Manual.ly Logo

Worx WX101 Manual

0.0 · 0 Ratings

PDF manual · 124 Pages

English

M: OA-GPT-54-NAN
page

/ 124

Loading...
d67de485e031872ef69368478f385b81b839 page b
11
20V Cordless Drill Driver EN
PROBLEM SOLUTION
1. WHY DOES THE DRILL NOT TURN ON WHEN YOU
PRESS THE SWITCH?
The forward/reverse rotation control, which is on top of
the trigger, is positioned in the lock function. Unlock the
forward/reverse rotation control by putting it into the
required rotation position. Push the trigger and the drill
will start to rotate.Check that the battery is charged and
properly connected to the tool.
2. THE DRILL STOPS BEFORE THE SCREW IS
COMPLETELY TIGHTENED. WHY?
Verify the torque position of the torque adjusting ring.
Find the torque adjusting ring between the chuck and the
drill body. Position 1 is the lowest torque (screw driving
force) and position 15 is the highest torque (screw driving
force). Position
is for drill operation. Regulate the torque
adjusting ring to a higher position to reach the best result.
3. REASONS FOR DIFFERENT BATTERY PACK
WORKING TIMES
Charging time problems, as above, and having not used a
battery pack for a prolonged time will reduce the battery
pack working time. This can be corrected after several
charge and discharge operations by charging & working
with your drill. Heavy working conditions such as large
screws into hard wood will use up the battery pack energy
faster than lighter working conditions. Do not re-charge
your battery pack below 0
o
C and above 45
o
C as this will
affect performance.
MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Your tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage your
power tool.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0
0
C-45
0
C.
The recommended ambient temperature range for the
charging system during charging is 0
0
C-40
0
C.
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
DECLARATION OF CONFORMITY
We,
Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
Declare that the product
Description Cordless Drill Driver
Type WX101 WX101.X (1-designation of machinery,
representative of Cordless Drill)
Function Drilling, tightening and loosening
screws, nuts
Complies with the following Directives:
2006/42/EC
2011/65/EU&(EU)2015/863
2014/30/EU
Standards conform to
EN 55014-1, EN 55014-2, EN 62841-1, EN 62841-2-1
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
2021/03/20
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China

Chat with your Worx WX101 manual using AI

Get instant AI answers from your Worx WX101 manual

Ask anything about the Worx WX101. Answers come from this manual, with the pages they are based on.

WX101 Maintenance Schedule

As needed
Clean the motor ventilation slots

Keep the motor ventilation slots clean and free of dust to ensure proper operation.

Show in the manual (page 11)
As needed
Clean all working controls

Keep all working controls free of dust and debris.

Show in the manual (page 11)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend WX101?

Yes No

Frequently Asked Questions

A

It is designed for driving and loosening screws, plus drilling in wood, metal, and plastic. It is a practical cordless option for home repairs, furniture assembly, and general DIY work.

Is this answer helpful?

A

It offers up to 30 N.m of max torque and two speed ranges up to 1450 rpm. That gives you a good balance of control for screws and speed for drilling lighter materials.

Is this answer helpful?

A

Yes. The 10 mm keyless chuck lets you swap bits quickly without extra tools. That is especially helpful when moving between drilling and screwdriving tasks.

Is this answer helpful?

A

The 15 torque settings help you adjust driving force for different screws and materials, while the extra drill mode is used for drilling without clutch limitation.

Is this answer helpful?

A

It is designed with a soft grip handle and a compact body, which improves comfort and control. Its light bare-tool weight also helps reduce fatigue during short and medium jobs.

Is this answer helpful?

A

The built-in protection system can cut power if the tool is overloaded, overheated, or the battery voltage gets too low. This helps protect the tool and extend battery life.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Compact 0.9 kg design makes handling easier for everyday DIY tasks.
  • Two-speed gearbox supports both controlled screwdriving and faster drilling.
  • 15+1 clutch settings help fine-tune torque for different materials and fasteners.
  • LED light improves visibility in darker work areas and tight spots.
VS

Disadvantages

  • 10 mm chuck and 30 N.m torque limit it to light and medium-duty jobs.
  • Bare-tool weight excludes battery, so total weight will be higher in real use.
  • Not intended for masonry or heavy industrial drilling tasks.
M: OA-GPT-54-NAN

Product Specification

Type

Drill Driver

No-load speed

0-400/0-1450/min

Drilling capacity

Wood 1.00 in, Steel 0.39 in

Torque

22.13 lb-ft, 15 stages (15+1)

Chuck type

0.39 in keyless chuck

Features

Forward/reverse, Speed control, Multiple gears, Torque preselection, LED work light, Soft grip

M: OA-GPT-54-NAN

Product Description

Worx WX101 20V PowerShare Cordless Drill Driver

The Worx WX101 20V PowerShare Cordless Drill Driver is built for everyday tasks that call for control, convenience, and dependable power. Designed for drilling and screwdriving in wood, metal, and plastic, it brings a practical mix of compact size and capable performance to home projects, repairs, and light workshop use.

At the heart of this tool is a 20V Max battery platform paired with two-speed gearing, delivering up to 1450 rpm for faster drilling and a lower range for more precise screw driving. The 15+1 clutch settings help you match torque to the task, while the 30 N.m max torque gives extra confidence when working with tougher fasteners. A 10 mm keyless chuck makes bit changes quick and simple, and the forward/reverse control keeps switching between driving and removing screws straightforward.

The WX101 also focuses on comfort and usability. Its soft grip handle improves handling during longer jobs, and the built-in LED light is useful when working in dim corners, cabinets, or tight spaces. Weighing just 0.9 kg as a bare tool, it feels easy to manage overhead or one-handed in short bursts, making it a good fit for users who want a drill that stays maneuverable without feeling underpowered.

One of the most useful aspects of this model is its battery protection system. The tool is designed to cut power in overload, overheating, or low-voltage situations, helping protect the battery and extend service life. That makes it a thoughtful choice for users who value both performance and durability. It also fits into the broader Worx PowerShare family, which is a plus for anyone already using compatible batteries and chargers.

Why it stands out

The Worx WX101 feels like a balanced cordless drill driver rather than a heavy-duty specialist. It is best suited to common household drilling and fastening, where ease of use, decent torque, and portability matter most. The combination of a compact body, simple controls, and practical safety features makes it approachable for beginners, while still useful for experienced DIY users.

Notes

  • Best for wood, metal, plastic, and general screwdriving
  • Use the correct torque setting for cleaner results
  • Let the chuck stop fully before changing speed or direction
  • Keep the battery charged and dry for longer life
  • Ear and eye protection are recommended during use
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly