture, building a deck, or performing household repairs, the Worx WX183 provides the reliability and power needed to get the job done right.

Important Notes

  • Always remove the battery before changing bits or performing maintenance.
  • Do not charge the battery at temperatures below 0°C or above 30°C.
  • Use only the charger specified by Worx to ensure safety and performance.
M: QW-35-FL

© Copyright 2026 Manual.ly