Manual.ly Logo

Shark Helmets EvoLine Series 3 Manual

0.0 · 0 Ratings

PDF manual · 106 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 106

Loading...
91c7425f2f266e9d7c590e40ba03a9cb19d9 page 12
18
AERODYNAMICS AND ACOUSTICS / VISOR
AERODYNAMICS AND ACOUSTICS
The EvoLine
®
has been carefully designed to
offer you the greatest pleasure in use.
The profile of the helmet, its impermeability
and the quality of the materials used enable air
noise on the crown of the head and aerodyna-
mic turbulence to be filtered as far as possible.
In order for the use of your helmet to be as
pleasant as possible, it is important for tur-
bulence or air eddies created by the fairings
not to impair the aerodynamic qualities of your
EvoLine
®
helmet. The shape of the fairings of
your motorcycle and/or your size should not
cause air eddies to reach the lower part of
your helmet.
THE VISOR
The visor on your helmet is injected using a
specific polycarbonate material developed for
the excellence of its optical qualities and its
high quality performance in resisting shocks.
Your visor is certified Total Vision. Its external
surface is treated to give high resistance to
scratches. The specific treatment applied to
its internal surface limits as far as possible the
risk of misting.
In order to prolong the life of these two treat-
ments as far as possible, you have to look after
your visor carefully.
When you clean your visor, leave it to soak in
tepid water (less than 40 degrees) and use a
soft cloth (100% cotton that does not pill) to
dry it. A little “neutral” soap (like household
soap) may help you to clean it.
WARNING! do not use window clea-
ning type products (based on alcohol
or other types of solvent) as these products
may damage the visor’s treatments.
The anti-scratch and antifog treatments are
active and their action may vary under atmos-
pheric conditions and under heavy rain.
Under difficult conditions, surface treatments
take time to recover their effectiveness; we
therefore advise you to put your helmet or the
visor in a dry, well ventilated place so that it
recovers its effectiveness.
In either the Integral or Jet position, the visor is
adjusted using the catch on the upper central
part of the visor.
In the Integral configuration, you have the
possibility of riding with the visor slightly open
(Figs. A – B);
Because of its original axis of rotation, the
visor remains close to the crown, thus avoi-
ding excessive aerodynamic resistance in the
open position.
A
B
VISOR
OwnerManualEvoCarbon.indd 18 24/07/14 16:06

Chat with your Shark Helmets EvoLine Series 3 manual using AI

Get instant AI answers from your Shark Helmets EvoLine Series 3 manual

Ask anything about the Shark Helmets EvoLine Series 3. Answers come from this manual, with the pages they are based on.

EvoLine Series 3 Maintenance Schedule

Remind me when maintenance is due
Every 5 years
Replace helmet

Replace the helmet five years after first purchase even if no damage is visible.

Every use
Inspect for damage and fit

Check helmet every time you use it for evidence of damage, wear, or if it fits snugly.

After any impact
Inspect or replace helmet

If subjected to any impact or dropped, return for inspection or replace immediately.

As needed
Clean interior padding

Hand wash cheek pads and head section in warm soapy water; air dry completely at room temperature.

Show in the manual (page 22)
As needed
Clean visor and sun shield

Soak in tepid water with neutral soap and soft cloth; do not use solvents or alcohol.

Show in the manual (page 18)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend EvoLine Series 3?

Yes No

Frequently Asked Questions

A

Press the red button on the chin protection to unlock. Lift the chin section forward until it locks at the back. Always perform this while stationary to ensure safety.

Is this answer helpful?

A

Replace the helmet immediately. Impact damage may not be visible. Continued use compromises safety and structural integrity.

Is this answer helpful?

A

The helmet lasts approximately five years from purchase. Replace it sooner if any impact occurs or if fit becomes loose.

Is this answer helpful?

A

Yes, use mild soap and water. Never use solvents, petroleum, or abrasive pastes as they damage the coating.

Is this answer helpful?

A

No. Never drill, cut, paint, or sticker the helmet. Modifications weaken the structure and eliminate protection.

Is this answer helpful?

A

Remove cheek pads and head liner. Wash with mild soap and warm water by hand. Do not use a dryer. Air dry completely.

Is this answer helpful?

A

Never use the sun shield at night or in poor visibility. Keep it raised. Use only the clear visor for night riding.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Converts effortlessly between integral and Jet configurations for versatility.
  • High quality polycarbonate visor with anti-scratch and anti-fog treatment.
  • Effective ventilation system to reduce fogging and heat during rides.
VS

Disadvantages

  • Must be replaced after 5 years regardless of visible condition.
  • Replacement required immediately after any impact or drop occurs.
  • Cannot use solvents or paint, limiting customization options significantly.
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Modular Helmet

Weight

3.97 lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Experience the ultimate versatility on the road with the Shark Evoline series3. Available in various colors and sizes, this modular helmet delivers exceptional performance for riders seeking flexibility. The innovative design allows the rider to switch between an integral full-face configuration and an open face Jet style. This conversion is secure and stable, ensuring aerodynamic integrity in every mode. The chin bar retracts perfectly without causing stability or weight imbalance. Refer to the Shark Evoline series3 (various colors/sizes) Manual for precise operation instructions regarding the conversion mechanism. Protection is a core priority. The helmet features a shell designed to absorb shock impact, utilizing high-quality materials for durability against high and low speed impacts. Safety starts with fit. Riders should measure their head circumference to ensure the helmet fits snugly without gaps. The chin strap system offers advanced locking mechanisms, including the Precise Lock or Double-D ring options. Always test the fit by checking for movement limits when fastened. If the helmet feels too loose, select a smaller size immediately.

Visor quality cannot be overlooked. The integrated visor uses injected polycarbonate to resist scratches and impacts. It offers excellent optical quality labeled Total Vision. Anti-fog and anti-scratch treatments extend visibility and lifespan. An external sun shield button controls the tinted insert for varying light conditions. Never use tinted visors at night or in poor visibility. Proper ventilation channels manage airflow to prevent overheating and fogging. The conversion process is simple. Press the red button on the chin protection to unlock. Lift the chin section forward until it locks at the back. Always perform this while stationary. Never convert while riding. The sun shield should be kept up in tunnels or at night.

The textile parts are washable. Remove cheek pads and head liner for hand washing with warm water. Do not use a dryer. Maintenance requires strict adherence to care instructions. Clean the textile parts with mild soap and water. Never use solvents or petroleum products on the shell or visor. Do not paint or sticker the helmet as this weakens the structure. Replace the helmet after five years or if any impact occurs, even if damage is not visible. Air dry all parts completely before reassembly. This ensures correct fit and safety. This gear combines style and function for modern motorcyclists. Whether commuting or touring, it offers reliable protection. Remember to keep the manual available for future reference regarding fit checks and care procedures. Ensure the sun shield is functional. Always buy genuine replacement parts.

Important Notes:

Check padding wear regularly. Ensure chin strap length is correct. Never drill into the shell. Verify visor locking mechanism before every ride. Protect from heat above 70 degrees Celsius. Do not modify the helmet. Consult official sources for warranty info and safety updates. Keep head measurement records for future size checks.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly