Manual.ly Logo

PeakTech 3335 Manual

0.0 · 0 Ratings

PDF manual · 120 Pages

English

M: QW-35-FL
page

/ 120

Loading...
3c41e96d0f2173c993762442a3f89ebe0194 page 2d
44
7. Care and Maintenance
7.1. Installing the battery
Your meter requires a 9 V battery for power. The battery symbol appears
when the battery voltage drops to the certain limits. For proper operation,
replace the battery as soon as possible. Continued use with a low battery
will lead to abnormal readings.
Warning!
To avoid electric shock, disconnect both test leads from equipment before
you remove or install the battery.
Follow these steps to install the battery:
1. Turn off the power and disconnect the two test leads.
2. Remove the screws to open the back cover.
3. Remove the battery.
4. Place the battery into the insulation capsule.
5. Replace the back cover and secure it with the screws.
WARNING! Do not operate the meter until you replace the battery and
close the battery compartment cover.
Notes:
Never leave a weak or dead battery in your meter. Even a leakproof
battery can leak damaging chemicals. When you are not going to use your
meter for a week or more, remove the battery.

Chat with your PeakTech 3335 manual using AI

Get instant AI answers from your PeakTech 3335 manual

Ask anything about the PeakTech 3335. Answers come from this manual, with the pages they are based on.

3335 Maintenance Schedule

As needed
Replace the battery when indicator appears

Replace the 9V battery as soon as the 'BAT' symbol lights up to ensure accurate readings and prevent damage from leakage.

Show in the manual (page 45)
Periodically
Clean the cabinet with a damp cloth

Wipe the device with a damp, lint-free cloth and mild detergent. Do not use abrasives or solvents, and keep liquid out of the interior.

Show in the manual (page 28)
After inactivity
Remove battery during long storage

If the meter will not be used for more than a week, remove the battery to prevent potential chemical leaks and damage.

Show in the manual (page 45)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend 3335?

Yes No

Frequently Asked Questions

A

Turn off power and disconnect leads. Remove screws from the back cover. Open the compartment. Remove the old 9 volt battery and insert a new one. Close the cover and secure with screws. Do not operate with the cover open.

Is this answer helpful?

A

The device complies with CAT III 600V ratings and Pollution Degree 2 standards. This ensures protection against high voltage transients and meets EU directives for electromagnetic compatibility and low voltage equipment safety.

Is this answer helpful?

A

No, you must connect the meter in series with the circuit to measure current properly. Connecting it directly across a voltage source in a parallel configuration can damage the meter or blow the internal fuse.

Is this answer helpful?

A

Wipe the casing with a damp soft cloth. Use mild cleaning agents only. Do not use abrasive cleaners. Ensure no liquid enters the internal components or enters the ports to prevent short circuits and damage.

Is this answer helpful?

A

Overload protection safeguards the internal circuitry from accidental spikes above limits. It includes fuses on current inputs and voltage ranges to prevent severe damage to the internal electronics during misuse.

Is this answer helpful?

A

Yes, the device features automatic power off after fifteen minutes of inactivity. This conserves battery life. A manual on-off switch allows users to start and stop operation as needed.

Is this answer helpful?

A

Set the function selector to the diode test mode. Connect the red probe to the anode and black to the cathode. The display will show the forward voltage drop. Reversing the polarity should show an overrange indication.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Robust housing suitable for daily service technician tasks and workshops.
  • Clear 3 ½ digit LCD display with backlight for readability in low light environments.
  • Comprehensive safety protections including CAT III 600V ratings for high voltage transients.
  • Automatic power off feature conserves battery life after fifteen minutes of idling.
  • Includes data hold function for freezing readings for easier transcription later.
VS

Disadvantages

  • Max resolution limited to 3 ½ digits compared to higher digit professional models.
  • Requires opening casing with screws for battery or fuse replacement by technician.
  • Voltage measurement limited to 600V max, not suitable for industrial high voltage applications.
  • Temperature accuracy relies on external Type-K thermocouple sensor included in kit.
  • Must avoid operating near strong magnetic fields to prevent measurement errors.
M: QW-35-FL

Product Specification

Measurement range

Max. 10A, Max. 600V, Max. 20MΩ

Package contents

Case, Test leads

M: QW-35-FL

Product Description

Overview

The PeakTech 3335 Digital Multimeter stands as a rugged solution for technicians requiring reliable measurements. Designed for the service everyday, this unit offers robust housing that withstands daily use. It features a clear 3 ½ digit LCD display for readability in low light. Users appreciate the data hold function, allowing them to freeze readings for transcription. The device complies with strict safety standards including CAT III 600V ratings, ensuring protection against high voltage transients.

Features

Accurate measurements across multiple domains make this tool indispensable. It handles DC and AC voltage, current up to 10 amps, resistance, frequency, and capacitance. Temperature readings are possible with the included thermocouple. Safety is paramount, so all users must understand the PeakTech 3335 Digital Multimeter Manual guidelines before starting work. Incorrect usage can damage equipment or cause injury. The multimeter includes an audible beeper for continuity checks. Automatic power off conserves battery life after fifteen minutes. Overload protection safeguards the internal circuitry from accidental spikes.

Maintenance

Maintenance involves standard procedures to keep performance optimal. Replace the 9 volt battery when the low indicator appears. Keep the unit dry and avoid extreme temperatures during storage. Clean the casing with a soft cloth. Do not open the device unless you are a qualified technician. This ensures the warranty remains valid. The compact size allows for easy transport between job sites. Whether working on appliances or electronics, this meter delivers consistent results. Always check test leads for damage.

Important Note

To ensure efficiency, always start on the highest range if values are unknown. The function selector switch makes changing modes simple. Each input jack serves a specific purpose, such as the common terminal for black probes. Current measurement requires breaking the circuit to insert the meter in series. Resistance measurements are only valid on de-energized components. Frequency limits peak at 20 kHz for accurate signal analysis. The device comes with a stand for hands free operation. Warranty covers factory calibration defects.

M: QW-35-FL

© Copyright 2026 Manual.ly