Manual.ly Logo

Worx WG157E.9 Manual

0.0 · 0 Ratings

PDF manual · 132 Pages

English

M: OA-GPT-54-NAN
page

/ 132

Loading...
9dd506a391eeac3c6f453ae5d21522a8d03d page 8
8
2-in-1 Grass Trimmer/Edger
EN
1. AUXILIARY HANDLE
2. LOCK OFF BUTTON
3. ON/OFF SWITCH
4. BATTERY PACK*
5. SAFETY GUARD
6. FLOWER GUARD
7. LINE CUTTER
8. TRIMMER HEAD COVER (See Fig.J)
9. CAP RELEASE LATCH (See Fig.J)
10. SPOOL (See Fig. J)
11. TRIMMER HEAD (See Fig. J)
12. EYELET (See Fig. J)
13. LINE FEED BUTTON (See Fig. H)
* Not all the accessories illustrated or described are
included in standard delivery.
TECHNICAL DATA
Type WG157E WG157E.9 (1-designation of
machinery, representative of Cordless Grass
Trimmer)
WG157E WG157E.9
Voltage 20V
Max** Lithium
No load speed 8500/min
Cutting diameter 25cm
Line diameter 1.65mm
Charging time Approx. 3hr
/
Machine weight 1.9kg 1.5kg
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
NOISE DATA
A weighted sound pressure L
pA
80dB(A)
A weighted sound power L
wA
94dB(A)
K
pA
3.0dB(A)
Wear ear protection.
VIBRATION INFORMATION
Typical weighted vibration
a
h
< 2.5m/s²
Uncertainty K=1.5m/s²
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING! The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained.
The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING! To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Avoid using tools in temperatures of 10ºC or less.
Plan your work schedule to spread any high
vibration tool use across a number of days.

Chat with your Worx WG157E.9 manual using AI

Get instant AI answers from your Worx WG157E.9 manual

Ask anything about the Worx WG157E.9. Answers come from this manual, with the pages they are based on.

WG157E.9 Maintenance Schedule

Before each use
Inspect for damage

Visually inspect the machine for damaged, missing or misplaced guards before every use. Do not operate if damaged.

After each use
Remove battery and store dry

Always remove the battery pack after use. Store the tool in a dry place protected from damage.

Show in the manual (page 13)
As needed
Clean with dry cloth

Wipe clean with a dry cloth. Never use water or chemical cleaners. Keep motor ventilation slots clear of debris.

Show in the manual (page 13)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend WG157E.9?

Yes No

Frequently Asked Questions

A

Yes. It is a 2-in-1 grass trimmer/edger intended to cut grass and weeds under bushes, along slopes, and for edges that are hard to reach with a lawn mower. Edging is handled by rotating the trimmer head as described in the operating steps.

Is this answer helpful?

A

The manual specifies 1.65 mm diameter cutting line only. Using other line sizes may cause the line to feed improperly, reduce cutting performance, or lead to unsafe operation or damage to the cutting head.

Is this answer helpful?

A

Yes. When switched on initially, the tool feeds a short length of line. A normal clattering sound can occur as the line contacts the line cutter, then the line is trimmed to the correct length. If you cannot hear cutting noise, allow the tool to stop fully and restart at full speed before feeding more line.

Is this answer helpful?

A

Follow the steps for removing the cap, then replacing the trimmer line and spool. The manual also includes guidance for manually winding the line. If you encounter feeding problems, check that the line is wound well and not tangled.

Is this answer helpful?

A

Charging time is listed as approximately 3 hours (model dependent). Battery safety instructions emphasize using only the specified charger, avoiding short-circuits, keeping terminals clean and dry, and removing the battery from the tool after use.

Is this answer helpful?

A

Common causes include broken or worn line, insufficient battery charge, grass entangled around the cutting head, or a spool that is not wound correctly. The troubleshooting guidance suggests checking for entanglement, ensuring full charge, and rewinding the spool correctly.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Cordless 20V Max lithium trimmer/edger for grass and weeds in tight areas
  • 2-in-1 edging capability for cleaner borders where mowers miss
  • Automatic line feed plus manual line feeding when you want precise control
  • 25 cm cutting diameter with required 1.65 mm line for effective trimming
  • Guard, auxiliary handle, and lock-off design support safer operation and control
VS

Disadvantages

  • Requires 1.65 mm cutting line; other line sizes may not feed or cut properly
  • Performance can drop if the battery is not fully charged or runs low during cutting
  • Cutting in dense grass may require multiple passes or trimming in stages
  • Line spools must be wound correctly; poor winding can reduce cutting time or feed
  • Always needs safety practices such as eye protection and keeping hands away from the head
M: OA-GPT-54-NAN

Product Specification

Type

Grass trimmer

Battery

20V, Li-Ion

Working width

9.84 in

Cutting system

Line

Line feed

Fully automatic

Line diameter

0.07 in

Line length

118.11 in

Features

Auxiliary handle

Noise level

94dB(A)

Weight

4.19 lb

Scope of delivery

without charger and battery

M: GO-GEM-FL-25

Product Description

Worx WG157E.9 20V PowerShare Cordless Lawn Trimmer Solo (Manual)

Keeping grass tidy near paths, edges, and under bushes is often where a mower struggles. The Worx WG157E.9 20V PowerShare Cordless lawn trimmer solo is designed for that exact in-between work: trimming grass and weeds in tight spots, then switching to edging for crisp border lines. It is a cordless line trimmer/edger that targets soft vegetation, slopes, and areas that a lawn mower cannot reach.

With a 20V Max lithium platform, the trimmer runs at up to 8500/min (no-load) and uses a 25 cm cutting diameter with 1.65 mm cutting line. You get practical convenience features like an automatic line feed system that extends the line when needed at startup, plus an option for manual line feeding if you want more control. For edging, the trimmer head rotates in one direction, letting you refine the look of sidewalks, driveways, and garden boundaries.

Ergonomics and control matter for backyard tools, so this model includes an auxiliary handle, a safety guard, and a lock-off approach to help reduce accidental starts. The manual guidance also emphasizes safe handling: wear eye protection, keep the tool below waist level, and let the cutting head fully stop after switching off before setting it down.

Line changes and spool management are straightforward, but they are an important part of ownership. The tool includes instructions for removing the cap, replacing the line and spool, and manually winding line when required. If the trimmer does not cut well, common causes in the troubleshooting guidance include broken line, insufficient battery charge, grass entangled around the cutting head, or a poorly wound spool.

Key results (what matters most)

  • Cordless 20V Max lithium line trimmer built for edging and hard-to-reach lawn areas
  • 25 cm cutting diameter with 1.65 mm line for consistent soft-weed trimming
  • Automatic line feed plus manual line feed for quick adjustments during work
  • Safety guard, lock-off, and recommended PPE to support safer trimming sessions
  • Low-maintenance operation: no user lubrication required, clean with a dry cloth

Notes

  • Always use 1.65 mm cutting line; other sizes may not feed correctly.
  • Battery runtime depends on grass height and cutting approach; trim in stages for best results.
  • Store the tool and battery in a dry place, and remove the battery after use.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly