Manual.ly Logo

Scott Keeper 2 Manual

0.0 · 0 Ratings

PDF manual · 56 Pages

English

M: OA-GPT-5-NAN
page

/ 56

Loading...
8b1638c955bc6a5bac67eeb1fe5e34d6295f page 6
D. MISUSES
We recommend that the SCOTT product should not be left outside, exposed to high tem-
peratures or direct sunlight before use. Any product modifications may cause loss of pro-
tection and are therefore considered as improper use. Never tamper with any part of the
helmets. Helmets should not be adapted for the purpose of fitting accessories in a way not
recommended by the manufacturer.
• IV. PRODUCT INFORMATION
A. MARKING ON THE PRODUCTS
All certified helmets are labeled with corresponding seals indicating they have passed
the official tests. They are affixed in plain sight and may not be removed.
XXXX-XX / XXXXXX
XXXXXX |
|
XXXXXX |
XX - XX cm
Approx. XXXg
B. EXPLANATION OF MARKINGS
Commercial name
Model identification
Head circumference
Weight indications are defined without accessories, such as inner lining
Size
EN 1077 : 2007 / EN 12492 : 2012 : Harmonised technical standard used in the design
and certification.
The CE marking ensures compliance with the essential health and safety
requirements of Regulation (EU) 2016 / 425.
The UKCA marking ensures compliance with the essential health and safety
requirements of Regulation (EU) 2016 / 425 as brought into UK law and amended.
Warning ! The end user should carefully read the instruction before using the product (PPE)
Icons indicate the specific sport for which the product is designed to be used : skiing
and snowboarding (EN 1077 : 2007), and / or mountaineering (EN 12492 : 2012). THIS
HELMET IS NOT INTENDED TO BE USED FOR MOTOR SPORTS, OR MOPEDS.
Manufacturing date : Year-Month / Individual serial number
• V. TIME OF OBSOLESCENCE
Personal protective equipment has limited lifespan. For optimum safety, SCOTT recom-
mends replacing your product three (3) years after the purchasing date.
The product may lose its protective properties after heavy impacts or impacts that result
in damages to the product. In such cases, the product must be replaced. SCOTT shall not
be liable for damages relating to the use of products which should have been replaced.
• VI. INSTRUCTIONS FOR SIZING, FIT
Please bear in mind that a trial of the product before purchase is the best way to find the
correct size, which should be chosen from the manufacturer’s size chart. SCOTT Sports SA
shall not accept any complaints arising from the use of an incorrectly fitted product.
ENGLISH - 6

Chat with your Scott Keeper 2 manual using AI

Get instant AI answers from your Scott Keeper 2 manual

Ask anything about the Scott Keeper 2. Answers come from this manual, with the pages they are based on.

Keeper 2 Maintenance Schedule

Remind me when maintenance is due
Every 3 years
Replace the helmet

Replace the product three years after the purchasing date for optimum safety, even if no damage is visible.

After every use
Air dry the helmet

Let your helmet air dry after each use before storing it in a cool, dry place.

Regularly
Inspect for wear and damage

Check straps, stitching, and pads before use. Replace if any damage is found or if the helmet has sustained a severe impact.

As needed
Hand wash the inner lining

Remove the lining by hand and wash with mild soap. Do not machine wash at high temperatures.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Keeper 2?

Yes No

Frequently Asked Questions

A

The helmet is intended for skiing, snowboarding and related mountain activities. It is certified to EN 1077 for alpine skiing/snowboarding; some SCOTT models also meet EN 12492 for mountaineering. It is not designed for motorized vehicles or mopeds.

Is this answer helpful?

A

Measure head circumference and consult the manufacturer’s size chart. Try helmets on before purchase: a correct fit moves minimally when twisted and sits low on the forehead just above the eyebrows. If the helmet shifts significantly, try a different size or adjust the fit system.

Is this answer helpful?

A

Fasten the chin strap securely and tighten so you can still chew and swallow comfortably. Guide the strap’s loose end through the rubber O-ring to prevent loosening. Magnetic or ratchet buckles should click or lock firmly; give a quick tug to verify closure.

Is this answer helpful?

A

Replace the helmet after any severe impact even if it appears undamaged, because energy-absorbing foam may be compromised. For optimum safety, SCOTT recommends replacing helmets three years after purchase or sooner if wear or damage is evident.

Is this answer helpful?

A

Clean with a soft cloth, warm water and mild soap; avoid solvents or petroleum-based cleaners. Remove and hand-wash inner padding. Air dry after use and store in a cool, dry place away from direct sunlight and excessive heat to avoid material degradation.

Is this answer helpful?

A

Only attach accessories if the manufacturer issues a declaration of no objection. As a general rule, helmet-compatible goggles or headlamps should be attached with an elastic band. Unauthorized modifications can compromise safety and void warranty.

Is this answer helpful?

A

No. The helmet reduces the risk of skull and head injuries in covered areas but cannot protect the face, throat, neck, or spinal column. No helmet can prevent all injuries or fatalities in every accident scenario, especially collisions with motor vehicles.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Junior-focused sizing and fit systems (dial-adjustment) for secure, comfortable wear.
  • Complies with EN 1077 safety standards for skiing and snowboarding protection.
  • Lightweight construction with removable, hand-washable inner lining for hygiene.
  • Glove-friendly buckles (magnetic or ratchet) and strap guides positioned for correct fit.
  • Clear care, storage and replacement guidance to preserve protective performance.
VS

Disadvantages

  • Protection limited to areas covered by helmet; face, neck, and spine remain unprotected.
  • Must be replaced after severe impact and recommended every three years—ongoing cost.
  • Not suitable for motorized activities (motor sports, mopeds) or non-intended uses.
  • Incorrect fit or modifications void protection and increase injury risk.
  • Certain cleaning agents and heat exposure can irreversibly damage helmet materials.
M: OA-GPT-5-NAN

Product Specification

Type

Helmet

Visor

no

Sizes

20.08-21.65in (S), 21.65-23.23in (M)

Features

Goggle holder, Adjustment system, Ventilation

M: OA-GPT-54-NAN

Product Description

Scott Keeper 2 Helmet (Junior) Manual

The Scott Keeper 2 Helmet (Junior) is a youth-focused winter sports helmet designed to deliver dependable head protection, comfortable fit, and easy adjustability for skiing and snowboarding. Built on SCOTT’s safety standards and fit systems, it targets young riders who need a lightweight, well-ventilated helmet with secure retention and intuitive adjustment features.

Product overview

This junior helmet follows the same platform principles as SCOTT’s adult lines: certified compliance with EN 1077 (ski/snowboard) standards, careful sizing guidance, and a focus on proper fit and care. The Keeper 2 shares design cues such as low-profile coverage over the forehead, integrated strap guides positioned beneath the earlobes, and a comfortable, removable lining that can be hand-washed. Emphasis is placed on choosing the correct size using the manufacturer’s size chart and testing the fit by attempting gentle head rotations to ensure minimal movement.

Fit and adjustment

The helmet includes an adjustable fit system (dial-based WRAS/WRAS 2 / HALO style) that allows micro-adjustments for a snug but comfortable seal. The chin strap is intended to be secured under the chin and tightened so the helmet remains stable during activity; strap ends are passed through a rubber O-ring to prevent loosening. Magnetic or ratchet buckles (depending on model variants) allow quick fastening and are designed to be glove-friendly for juniors.

Safety and intended use

Designed expressly for skiing, snowboarding and related mountain activities, the Keeper 2 reduces the risk of skull and head injuries for impacts covered by the helmet shell. It does not protect the face, neck, or spine. SCOTT recommends replacing helmets after severe impacts and generally within three years of purchase for optimal protection. The product complies with relevant PPE regulations and bears CE/UKCA markings where applicable.

Care and maintenance

Clean with mild soap and warm water; avoid solvents or petroleum-based cleaners that can degrade materials. Remove and hand-wash inner padding only. Store the helmet dry in a cool place and avoid prolonged exposure to heat or direct sunlight. Inspect regularly for wear, damaged straps, stitching or padding; replace if any compromise is found.

Notes

  • Always fit and test a helmet before use; do not borrow helmets between users.
  • Never modify the helmet or attach accessories unless approved by SCOTT.
  • Replace the helmet after a significant impact even if damage is not visible.
  • Helmets are not suitable for motorized vehicle use or mopeds.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly