T.I.P. Garden Pump Manual
PDF manual · 140 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your T.I.P. Garden Pump manual using AI
Get instant AI answers from your T.I.P. Garden Pump manual
Ask anything about the T.I.P. Garden Pump. Answers come from this manual, with the pages they are based on.
Garden Pump Maintenance Schedule
Inspect the pump visually before every use, especially the mains connection line and plug. Ensure all screws are tight and connections are in perfect condition.
If not used for an extended period, open drain screw to empty water, flush with clean water, and let body dry completely to prevent corrosion.
Ask a Question
Do you recommend Garden Pump?
Yes NoFrequently Asked Questions
It can pump clear, clean, or moderately dirty water with solid particles up to 3 mm. Do not use it for saltwater, sewage, flammable, corrosive, explosive, or other hazardous liquids.
Is this answer helpful?
The Garten-Jet 750 is rated at 600 W with a maximum flow of 2,800 l/h, 4.2 bar pressure, and 42 m delivery height. The 800 W Garten-Jet 1000 Plus reaches 3,500 l/h, 4.6 bar, and 46 m.
Is this answer helpful?
Yes. Fill the pump housing completely with water before initial operation or restarting after a long pause. Filling the suction line is strongly recommended because it can shorten the priming time.
Is this answer helpful?
Yes, only when no people or animals are in contact with the water. Install it securely, flood-proof, and at least two metres from the water edge. Use an electrical supply protected by a 30 mA RCD.
Is this answer helpful?
Use a suction hose matching the 1-inch suction connection. Its intake should include a filter and non-return valve. Keep the intake at least 0.3 m below the water surface and away from the bottom.
Is this answer helpful?
Common causes include an unfilled pump housing, air leaks in the suction line, a blocked or faulty non-return valve, or excessive suction and delivery height. Check seals, hose routing, immersion depth, and priming.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Self-priming design supports garden irrigation, water transfer, drainage, and cleaning tasks.
- Garten-Jet 1000 Plus delivers up to 3,500 l/h, 4.6 bar pressure, and 46 m delivery height.
- Both models accept particles up to 3 mm and can draw water from up to 9 m depth.
- Integrated thermal motor protection helps prevent damage caused by overload.
- Optional controllers can automate water delivery and may add dry-run protection.
Disadvantages
- Not suitable for swimming pools, public drinking-water systems, commercial use, or continuous circulation.
- Pump housing must be filled with water before first use and after extended storage.
- Cannot pump saltwater, sewage, flammable, corrosive, explosive, or hazardous liquids.
- Requires a dry, frost-protected installation area and a 30 mA RCD-protected electrical supply.
- The 1.5 m power cable may require a suitable splash-protected extension cable.
Product Specification
Features
tankless
Product Description
T.I.P. Electric Garden Pump Manual: Reliable Water Movement for Home Gardens
The T.I.P. Electric Garden Pump range is designed for practical water supply jobs around the home and garden. Available in Garten-Jet 750 and Garten-Jet 1000 Plus versions, these self-priming electric pumps can move clear, clean, or moderately dirty water containing particles up to 3 mm. They are suitable for irrigation, draining containers, drawing water from wells or cisterns, emptying ponds, and cleaning patios or paths.
The T.I.P. Electric Garden Pump Manual highlights a straightforward setup process built around safe positioning, airtight pipework, and correct priming. Before starting, the pump housing must be filled completely with water. Filling the suction line is also recommended to speed up priming. A suction hose with a filter and non-return valve helps prevent debris from entering the system and stops water from draining back after shutdown.
Performance Options
The Garten-Jet 750 uses a 600 W motor and offers a maximum flow rate of 2,800 litres per hour. It can reach a maximum pressure of 4.2 bar and a delivery height of 42 m. The Garten-Jet 1000 Plus increases output with an 800 W motor, a maximum flow rate of 3,500 litres per hour, 4.6 bar maximum pressure, and a 46 m delivery height. Both models support a maximum suction height of 9 m and use 1-inch suction and pressure connections.
These compact pumps measure 36 x 17.5 x 24.5 cm, making them convenient for fixed garden installations where space is limited. They should be placed upright on a solid, dry, level surface with adequate motor ventilation. For a permanent installation, an anti-vibration layer can help reduce operating vibration.
Safe and Efficient Operation
The pumps are intended for private household use, not commercial duty or continuous circulation. They must not be used for saltwater, sewage, flammable, corrosive, explosive, or hazardous liquids. Water temperature must stay between 2 C and 35 C, while ambient conditions should remain between 5 C and 40 C.
Electrical safety is essential. The pump requires a grounded 230 V, 50 Hz supply protected by a 30 mA residual current device. Keep plugs and electrical connections dry, avoid rain exposure, and never run the pump dry. Integrated thermal motor protection switches the motor off during overload and allows restart after cooling.
Note: Drain, rinse, and dry the pump before long storage periods. Keeping it in a dry, frost-protected location helps prevent freeze damage and corrosion.
For users who want tap-like water access, compatible mechanical or electronic controllers can automate pump operation. Some optional controllers also provide dry-run protection, adding convenience and helping protect the pump during low-water conditions.
Search for 67,706 Manuals online
Type-in Brand or Model