Manual.ly Logo

PowerWalker VFI ICR IoT Manual

0.0 · 0 Ratings

PDF manual · 62 Pages

English

M: gpt-5.6-terra
page

/ 62

Loading...
fb13386a04a9b6cf8c719fbd479fc6e33fa7 page 4
An additional AC contactor is used for back feed protection and must comply with
IEC/EN 62040-1 (the creep age and clearance distances shall meet the basic insulation
requirements for pollution degree 2).
Disconnection and overcurrent protection devices shall be provided by others for
permanently connected AC input (Normal AC/Bypass AC) and AC output circuits.
Check that the indications on the rating plate correspond to your AC powered system
and to the actual electrical consumption of all the equipment to be connected to the
system.
For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment
and shall be easily accessible.
Never install the system near liquids or in an excessively damp environment.
Never let a foreign body penetrate inside the system.
Never block the ventilation grates of the system.
Never expose the system to direct sunlight or source of heat.
If the system must be stored prior to installation, storage must be in a dry place.
The admissible storage temperature range is -25°C to +55°C without battery (-15°C to
+40°C with battery).
TN-S/IT/TN-C/TT of electrical supply system may be connected by UPS.
This UPS may be provided with a maximum of 6 extension battery cabinets or equivalent.
Special precautions
The unit is heavy: wear safety shoes and use vacuum lifter preferentially for handling
operations.
All handling operations will require at least two people (unpacking, lifting, installation
in rack system).
Before and after the installation, if the UPS remains de-energized for a long period, the
UPS must be energized for a period of 24 hours, at least once every 6 months (for a
normal storage temperature less than 25°C). This charges the battery, thus avoiding
possible irreversible damage.
During the replacement of the Battery Module, it is imperative to use the same type
and number of elements as the original Battery Module provided with the UPS to
maintain an identical level of performance and safety.
This is a category C3 UPS product. In a residential environment, this product may cause
radio interference, in which case the user may be required to take additional measures.

Chat with your PowerWalker VFI ICR IoT manual using AI

Get instant AI answers from your PowerWalker VFI ICR IoT manual

Ask anything about the PowerWalker VFI ICR IoT. Answers come from this manual, with the pages they are based on.

VFI ICR IoT Maintenance Schedule

Remind me when maintenance is due
Every 6 months
Recharge battery during long-term storage

If the UPS is stored for a long period, energize it for 24 hours at least once every 6 months to charge the battery and avoid irreversible damage.

Every 6 months
Recharge battery if equipment is stored

Connect the UPS to utility power every 6 months to recharge the battery. Allow batteries to charge for 48 hours after long-term storage.

Show in the manual (page 56)
Every 4 years
Replace batteries

Batteries are rated for a 3-5 year service life. Replace batteries at least every 4 years to keep units running at peak efficiency.

Show in the manual (page 56)
As needed
Clean outside of system in dusty environments

Keep the area around the equipment clean and dust free. If the atmosphere is very dusty, clean the outside of the system with a vacuum cleaner.

Show in the manual (page 56)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend VFI ICR IoT?

Yes No

Frequently Asked Questions

A

It is designed to protect connected equipment from power outages, brownouts, surges, voltage sags, high-voltage spikes, electrical noise, frequency fluctuations, switching transients, and harmonic distortion.

Is this answer helpful?

A

The range includes 10 kVA/10 kW, 15 kVA/15 kW, and 20 kVA/20 kW models. Each model has an output power factor of 1, enabling the rated kW output.

Is this answer helpful?

A

Yes. It supports 3-3, 3-1, and 1-1 operating modes. The default configuration is 3-3, and the installation must be configured to match the actual electrical wiring.

Is this answer helpful?

A

Yes. Integrated Ethernet supports IoT monitoring through the WinPower View app. Optional wireless connectivity is available, and Modbus TCP plus optional network and interface cards support wider system integration.

Is this answer helpful?

A

Yes. Long-runtime models support external battery modules. Depending on the model, multiple battery cabinets can be connected to increase available runtime, subject to the stated configuration limits.

Is this answer helpful?

A

Yes. When configured with the parallel function, up to three compatible UPS units can be connected for increased capacity or redundancy. Parallel installation requires correct signal and power cabling.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Online double-conversion design supplies pure sine wave power with zero transfer time to battery operation.
  • Output power factor of 1 provides full usable kW capacity across 10 kVA, 15 kVA, and 20 kVA models.
  • Supports 3-3, 3-1, and 1-1 input/output configurations for flexible deployment.
  • IoT-ready Ethernet, optional Wi-Fi, touch LCD, USB, RS232, and Modbus TCP support monitoring and control.
  • External battery modules and parallel operation of up to three UPS units support longer runtime and redundancy.
VS

Disadvantages

  • Installation, wiring, grounding, and servicing require qualified electrical personnel.
  • High-capacity tower units are heavy and require at least two people for handling.
  • Optional Wi-Fi, smart cards, maintenance bypass equipment, and some parallel features may require extra purchases.
  • Category C3 equipment may cause radio interference in residential environments.
  • Battery life is temperature and usage dependent, with replacement recommended at regular intervals.
M: gpt-5.6-terra

Product Specification

Type

Rackmount

Classification

VFI (On-Line)

Voltage

230 V

Interfaces

USB, serial, LAN

Data line protection

N/A

Charging time

3 hr (90%)

Rack units

2U

Special features

LCD, HID support

M: gpt-5.6-terra

Product Description

BlueWalker PowerWalker VFI ICR IoT UPS/USV - Read, Download & Print Free

The BlueWalker PowerWalker VFI ICR IoT UPS/USV is a professional uninterrupted power supply designed to protect critical equipment from outages, voltage dips, surges, frequency changes, electrical noise, and harmonic distortion. Built for demanding business, IT, industrial, and infrastructure environments, it combines online double-conversion technology with a pure sine wave output for dependable power quality.

Available in 10 kVA, 15 kVA, and 20 kVA capacities, this UPS range delivers an output power factor of 1, allowing connected systems to use the full rated kW capacity. It supports flexible electrical configurations, including 3-3, 3-1, and 1-1 operating modes. This versatility helps organizations adapt the UPS to existing power infrastructure while supporting future changes in installation requirements.

Reliable Power and Battery Flexibility

The VFI design provides zero transfer time between utility and battery operation, helping sensitive loads remain powered during mains disturbances. The UPS can also start without a battery where utility power is available. Intelligent charging, adjustable charging current up to 13 A, battery auto-testing, and low-battery protection support effective battery management.

Models are available with internal batteries or as long-runtime versions for external battery modules. Compatible external battery cabinets can extend backup time, while automatic battery-module detection simplifies configuration. Tower and rack-tower formats provide additional flexibility for floor installations, technical rooms, and 19-inch racks.

Monitoring and Control

A color touch LCD presents operating mode, load level, battery status, measurements, alarms, and event history in a clear interface. The display supports multiple languages and automatic screen rotation for tower or rack deployment. Communication options include USB, RS232, dry contacts, RPO, an intelligent card slot, Ethernet, and optional wireless connectivity.

Integrated IoT connectivity enables remote monitoring through the WinPower View mobile application. Users can view status, receive notifications for important events, and follow warranty-related alerts. Modbus TCP and optional network, Modbus, and AS400 cards help integrate the UPS into broader monitoring and management systems.

Installation and Service Considerations

This is heavy, high-power equipment intended for installation by qualified electrical professionals. Correct grounding, protective devices, adequate ventilation, and suitable cable sizing are essential. The UPS supports optional parallel operation with up to three units for added capacity or redundancy. A maintenance bypass solution is also available for compatible rack installations.

Note: Keep the installation area clean, dry, and well ventilated. Battery servicing, replacement, recycling, and internal repairs should be handled by trained personnel using appropriate safety procedures.

BlueWalker PowerWalker VFI ICR IoT UPS/USV - Read, Download & Print Free offers a strong feature set for organizations seeking scalable online power protection, remote visibility, and flexible deployment options.

M: gpt-5.6-terra

© Copyright 2026 Manual.ly