Manual.ly Logo

Smartwares SB6.4 Manual

0.0 · 0 Ratings

PDF manual · 3 Pages

English

M: gpt-5.6-terra
page

/ 3

Loading...
1c40cb6b38f704edef892ea8dfb7125db719 page 1
Maintenance fire extinguishers
General information
This information contains a general guideline for maintaining your fire extinguishers. If you are using
fire extinguishers in a commercial environment, legislation and insurance requirements may apply.
Please check with your local authorities to make sure you comply with all necessary rules and
regulations. The information in this document is general information that may not cover all situations
that may occur during maintenance.
Maintenance on a fire extinguisher should always be carried out by a qualified person. In different
European countries these qualified maintenances companies and the guidelines they follow are
identified in different ways. In the Netherlands, these persons are “REOB certified”, in Germany . In
each country, maintenance and location guideline may be present, there are described in local
standards such as:
Netherlands: REOB certified, NEN-2559 https://hetccv.nl/certificatie-inspectie/vakman/onderhoud-
blusmiddelen/
Belgium: NBN S21-050
Germany: DIN 14406
Austria: önorm F-1053
UK: BS 5306-3:2009
All local standards are based on product standard EN-3 and give specific information on where to
place extinguishers or how often to maintain them.
For consumers in most European homes, owning a fire extinguishers is not obligatory. Keeping a fire
extinguisher nearby to extinguishing a small, starting fire could however save lives and prevent a lot
of damages. The Dutch fire fighters advise consumers to only fight fires that have the size of a
football. If the fire is bigger, evacuate everyone from the building and call the fire fighters.
Testing and filling instructions
These instructions cover the most basic guidelines to test and refill a Smartwares extinguisher. The
powder extinguisher BB series, foam extinguisher SB series and wet chemical extinguisher VB series
are stored pressure extinguishers. They consist of a cylinder containing the extinguishing agent
(powder, foam or a wet chemical solution) and are permanently pressurized.
Visual inspection
The purchasing date sticker that is included with the extinguisher allows you to mark the installation
date as a reminder. Starting from installation a visual inspection is necessary because the extinguisher
is no longer protected by the giftbox.
Every 3 months, check if the safety pin is still in place and read the pressure gauge (manometer) on
the extinguisher. This is not applicable for CO2 extinguishers, they do not have a pressure gauge. The
pressure gauge needle must be in the green area. If a rubber hose is present, check the hose for
corrosion and other damages. The instructions on the extinguisher should be readable, the

Chat with your Smartwares SB6.4 manual using AI

Get instant AI answers from your Smartwares SB6.4 manual

Ask anything about the Smartwares SB6.4. Answers come from this manual, with the pages they are based on.

SB6.4 Maintenance Schedule

Remind me when maintenance is due
Quarterly
Visual inspection of fire extinguisher

Check safety pin, pressure gauge in green zone, hose for damage, legible labels, and wall mounting. Clean cylinder with damp cloth.

Yearly
Weigh and shake extinguisher

Check weight; refill if reduced by over 10%. Shake or tap lightly to prevent powder settling.

Every 5 years
Extended maintenance service

Qualified person only. Discharge, inspect parts, check corrosion, replace hose and O-ring, refill, and repressurize.

Every 5 years
Replace foam agent

Change the extinguishing agent in foam extinguishers every five years.

Every 10 years
Replace powder agent

Change the powder extinguishing agent every ten years. Check visually for clumping before replacement.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend SB6.4?

Yes No

Frequently Asked Questions

A

The Smartwares SB6.4 is a foam fire extinguisher in the Smartwares SB series. It is intended to support fire preparedness by helping address a small, early-stage fire when conditions are safe.

Is this answer helpful?

A

Inspect it every three months. Check that the safety pin is in place, the pressure gauge is in the green area, the hose has no damage or corrosion, the labels are readable, and the bracket remains firmly mounted.

Is this answer helpful?

A

At least annually, weigh the extinguisher and inspect the hose for damage and clear passage. If the unit has lost more than 10 percent of its original weight, it should be refilled by a qualified professional.

Is this answer helpful?

A

Extended maintenance is recommended every five years and should be completed by a qualified service provider. For foam extinguishers, the extinguishing agent should be replaced during this service.

Is this answer helpful?

A

It must be refilled immediately by a qualified person, even if only part of the contents was discharged. Contact local fire safety professionals for guidance on cleaning and next steps after use.

Is this answer helpful?

A

Advanced maintenance and refilling should be handled by qualified personnel. This work involves depressurizing, inspection, replacement parts, refilling, and repressurizing, all of which require proper expertise and equipment.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Foam extinguisher format provides a practical addition to household fire preparedness.
  • Routine checks are straightforward: inspect the safety pin, pressure gauge, hose, labels, and bracket.
  • A three-month visual inspection schedule helps identify visible damage or pressure concerns early.
  • Professional servicing guidance supports safer long-term ownership and reliable readiness.
VS

Disadvantages

  • The extinguisher requires regular inspection and qualified refilling after any discharge.
  • Maintenance rules may differ by country, building type, insurance provider, and local standards.
  • Foam extinguishing agent requires replacement every five years during extended maintenance.
  • It should only be used on small, early-stage fires; larger fires require immediate evacuation.
M: gpt-5.6-terra

Product Specification

Type

Portable fire extinguisher

Design

Stored-pressure extinguisher

Extinguishing agent

Foam, 13.23 lb

Fire class

AB

Extinguishing units

6 extinguishing units

Operating time

42 sec

Discharge range

26.25 ft

Operating temperature range

+41°F to +140°F

Weight

21.27 lb

M: gpt-5.6-terra

Product Description

Smartwares SB6.4 - Read, Download & Print Free

Practical Fire Safety Support for Everyday Preparedness

The Smartwares SB6.4 is a foam fire extinguisher designed to help households and smaller premises prepare for an early-stage fire emergency. Keeping a suitable extinguisher nearby can make a meaningful difference when a small incident occurs, but it should only be used when it is safe to do so. If a fire grows beyond a manageable size, everyone should leave the area immediately and contact emergency services.

This Smartwares model is part of the SB foam extinguisher series. Like other permanently pressurized extinguishers, it contains its extinguishing agent under continuous pressure. That design makes regular checks especially important: the unit must remain accessible, protected from damage, and ready for use. A well-chosen mounting location, a firm wall bracket, and clear visibility all support faster action in a stressful moment.

Simple Checks That Help Maintain Readiness

A visual inspection every three months is recommended. Confirm that the safety pin is still fitted and that the pressure gauge needle remains in the green area. Check the hose, where present, for corrosion, cracks, blockage, or other signs of damage. The cylinder should be wiped clean with a damp cloth so its instructions remain readable, while the mounting bracket should be checked for secure attachment.

An annual inspection should also include weighing the extinguisher and examining the hose more closely. A weight loss of more than 10 percent can indicate partial discharge or another problem and requires refilling by a qualified professional. Periodically removing the extinguisher from its bracket and gently moving it can also help keep the extinguishing agent in suitable condition.

Professional Service Matters

Fire extinguisher maintenance requirements may vary by country, insurance policy, and building type. Commercial locations can be subject to specific standards and must use qualified maintenance providers. Professional extended servicing is recommended every five years. For foam extinguishers, the extinguishing agent should be replaced at that interval. Any extinguisher that has been used, even briefly, must be refilled promptly by a qualified person.

The Smartwares SB6.4 supports a responsible approach to home fire readiness: inspect it routinely, maintain it professionally, and never take unnecessary risks during an emergency.

Notes

  • Follow local fire safety rules and disposal guidance.
  • Use original compatible replacement parts when servicing is required.
  • Dispose of depressurized extinguishers through approved small chemical waste channels.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly