Manual.ly Logo

PeakTech 3360 Manual

0.0 · 0 Ratings

PDF manual · 162 Pages

English

M: QW-35-FL
page

/ 162

Loading...
eb7c474a8dcd998e10dd65bedc7f9c11946d page 3c
WARNING!
Do not operate your meter until the back cover is in place and fully
closed.
7. Maintenance
Warning:
To avoid electric shock, disconnect the test leads from any source
of voltage before removing the back cover or the battery/fuse door.
Warning:
To avoid electric shock, do not operate your meter until the battery/
fuse door are in place and fastened securely. This multimeter is
designed to provide years of dependable service, if the following
care instructions are performed.
1. Keep the meter dry. If it gets wet, wipe it off.
2. Use and store the meter in normal temperatures. Temperature
extremes can shorten the life of the electronic parts and distort
or melt plastic parts.
3. Handle the meter gently and carefully. Dropping it can damage
the electronic parts or the case.
4. Keep the meter clean. Wipe the case occasionally with a
damp cloth. Do not use chemicals, cleaning solvents or
detergents.
5. Use only fresh batteries or the recommended size and type.
Remove old or weak batteries so they do not leak and damage
the unit.
6. If the meter is to be stored for a long period of time, the
batteries should be removed to prevent damage to the unit.
-59-

Chat with your PeakTech 3360 manual using AI

Get instant AI answers from your PeakTech 3360 manual

Ask anything about the PeakTech 3360. Answers come from this manual, with the pages they are based on.

3360 Maintenance Schedule

As needed
Replace battery when low

Replace the battery as soon as the 'BAT' indicator appears to avoid inaccurate readings and potential electric shock.

Periodically
Clean the device housing

Wipe the cabinet with a damp cloth and mild detergent. Do not use abrasives or solvents.

Before each use
Inspect test leads and probes

Check test leads and probes for faulty insulation, bare wires, or damage before connecting to equipment.

Show in the manual (page 36)
If wet
Dry the meter immediately

Keep the meter dry. If it gets wet, wipe it off immediately to prevent damage.

Show in the manual (page 60)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend 3360?

Yes No

Frequently Asked Questions

A

The main differences lie in the display resolution and advanced features. The P3360 offers a 4 ¾ digit display with 40,000 counts compared to the P3355's 3 ¾ digits (4,000 counts). Additionally, the P3360 includes True RMS measurement, a bar graph display, and the ability to disable auto-power off, which are not present in the P3355.

Is this answer helpful?

A

Yes, the PeakTech 3360 is rated for Overvoltage Category III up to 1000V and Category IV up to 600V. However, always follow safety guidelines, use appropriate test leads with protective caps for CAT IV, and never exceed the maximum input ratings to ensure personal safety and equipment integrity.

Is this answer helpful?

A

First, turn off the meter and disconnect all test leads. Unscrew the battery compartment cover, remove the old 9V battery, and insert a new one ensuring correct polarity. Secure the cover tightly before resuming operation. Always replace batteries promptly when the low battery indicator appears.

Is this answer helpful?

A

Yes, the PeakTech 3360 can measure capacitance ranging from 40 nF up to 40 mF. Ensure the circuit is de-energized and capacitors are fully discharged before connecting the test leads to avoid damaging the meter or receiving inaccurate readings.

Is this answer helpful?

A

Selecting the wrong position, such as measuring current while set to voltage, can blow the internal fuses or damage the meter. Always verify the function switch setting and connect leads to the correct terminals before applying power to the circuit under test.

Is this answer helpful?

A

On the P3360, the backlight can be activated by holding the HOLD button for two seconds but will automatically turn off after 30 seconds to save battery. On the P3355, it also requires holding the backlight button. You can turn it off manually by holding the button again.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • True RMS technology ensures accurate readings on complex waveforms
  • High resolution 40,000 count display with bar graph visualization
  • CAT III 1000V safety rating suitable for industrial applications
  • Includes Min/Max/Peak hold functions for detailed analysis
  • Backlit LCD screen enhances visibility in low light conditions
VS

Disadvantages

  • Auto-power off feature cannot be disabled on the P3355 model
  • Requires specific fuse replacements which may need ordering
  • Test leads do not have protective caps included for CAT IV use
  • Temperature probe accuracy depends on external sensor quality
  • No built-in Bluetooth or data logging capabilities mentioned
M: QW-35-FL

Product Specification

Measurement range

max. 10A, max. 1000V, max. 40MΩ

Package contents

Case, test leads

M: QW-35-FL

Product Description

PeakTech 3360 True RMS Digital Multimeter Review

The PeakTech 3360 True RMS Digital Multimeter stands out as a versatile tool for professionals and hobbyists alike. This device is designed to deliver precise measurements across a wide range of electrical parameters, making it an essential addition to any toolkit. Unlike standard multimeters, the P3360 features True RMS technology, which ensures accurate readings even when dealing with complex waveforms and non-linear loads. This capability is crucial for modern electronics where power quality can vary significantly.

Equipped with a high-resolution 4 ¾-digit LCD display, the PeakTech 3360 offers exceptional clarity. The screen includes a 42-segment bar graph that provides visual feedback on changing values, allowing users to spot trends instantly. Additional features like automatic ranging simplify operations, while manual range selection offers control for experienced technicians. The inclusion of a backlight ensures readability in dimly lit environments, a common challenge during field work.

Safety is paramount in electrical testing, and this meter adheres to strict international standards. It supports Overvoltage Category III up to 1000V, ensuring reliable performance in industrial settings. The robust design includes protection against overloads in all measurement ranges, safeguarding both the user and the instrument. With functions covering voltage, current, resistance, capacitance, frequency, duty cycle, diode testing, and temperature, the P3360 is a comprehensive solution for diverse diagnostic needs.

Key Highlights

  • True RMS Measurement: Accurately measures AC signals regardless of waveform shape.
  • High Resolution Display: 40,000 counts with a bargraph for real-time data visualization.
  • Advanced Safety Ratings: CAT III 1000V and CAT IV 600V compliance for safe operation.
  • Comprehensive Functions: Includes Min/Max/Peak hold and relative measurement modes.
  • User-Friendly Interface: Auto-ranging option combined with manual controls for flexibility.

Important Notes

Always ensure test leads are properly connected before taking measurements. Avoid measuring voltages above the rated limits to prevent damage. Replace fuses only with specified ratings to maintain safety integrity.

M: QW-35-FL

© Copyright 2026 Manual.ly