Manual.ly Logo

Worx Axis WX550.9 Manual

0.0 · 0 Ratings

PDF manual · 80 Pages

English

M: OA-GPT-54-NAN
page

/ 80

Loading...
8a9f84d88ea0f04748dc29dfe55758ef6bb7 page a
20V Li-Ion multi-purpose saw EN
10
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is 2 saws in 1 tool with rep saw and
jig saw function, intended for sawing wood, plastic,
metal and building materials while resting firmly on
the workpiece. It is suitable for straight and curved
cuts.
ASSEMBLY AND OPERATION
ACTION FIGURE
BEFORE OPERATION
Removing the battery pack See Fig. A1
Charging the battery pack See Fig. A2
Installing the battery pack See Fig. A3
Working mode adjustment
Position I worked as a jigsaw.
Position II worked as a
reciprocating saw.
NOTE: Select the blade best
suitable for the working mode
for better cutting performance
(special reciprocating saw blade
not included).
WARNING!
• To avoid being pinched,
keep hands away from the
hinge when changing positions.
• To avoid tool being turned on
accidentally, make sure keep
your hands away from the lock-
off button.
• Before operation, make sure
the pivot release button is
locked into position.
See Fig. B1-C4
ASSEMBLY
Replacing the saw blade
When using jig saw mode,
the blade teeth face outward
as shown in Fig. D1; while in
rep saw mode, the blade teeth
should face as shown in Fig. D3.
CAUTION: Keep your
hands away from the
lock-off button to prevent
switch actuation before making
any adjustments or removing
or installing attachments or
accessories.
See Fig. D1-D3
OPERATION
WARNING! Burn hazard. Do not touch the
blade immediately after use. Contact with the
blade may result in personal injury.
Switching On and Off
NOTE: For safety reasons the
On/Off switch of the machine
cannot be locked; it must
remain pressed during the
entire operation.
See Fig. E
Pendulum Function See Fig. F1, F2
Cutting
WARNING!
• Never hold the pivot
head when operating the tool.
• Never hold the motor cover
when operating the tool.
Always use a blade suited to the
material and material thickness
to be cut. Before cutting any
type of material, be sure it is
firmly anchored or clamped to
prevent slipping. Holding the
work by hand or against your
body leaves it unstable and may
lead to loss of control.
• Whenever possible, the saw
foot plate must be held firmly
against the material being
cut. This will prevent the saw
from jumping or vibrating and
minimize blade breakage.
See Fig. G1 – G3
LED Work Light See Fig. H
WORKING HINTS FOR YOUR
MULTI-PURPOSED SAW
If your power tool becomes too hot, run no-load
for 2-3 minutes to cool the motor. Avoid prolonged
usage at very low speeds.
Any movement of the material may affect the quality
of the cut. The blade cuts on the upward stroke and
may chip the uppermost surface.
Ensure your uppermost surface is a non-visible
surface when your work is finished.
MAINTENANCE
Your power tool requires no additional
lubrication or maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through
the ventilation slots. This is normal and will not
damage your power tool.

Chat with your Worx Axis WX550.9 manual using AI

Get instant AI answers from your Worx Axis WX550.9 manual

Ask anything about the Worx Axis WX550.9. Answers come from this manual, with the pages they are based on.

Axis WX550.9 Maintenance Schedule

As needed
Clean tool with dry cloth

Wipe the power tool clean with a dry cloth. Never use water or chemical cleaners.

Show in the manual (page 10)
As needed
Keep ventilation slots clean

Ensure motor ventilation slots remain free of dust and debris to maintain proper cooling.

Show in the manual (page 10)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Axis WX550.9?

Yes No

Frequently Asked Questions

A

It is a 2-in-1 tool. You can use it as a jigsaw for detailed, curved cuts or switch it to reciprocating saw mode for faster, rougher cutting tasks.

Is this answer helpful?

A

It is designed for wood, plastic, metal, PVC pipe, and other common building materials. Cutting capacity varies by mode and material thickness.

Is this answer helpful?

A

Yes. The pendulum function helps the blade cut more aggressively and can improve speed in suitable materials when used correctly.

Is this answer helpful?

A

Yes. It runs on Worx’s 20V PowerShare battery system, giving you cordless freedom for workshop and jobsite work.

Is this answer helpful?

A

The manual recommends eye protection, ear protection, a dust mask, and protective gloves. The battery should also be removed before changing blades or accessories.

Is this answer helpful?

A

Keep it dry, wipe it with a clean cloth, and clear dust from the ventilation slots and controls. No special user servicing or lubrication is normally required.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • 2-in-1 design switches between jigsaw and reciprocating saw for more job flexibility.
  • 20V PowerShare battery platform supports cordless convenience and easy mobility.
  • Pendulum function, LED light, and steady base improve cutting control and visibility.
  • Suitable for wood, plastic, metal, PVC pipe, and light construction materials.
VS

Disadvantages

  • Battery life and charger setup may depend on the exact package version.
  • No special reciprocating saw blade is included in the standard accessory list.
  • Noise and vibration levels require protective gear during longer sessions.
  • Blade changes and mode switching need care to avoid pinching or accidental start-up.
M: OA-GPT-54-NAN

Product Specification

Type

Orbital action jigsaw

Battery

20V, Li-Ion

No-load stroke rate

0-3000/min

Features

Stroke rate adjustment

Weight

3.31 lb

Scope of delivery

without charger and battery

M: OA-GPT-54-NAN

Product Description

Worx WX550.9 Axis 20V PowerShare Cordless Orbital Jigsaw Solo incl. Accessories Manual

The Worx WX550.9 stands out as a practical 2-in-1 cutting solution for DIY users who want flexibility without carrying two separate tools. Designed around the 20V PowerShare platform, it combines a jigsaw and a reciprocating saw in one compact body, making it useful for straight cuts, curved cuts, and quick demolition-style work. The Worx WX550.9 Axis 20V PowerShare cordless orbital jigsaw solo incl. accessories Manual shows that this model is built for versatility first, with clear guidance for switching modes and using the correct blade for each task.

In jigsaw mode, the tool is well suited for detailed work on wood, plastic, aluminum, and light steel. In reciprocating mode, it becomes a more aggressive cutter for thicker sections such as wooden beams, plastic pipe, and steel pipe. The pendulum function helps improve cutting speed and efficiency, while the LED work light adds visibility in darker corners or under benches. A no-load speed of up to 3000/min and a 20 mm stroke length give it enough range for everyday workshop tasks.

What makes the WX550.9 appealing is its balance between convenience and control. The tool uses a pivoting head with a secure lock-off design, so the user can change working positions and blade direction with more confidence. The shoe/base support also helps keep the saw steady against the workpiece, which is important for cleaner cuts and less vibration. For best results, the instructions recommend moderate pressure, a firm grip, and matching the blade to the material being cut.

The manual also places strong emphasis on safety and maintenance. Hearing protection, eye protection, dust masks, and gloves are all recommended depending on the task. The battery system should be removed before changing accessories, and the tool should be kept clean and dry after use. There is no complex servicing required; a dry cloth and clean ventilation slots are usually enough to keep it in good condition.

Notes

  • Best for users who want one tool for both precision cutting and rougher cutting jobs.
  • Blade choice matters: wood, metal, aluminum, and reciprocating blades each serve a different purpose.
  • The tool is designed to stay stable on the workpiece for cleaner, safer cuts.

Summary

Worx WX550.9 is a smart cordless multi-saw for flexible cutting tasks, backed by clear safety guidance, practical accessories, and a simple design that suits home workshops and renovation projects.

M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly