Manual.ly Logo

PeakTech 2795 Manual

0.0 · 0 Ratings

PDF manual · 28 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 28

Loading...
dfd7cd148ca68a4c8abdb278dfc6ad89477e page d
12
9. Messen von geringen Umdrehungsge-
schwindigkeiten
Beim Messen von geringen Umdrehungsgeschwindigkeiten wird
zur Gewährleistung von schnellen Messzeiten und hoher
Auflösung das Anbringen von mehreren Reflektionsmarken
empfohlen. Zum Erhalt der Umdrehungsgeschwindigkeit den
angezeigten Wert durch die Zahl der Reflektionsmarken teilen.
10. Austauschen der Batterien
Bei ungenügender Batteriespannung leuchtet in der LCD-Anzeige
das Batteriesymbol auf. Die Batterien sind dann baldmöglichst
auszuwechseln. Dazu wie beschrieben vorgehen:
* Schraube des Batteriefachdeckels lösen
* Batteriefachdeckel vom Batteriefach abziehen und
verbrauchte Batterie aus dem Batteriefach entfernen.
* Neue Batterie in das Batteriefach einlegen. Beim Einlegen auf
korrekte Polarität achten. Falsch eingelegte Batterien können
die internen Schaltkreise des Gerätes zerstören.
* 9 V – Batterie (Neda 1604)
* Batteriefachdeckel wieder auflegen und mit Schraube
befestigen.
Bei längerem Nichtgebrauch des Gerätes Batterien aus dem
Batteriefach entfernen.

Chat with your PeakTech 2795 manual using AI

Get instant AI answers from your PeakTech 2795 manual

Ask anything about the PeakTech 2795. Answers come from this manual, with the pages they are based on.

2795 Maintenance Schedule

Remind me when maintenance is due
Yearly
Calibrate the unit

Re-calibration is recommended after one year of operation to maintain accuracy.

Show in the manual (page 28)
Regularly
Clean the housing

Wipe the cabinet regularly with a damp cloth and mild detergent. Do not use abrasives or solvents.

When indicated
Replace battery

Replace the 9V battery as soon as the BAT symbol appears on the display to ensure accurate measurements.

Show in the manual (page 13)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend 2795?

Yes No

Frequently Asked Questions

A

Yes, it measures surface speed in meters per minute, inches per minute, feet per minute, and yards per minute using the contact wheel.

Is this answer helpful?

A

It stores up to 10 individual measurement values including maximum, minimum, and average data points for analysis.

Is this answer helpful?

A

Yes, it uses a standard nine-volt battery which is easy to replace when the low battery icon appears on the screen.

Is this answer helpful?

A

The photo mode reaches 199,999 RPM while the contact mode operates between 2.0 and 19,999 RPM depending on the attachment used.

Is this answer helpful?

A

No, it is a Class 2 laser. Never point it at people or animals or look directly into the beam to prevent eye injury.

Is this answer helpful?

A

No, this unit is designed for indoor applications only and should be kept away from moisture and direct sunlight.

Is this answer helpful?

A

Use only a damp, soft cloth with mild soap. Do not use solvents or let liquid enter the device casing.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • High accuracy with resolution up to 0.05% plus one digit for critical industrial applications.
  • Large LCD display with backlight ensures easy reading in low light or shadowed workshop conditions.
  • Non-contact laser measurement allows safe speed checks on moving parts without physical interference.
  • Built-in memory stores ten datasets including max, min, and average values for later review.
  • Wide RPM range covers both high-speed motors and low-speed machinery operations accurately.
VS

Disadvantages

  • Laser Class 2 requires strict eye safety protocols preventing use near gas explosions or reflective surfaces.
  • Indoor use restriction limits applicability in outdoor environments subject to water or direct sunlight.
  • Only accepts a standard nine-volt battery which may need frequent replacement depending on usage frequency.
  • Contact measurement requires specific adapters included to ensure readings are not falsified by surface textures.
  • No USB connectivity limits data transfer to manual recording from the internal memory storage only.
M: qwen/qwen3.5-flash-20260224

Product Description

Exploring the PeakTech 2795 Tachometer

The PeakTech 2795 Tachometer stands as a robust solution for industrial and maintenance professionals requiring precise speed measurements in demanding environments. This versatile instrument allows users to perform both contact and non-contact rotation measurements effortlessly. Equipped with an integrated laser pointer, aiming becomes faster and more accurate, ensuring you hit the target spot on rotating machinery without guessing. Its design supports rapid setup for immediate results in the field. The digital LCD screen features a high-visibility backlight, making it readable even in dim workshop environments where shadow coverage is common. This PeakTech 2795 Tachometer is designed for longevity.

Performance is a key focus for this device. It offers a wide measuring range extending up to 199,999 RPM for photo mode and 19,999 RPM for contact mode. Whether you are monitoring motors, fans, or shafts, the resolution adjusts automatically for clarity. It also handles surface speed measurements in meters per minute or imperial units. The device stores up to ten individual datasets for review later. Each entry captures maximum, minimum, and average values, aiding in trend analysis and compliance checks without needing to write anything down during operation. You can recall these values instantly by pressing the memory button to compare current performance against past records.

Battery life is manageable with a standard nine-volt cell, indicated clearly by an on-screen icon when low. Safety cannot be overlooked. The unit includes a Class 2 laser which requires careful handling to avoid eye damage. It is strictly for indoor application and protects against electromagnetic interference to ensure stable readings during sensitive tests. The casing is durable but should be kept away from vibration or moisture to prevent internal damage. This tool simplifies complex diagnostics into simple button presses. It comes with a carrying case, adhesive tape, and adapters for different measurement needs. Maintenance is straightforward with regular cleaning using damp cloths. For professionals valuing speed and accuracy, this PeakTech model reduces downtime by providing immediate feedback on operational speeds across various mechanical setups. It includes adapters for specific tasks.

Regular calibration is recommended after three years to maintain factory specifications. Ensure you replace batteries immediately if the symbol appears to prevent incorrect data. Do not use near explosive gases due to the laser spark risk. It weighs just 160 grams, ensuring portability during field inspections without adding weight to your belt pack. This comprehensive package makes it an essential addition to any technical toolkit for machinery monitoring.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly