Manual.ly Logo

Worx WG261E Manual

0.0 · 0 Ratings

PDF manual · 92 Pages

English

M: OA-GPT-54-NAN
page

/ 92

Loading...
52de3455a56c53212924af854427629f1ba1 page 6
Cordless Hedge Trimmer EN
6
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current
device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
4. Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application. The
correct power tool will do the job better and safer
at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these

Chat with your Worx WG261E manual using AI

Get instant AI answers from your Worx WG261E manual

Ask anything about the Worx WG261E. Answers come from this manual, with the pages they are based on.

WG261E Maintenance Schedule

Before each use
Inspect for foreign objects

Check the hedge for foreign objects like wire fences before cutting.

Show in the manual (page 10)
After each use
Clean with dry cloth

Wipe the tool clean with a dry cloth. Never use water or chemical cleaners.

Show in the manual (page 11)
As needed
Lubricate cutting blade

Use only recommended standard lubricating oil (WD-40) to avoid damage to the blade.

Show in the manual (page 10)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend WG261E?

Yes No

Frequently Asked Questions

A

It is intended for cutting and trimming hedges and bushes in domestic use, such as backyard hedges and garden shrubs. Follow the guidance to inspect the hedge first and avoid foreign objects that could damage the blades or cause jams.

Is this answer helpful?

A

Yes. The manual stresses attaching the safety guard and the front handle before operation. If the handle is assembled incorrectly, the tool may not power on. Always fit the cutting blade cover (blade sheath) for transport and storage.

Is this answer helpful?

A

Use wide sweeping motions with the cutting blades allowed to reach full speed before you start. A slight downward tilt in the direction of travel is recommended to improve cut quality. Trim gradually and keep the blade away from people and obstacles.

Is this answer helpful?

A

Stop the trimmer immediately. Release the two switch components before trying to clear jammed debris from the cutting blades. The guidance also recommends inspecting and removing foreign objects from the hedge before continuing.

Is this answer helpful?

A

Use only the recommended standard lubricating oil (WD-40) to avoid damaging the blade. For maintenance, remove the battery first, wipe the tool with a dry cloth, keep ventilation slots clean, and keep controls free of dust. Do not use water or chemical cleaners.

Is this answer helpful?

A

The safety information highlights wearing eye protection and ear protection, and using protective gloves for thorny growth. Because noise and vibration can be significant, protect yourself and consider spreading heavier use across multiple days.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Cordless 20V Max lithium power for home hedge trimming without cords
  • 44 cm cutting length and up to 2200/min no-load speed for efficient shaping
  • Multi-position front switch lever for flexible, comfortable control
  • Safety guard, blade sheath, and guidance to use both hands
  • Simple maintenance routine: dry wipe, keep vents clear, lubricate blade with WD-40
VS

Disadvantages

  • Not designed for cutting stems that are too thick for the blade
  • Requires the safety guard and front handle installed for operation
  • Blade stalls require immediate stop and switch release before clearing debris
  • Vibration and noise levels mean you should plan sessions and wear protection
  • Battery must be charged before first use and only charged with the specified charger
M: OA-GPT-54-NAN

Product Specification

Type

Hedge trimmer

Features

Additional handle

M: GO-GEM-FL-25

Product Description

Worx WG261E 20V PowerShare cordless hedge trimmer: nimble trimming for home hedges

Overview

The Worx WG261E 20V PowerShare cordless hedge trimmer is built for everyday hedge and bush shaping around the home. Powered by a 20V Max lithium system, it gives you cordless freedom while still delivering steady cutting for neat, healthy-looking plants.

If you want reliable results, the included safety and operating guidance, as referenced in the "Worx WG261E 20V PowerShare cordless hedge trimmer Manual", emphasizes basic setup checks, proper guard and handle installation, and safe working habits before you start cutting.

Design and performance

The trimmer uses a 44 cm cutting length with a 16 mm cutting diameter, and it runs at up to 2200 cuts per minute. A key comfort feature is the rear handle plus an all-around front switch lever for easier gripping during both top and side cuts.

Weight is designed for manageable handling: about 2.4 kg for WG261E models and around 2.0 kg for WG261E.1. For sound and comfort planning, it lists a weighted sound pressure of 69.6 dB(A) (with ear protection recommended) and vibration emission of 2.2 m/s2, so good control and proper technique matter.

Safer trimming habits

Before operation, always inspect the hedge for foreign objects such as wire fencing, and keep the blade away from people, walls, stones, vehicles, and other hazards. For safety, the manual guidance stresses using both hands, keeping the switch off when clearing jams, and wearing eye and hearing protection.

Because cutter blades can contact hidden wiring, the tool must be held by insulated gripping surfaces during cutting tasks. If the blade stalls, stop immediately and release the switches before attempting to clear debris.

Top results

  • Cordless 20V Max power for trimming without dragging extension cords around the garden
  • 44 cm cutting length with up to 2200/min no-load speed for efficient hedge shaping
  • Ergonomic control with two-hand operation and multi-position front switch lever for comfort
  • Practical maintenance approach: wipe clean, keep vents clear, and lubricate with WD-40
  • Safety-first workflow: guard and front handle required, plus jam-clearing with switch released

Notes

  • Charge the battery before first use and follow the specified charger procedures.
  • Do not operate without the safety guard and front handle installed.
  • Store dry and use the blade sheath for transport.

Pros

  • Cordless 20V Max design for flexible home hedge work
  • Long 44 cm cutting length for faster shaping
  • Comfortable grip options with the multi-position front switch lever
  • Includes safety guard and recommends protective gear
  • Clear operating guidance for top and side cutting styles

Cons

  • Only intended for domestic hedge and bush trimming, not heavy-duty cutting
  • Stopping and switching off is required before clearing jams
  • Requires correct assembly (front handle and guard) or it will not power on
  • Noise and vibration ratings suggest using hearing protection and good technique
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly