Manual.ly Logo

Worx WG119E Manual

0.0 · 0 Ratings

PDF manual · 104 Pages

English

M: QW-35-FL
page

/ 104

Loading...
e8d04b8c7a61cd5aee65b9ab216f5f31cf4f page 8
8
2-in-1 Grass Trimmer/Edger
EN
1. ON/OFF SWITCH
2. AUXILIARY HANDLE
3. HANDLE ROTATION LOCKING MECHANISM
4.
HEIGHT ADJUSTMENT LOCKING MECHANISM
5. TELESCOPE TUBE
6. CUTTING HEAD ADJUSTMENT BUTTON
7. MOTOR HOUSING
8. FLOWER GUARD
9. CUTTING HEAD
10. SAFETY GUARD
11. EXTENSION CORD HOLDER
12. LINE CUTTER (See Fig. B)
13. LINE FEED BUTTON (See Fig. H)
14. CUTTING HEAD COVER (See Fig. J)
15. CAP RELEASE LATCH (See Fig. J)
16. SPOOL (See Fig. J)
17. EYELET (See Fig. J)
Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
Type WG119E (1-designation of machinery,
representative of Lawn Trimmer and Edge
Trimmer)
Rated voltage 220-240V~50/60Hz
Power 550W
No load speed 8900/min
Max. cutting diameter 30cm
Diameter of line 1.65mm
Line length 2x5m
Weight 2.4kg
Protection class
/II
NOISE DATA
A weighted sound pressure L
pA
=84dB(A)
K
pA
3.0dB(A)
A weighted sound power L
wA
=96dB(A)
Wear ear protection.
VIBRATION INFORMATION
Typical weighted vibration
a
h
= 2.7m/s²
Uncertainty K=1.5m/s²
WARNING! The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring it
is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING! To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Avoid using tools in temperatures of 10
0
C or less
Plan your work schedule to spread any high vibration
tool use across a number of days.

Chat with your Worx WG119E manual using AI

Get instant AI answers from your Worx WG119E manual

Ask anything about the Worx WG119E. Answers come from this manual, with the pages they are based on.

WG119E Maintenance Schedule

Regularly
Inspect and maintain the machine regularly

Inspect and maintain the machine regularly. Have repairs done only by an authorized repairer.

Show in the manual (page 10)
Before use
Check power cord for damage or aging

Before use, check the supply and extension cord for signs of damage or aging. Do not use if damaged.

Before use
Visually inspect guards and shields

Always visually inspect the machine for damaged, missing, or misplaced guards or shields before use.

After each use
Wipe clean with a dry cloth

Never use water or chemical cleaners. Wipe the trimmer clean with a dry cloth after use.

Show in the manual (page 12)
Continuously
Keep ventilation slots clear of debris

Ensure motor ventilation openings are kept clear of debris to prevent overheating.

Show in the manual (page 10)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WG119E?

Yes No

Frequently Asked Questions

A

The Worx WG119E has a maximum cutting diameter of 30cm, allowing it to handle most residential garden edges and grass patches effectively.

Is this answer helpful?

A

To manually feed the line, press and release the line feed button while gently pulling the line until it reaches the cutter. If too much line is fed, remove the cover and rotate the spool counter-clockwise to shorten it.

Is this answer helpful?

A

Yes, the machine is designed for use on slopes, but users must always ensure they have firm footing and maintain balance. Never run on slopes and keep hands and feet away from the cutting area.

Is this answer helpful?

A

You must use nylon line with a maximum diameter of 1.65mm. Using thicker or metal lines can damage the motor and void the warranty.

Is this answer helpful?

A

Only qualified persons should replace the mains lead or plug. If the cord is damaged, contact the manufacturer or service agent to avoid electrical hazards.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Versatile 2-in-1 design functions as both a grass trimmer and an edger
  • Lightweight at 2.4kg with a telescopic shaft for easy handling
  • Powerful 550W motor runs at 8900 rpm for efficient cutting
  • Automatic line feed system simplifies operation and saves time
VS

Disadvantages

  • Vibration levels may cause fatigue during extended use periods
  • Noise level of 96dB(A) requires mandatory ear protection
  • Line capacity is limited requiring frequent refills for large areas
  • Not suitable for cutting metal or extremely thick woody vegetation
M: QW-35-FL

Product Specification

Type

String Trimmer

Power

550W

Cutting Width

12 inches

Cutting System

Line (2-line technology)

Line Advance

Fully Automatic

Line Diameter

0.07 inches

Line Length

16 feet

Features

Softgrip, Extra Handle

Weight

6.61 lbs

M: QW-35-FL

Product Description

Worx WG119E Electric Grass Trimmer: The Ultimate 2-in-1 Garden Solution

Gardening requires precision, power, and versatility. The Worx WG119E Electric Grass Trimmer stands out as a robust tool designed to handle the toughest edges and hard-to-reach grass patches that traditional lawnmowers simply cannot touch. This powerful 550-watt machine combines the functionality of a grass trimmer and an edger into one lightweight package, making it an essential addition to any homeowner's toolkit.

Weighing only 2.4kg, the WG119E is easy to maneuver even on steep slopes or around delicate flower beds. Its telescopic shaft allows for height adjustments, ensuring comfortable operation for users of all sizes. The adjustable auxiliary handle provides extra stability, while the rotating handle mechanism lets you find the perfect grip angle. Whether you are trimming under bushes or creating crisp borders along your driveway, this tool delivers consistent performance with every pass.

One of the standout features is the automatic line feed system. When you switch on the trimmer, the cutting line automatically feeds out until it reaches the correct length, signaled by a distinct clattering sound that stops once the cut is made. For those moments when you need more line, a manual feed button allows for quick and easy extension without stopping the motor completely. The unit uses durable nylon line with a maximum diameter of 1.65mm, ensuring clean cuts through thick weeds and tough grass.

Safety is paramount in the design of the WG119E. It features a safety guard, a flower guard to protect delicate plants, and a double-insulated housing. The machine includes clear warnings about vibration exposure and noise levels, encouraging users to wear appropriate protective gear like ear defenders and eye protection. With a no-load speed of 8900 rpm, it cuts efficiently while maintaining control.

Maintaining the Worx WG119E is straightforward. There are no user-serviceable parts inside, so cleaning involves simply wiping the exterior with a dry cloth and keeping ventilation slots free of debris. Always remember to disconnect the power cord before performing any maintenance or storage tasks. Store the unit in a dry place out of reach of children to ensure longevity and safety.

Notes

  • Always use a residual current device (RCD) with a tripping current of no more than 30mA.
  • Do not operate the machine in wet weather or near standing water.
  • Ensure the cutting line is wound correctly to prevent excessive vibration.
  • Replace the line spool with the specific WA0007 model recommended by the manufacturer.
M: QW-35-FL

© Copyright 2026 Manual.ly