Manual.ly Logo

Worx WG261E Manual

0.0 · 0 Ratings

PDF manual · 92 Pages

English

M: OA-GPT-54-NAN
page

/ 92

Loading...
52de3455a56c53212924af854427629f1ba1 page a
Cordless Hedge Trimmer EN
10
ACCESSORY
WG261E WG261E.1 WG261E.9
Blade sheath
1 1 1
Safety guard
1 1 1
Charger
1 (WA3880) 1 (WA3760) /
Battery pack
1 (WA3551) 2 (WA3550.1) /
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
Intended use
The machine is intended for cutting and trimming
hedges and bushes in domestic use.
WARNING! Do not use the product
without attaching the guard and front
handle.
ASSEMBLY & OPERATION
ACTION FIGURE
ASSEMBLY
Assembling the safe guard See Fig. A
Assembling the Front Handle
NOTE: Loosen the long screw first
before assembling the front handle.
NOTE: If the handle is assembled
incorrectly, the tool will not power on.
See Fig.
B1, B2, B3
Checking the battery charge
condition(Only for WG261E)
See Fig. C
Installing and Removing the battery pack
See Fig. D
Charging the battery pack
Your battery pack is UNCHARGED, you
must charge before use.
More details can be found in WA3760/
WA3880 manual
OPERATION
Starting and stopping
See Fig.
E1, E2
Top cutting
WARNING: If any parts are
missing, damaged or broken, do
not operate your hedge trimmer until
all damaged parts have been replaced
or repaired. Failure to do so could result
in serious personal injury. DO NOT
USE WITHOUT FRONT HANDLE AND
SAFETY GUARD.
See Fig. F1
Side cutting
See Fig. F2
Lubricating the Cutting Blade
NOTE: It is important to use only the
recommended standard lubricating oil
(WD-40) to avoid damage to the blade.
See Fig. G
HOW TO USE YOUR HEDGE
TRIMMER
Note that the front switch lever can be activated
on three sides, giving you many choices for a
comfortable grip. Before cutting an area, inspect
it first and remove any foreign objects that could
become thrown or entangled in the blades. Always
hold the trimmer with both hands and with the
blade away from you before turning it on.
When trimming new growth, use a wide sweeping
action so that the stems are fed directly into the
blade. (See Fig. F1&F2)
Allow the cutting blades to reach full speed before
cutting. When operating, keep the cutting blades
away from people and objects such as walls, large
stones, trees, vehicles, etc.
If the blade stalls, immediately stop the trimmer.
Release the two Switch components (6&7) before
attempting to clear jammed debris from the cutting
blades.
Wear gloves when trimming thorny or prickly
growth.
Do not attempt to cut stems that are too thick for
the cutting blade.
TOP CUTTING
Use a wide sweeping motion (See Fig. F1). A slight
downward tilt of the cutting blades in the direction
of motion gives the best cutting results.
SIDE CUTTING
When trimming the sides of the hedge, begin at the
bottom and cut upwards (See Fig. F2), tapering the
hedge inward at the top. This shape will expose
more of the hedge, resulting in a more uniformed
growth.

Chat with your Worx WG261E manual using AI

Get instant AI answers from your Worx WG261E manual

Ask anything about the Worx WG261E. Answers come from this manual, with the pages they are based on.

WG261E Maintenance Schedule

Before each use
Inspect for foreign objects

Check the hedge for foreign objects like wire fences before cutting.

Show in the manual (page 10)
After each use
Clean with dry cloth

Wipe the tool clean with a dry cloth. Never use water or chemical cleaners.

Show in the manual (page 11)
As needed
Lubricate cutting blade

Use only recommended standard lubricating oil (WD-40) to avoid damage to the blade.

Show in the manual (page 10)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend WG261E?

Yes No

Frequently Asked Questions

A

It is intended for cutting and trimming hedges and bushes in domestic use, such as backyard hedges and garden shrubs. Follow the guidance to inspect the hedge first and avoid foreign objects that could damage the blades or cause jams.

Is this answer helpful?

A

Yes. The manual stresses attaching the safety guard and the front handle before operation. If the handle is assembled incorrectly, the tool may not power on. Always fit the cutting blade cover (blade sheath) for transport and storage.

Is this answer helpful?

A

Use wide sweeping motions with the cutting blades allowed to reach full speed before you start. A slight downward tilt in the direction of travel is recommended to improve cut quality. Trim gradually and keep the blade away from people and obstacles.

Is this answer helpful?

A

Stop the trimmer immediately. Release the two switch components before trying to clear jammed debris from the cutting blades. The guidance also recommends inspecting and removing foreign objects from the hedge before continuing.

Is this answer helpful?

A

Use only the recommended standard lubricating oil (WD-40) to avoid damaging the blade. For maintenance, remove the battery first, wipe the tool with a dry cloth, keep ventilation slots clean, and keep controls free of dust. Do not use water or chemical cleaners.

Is this answer helpful?

A

The safety information highlights wearing eye protection and ear protection, and using protective gloves for thorny growth. Because noise and vibration can be significant, protect yourself and consider spreading heavier use across multiple days.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Cordless 20V Max lithium power for home hedge trimming without cords
  • 44 cm cutting length and up to 2200/min no-load speed for efficient shaping
  • Multi-position front switch lever for flexible, comfortable control
  • Safety guard, blade sheath, and guidance to use both hands
  • Simple maintenance routine: dry wipe, keep vents clear, lubricate blade with WD-40
VS

Disadvantages

  • Not designed for cutting stems that are too thick for the blade
  • Requires the safety guard and front handle installed for operation
  • Blade stalls require immediate stop and switch release before clearing debris
  • Vibration and noise levels mean you should plan sessions and wear protection
  • Battery must be charged before first use and only charged with the specified charger
M: OA-GPT-54-NAN

Product Specification

Type

Hedge trimmer

Features

Additional handle

M: GO-GEM-FL-25

Product Description

Worx WG261E 20V PowerShare cordless hedge trimmer: nimble trimming for home hedges

Overview

The Worx WG261E 20V PowerShare cordless hedge trimmer is built for everyday hedge and bush shaping around the home. Powered by a 20V Max lithium system, it gives you cordless freedom while still delivering steady cutting for neat, healthy-looking plants.

If you want reliable results, the included safety and operating guidance, as referenced in the "Worx WG261E 20V PowerShare cordless hedge trimmer Manual", emphasizes basic setup checks, proper guard and handle installation, and safe working habits before you start cutting.

Design and performance

The trimmer uses a 44 cm cutting length with a 16 mm cutting diameter, and it runs at up to 2200 cuts per minute. A key comfort feature is the rear handle plus an all-around front switch lever for easier gripping during both top and side cuts.

Weight is designed for manageable handling: about 2.4 kg for WG261E models and around 2.0 kg for WG261E.1. For sound and comfort planning, it lists a weighted sound pressure of 69.6 dB(A) (with ear protection recommended) and vibration emission of 2.2 m/s2, so good control and proper technique matter.

Safer trimming habits

Before operation, always inspect the hedge for foreign objects such as wire fencing, and keep the blade away from people, walls, stones, vehicles, and other hazards. For safety, the manual guidance stresses using both hands, keeping the switch off when clearing jams, and wearing eye and hearing protection.

Because cutter blades can contact hidden wiring, the tool must be held by insulated gripping surfaces during cutting tasks. If the blade stalls, stop immediately and release the switches before attempting to clear debris.

Top results

  • Cordless 20V Max power for trimming without dragging extension cords around the garden
  • 44 cm cutting length with up to 2200/min no-load speed for efficient hedge shaping
  • Ergonomic control with two-hand operation and multi-position front switch lever for comfort
  • Practical maintenance approach: wipe clean, keep vents clear, and lubricate with WD-40
  • Safety-first workflow: guard and front handle required, plus jam-clearing with switch released

Notes

  • Charge the battery before first use and follow the specified charger procedures.
  • Do not operate without the safety guard and front handle installed.
  • Store dry and use the blade sheath for transport.

Pros

  • Cordless 20V Max design for flexible home hedge work
  • Long 44 cm cutting length for faster shaping
  • Comfortable grip options with the multi-position front switch lever
  • Includes safety guard and recommends protective gear
  • Clear operating guidance for top and side cutting styles

Cons

  • Only intended for domestic hedge and bush trimming, not heavy-duty cutting
  • Stopping and switching off is required before clearing jams
  • Requires correct assembly (front handle and guard) or it will not power on
  • Noise and vibration ratings suggest using hearing protection and good technique
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly