Manual.ly Logo

Smartwares SB6.4 Manual

0.0 · 0 Ratings

PDF manual · 3 Pages

English

M: gpt-5.6-terra
page

/ 3

Loading...
1c40cb6b38f704edef892ea8dfb7125db719 page 2
extinguisher itself can be cleaned with a moist cloth. Please ensure that the bracket is still firmly
mounted on the wall.
It is advised to take the extinguisher from the bracket and shake it or gently tap it against the floor at
least once per year. This way the extinguishing agent does not sink to the bottom of the extinguisher,
for powder extinguishers especially. Weighing the extinguisher will give information if the extinguisher
was partially discharged. If the weight of the extinguisher decreases by more than 10 percent it needs
to be refilled. The hose can be removed and checked or cleaned, the O ring can be replaced and used
to connect the hose back to the extinguisher.
Visual inspection summary every 3 months:
• Safety pin check – in place?
• Pressure gauge needle – in green area?
• Hose – no corrosion or damage?
• Wipe down and read the cylinder
• Check mounting bracket – still mounted firmly?
Every 12 months:
• Check weight of the extinguisher
• Remove hose and check for damage or obstruction
Extended maintenance
For commercial buildings, maintenance may be extended. It can only be carried out by a qualified
person. Original spare parts must be used, please check the item code on www.smartwares.eu for
more information. Extended maintenance is advised every 5 years. The extended maintenance costs
may be higher than the costs for a new fire extinguisher. If you choose to replace the fire extinguisher
please follow our advise for disposal of a fire extinguisher.
Every 5 years the extinguishing agent in a foam extinguisher must be replaced, every 10 years the
powder extinguishing agent must be replaced. Until then, the extinguishing agent can be checked
visually for clotting (powder) or particles. The weight of the extinguishing agent should be maximum
10% less than the original weight. When in doubt, the extinguishing agent must be replaced.
Extended maintenance steps:
• Visual inspection (see above)
• Discharge the extinguisher and temporarily store the extinguishing agent in a suitable
container.
• Remove the operating handle and check all parts for damage.
• Rinse out the fire extinguisher and perform visual check on corrosion.
• Replace the hose and the O ring
• Refill the extinguisher with the same extinguishing agent
• Re-pressurize the extinguisher
• Mark the extinguisher with a new service label.

Chat with your Smartwares SB6.4 manual using AI

Get instant AI answers from your Smartwares SB6.4 manual

Ask anything about the Smartwares SB6.4. Answers come from this manual, with the pages they are based on.

SB6.4 Maintenance Schedule

Remind me when maintenance is due
Quarterly
Visual inspection of fire extinguisher

Check safety pin, pressure gauge in green zone, hose for damage, legible labels, and wall mounting. Clean cylinder with damp cloth.

Yearly
Weigh and shake extinguisher

Check weight; refill if reduced by over 10%. Shake or tap lightly to prevent powder settling.

Every 5 years
Extended maintenance service

Qualified person only. Discharge, inspect parts, check corrosion, replace hose and O-ring, refill, and repressurize.

Every 5 years
Replace foam agent

Change the extinguishing agent in foam extinguishers every five years.

Every 10 years
Replace powder agent

Change the powder extinguishing agent every ten years. Check visually for clumping before replacement.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend SB6.4?

Yes No

Frequently Asked Questions

A

The Smartwares SB6.4 is a foam fire extinguisher in the Smartwares SB series. It is intended to support fire preparedness by helping address a small, early-stage fire when conditions are safe.

Is this answer helpful?

A

Inspect it every three months. Check that the safety pin is in place, the pressure gauge is in the green area, the hose has no damage or corrosion, the labels are readable, and the bracket remains firmly mounted.

Is this answer helpful?

A

At least annually, weigh the extinguisher and inspect the hose for damage and clear passage. If the unit has lost more than 10 percent of its original weight, it should be refilled by a qualified professional.

Is this answer helpful?

A

Extended maintenance is recommended every five years and should be completed by a qualified service provider. For foam extinguishers, the extinguishing agent should be replaced during this service.

Is this answer helpful?

A

It must be refilled immediately by a qualified person, even if only part of the contents was discharged. Contact local fire safety professionals for guidance on cleaning and next steps after use.

Is this answer helpful?

A

Advanced maintenance and refilling should be handled by qualified personnel. This work involves depressurizing, inspection, replacement parts, refilling, and repressurizing, all of which require proper expertise and equipment.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Foam extinguisher format provides a practical addition to household fire preparedness.
  • Routine checks are straightforward: inspect the safety pin, pressure gauge, hose, labels, and bracket.
  • A three-month visual inspection schedule helps identify visible damage or pressure concerns early.
  • Professional servicing guidance supports safer long-term ownership and reliable readiness.
VS

Disadvantages

  • The extinguisher requires regular inspection and qualified refilling after any discharge.
  • Maintenance rules may differ by country, building type, insurance provider, and local standards.
  • Foam extinguishing agent requires replacement every five years during extended maintenance.
  • It should only be used on small, early-stage fires; larger fires require immediate evacuation.
M: gpt-5.6-terra

Product Specification

Type

Portable fire extinguisher

Design

Stored-pressure extinguisher

Extinguishing agent

Foam, 13.23 lb

Fire class

AB

Extinguishing units

6 extinguishing units

Operating time

42 sec

Discharge range

26.25 ft

Operating temperature range

+41°F to +140°F

Weight

21.27 lb

M: gpt-5.6-terra

Product Description

Smartwares SB6.4 - Read, Download & Print Free

Practical Fire Safety Support for Everyday Preparedness

The Smartwares SB6.4 is a foam fire extinguisher designed to help households and smaller premises prepare for an early-stage fire emergency. Keeping a suitable extinguisher nearby can make a meaningful difference when a small incident occurs, but it should only be used when it is safe to do so. If a fire grows beyond a manageable size, everyone should leave the area immediately and contact emergency services.

This Smartwares model is part of the SB foam extinguisher series. Like other permanently pressurized extinguishers, it contains its extinguishing agent under continuous pressure. That design makes regular checks especially important: the unit must remain accessible, protected from damage, and ready for use. A well-chosen mounting location, a firm wall bracket, and clear visibility all support faster action in a stressful moment.

Simple Checks That Help Maintain Readiness

A visual inspection every three months is recommended. Confirm that the safety pin is still fitted and that the pressure gauge needle remains in the green area. Check the hose, where present, for corrosion, cracks, blockage, or other signs of damage. The cylinder should be wiped clean with a damp cloth so its instructions remain readable, while the mounting bracket should be checked for secure attachment.

An annual inspection should also include weighing the extinguisher and examining the hose more closely. A weight loss of more than 10 percent can indicate partial discharge or another problem and requires refilling by a qualified professional. Periodically removing the extinguisher from its bracket and gently moving it can also help keep the extinguishing agent in suitable condition.

Professional Service Matters

Fire extinguisher maintenance requirements may vary by country, insurance policy, and building type. Commercial locations can be subject to specific standards and must use qualified maintenance providers. Professional extended servicing is recommended every five years. For foam extinguishers, the extinguishing agent should be replaced at that interval. Any extinguisher that has been used, even briefly, must be refilled promptly by a qualified person.

The Smartwares SB6.4 supports a responsible approach to home fire readiness: inspect it routinely, maintain it professionally, and never take unnecessary risks during an emergency.

Notes

  • Follow local fire safety rules and disposal guidance.
  • Use original compatible replacement parts when servicing is required.
  • Dispose of depressurized extinguishers through approved small chemical waste channels.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly