Manual.ly Logo

PeakTech 1660 Manual

0.0 · 0 Ratings

PDF manual · 60 Pages

English

M: QW-35-FL
page

/ 60

Loading...
e6fcb026bb13268c98a075d922c35b51240e page 1e
29
1. Safety Precautions
This product complies with the requirements of the following
directives of the European Union for CE conformity: 2014/30/EU
(electromagnetic compatibility), 2014/35/EU (low voltage),
2011/65/EU (RoHS).
Overvoltage category III 1000V; pollution degree 2.
CAT I: For signal level, telecommunication, electronic with
small transient over voltage
CAT II: For local level, appliances, main wall outlets, portable
equipment
CAT III: Distribution level, fixed installation, with smaller
transient overvoltages than CAT IV.
CAT IV: Units and installations, which are supplied overhead
lines, which are stand in a risk of persuade of a
lightning, i.e. main-switches on current input,
overvoltage-diverter, current use counter.
To ensure safe operation of the equipment and eliminate the
danger of serious injury due to short-circuits (arcing), the
following safety precautions must be observed.
Damages resulting from failure to observe these safety
precautions are exempt from any legal claims whatever.
* Do not use this instrument for high-energy industrial
installation measurement.
* Do not exceed the maximum permissible input ratings
(danger of serious injury and/or destruction of the
equipment).
* The meter is designed to withstand the stated max voltages.
If it is not possible to exclude without that impulses,
transients, disturbance or for other reasons, these voltages
are exceeded a suitable prescale (10:1) must be used.
* Disconnect test leads or probe from the measuring circuit
before switching modes or functions.
* To avoid electric shock, disconnect power to the unit under
test and discharge all capacitors before taking any
resistance measurements.

Chat with your PeakTech 1660 manual using AI

Get instant AI answers from your PeakTech 1660 manual

Ask anything about the PeakTech 1660. Answers come from this manual, with the pages they are based on.

1660 Maintenance Schedule

Remind me when maintenance is due
Yearly
Recalibrate the meter

The manual recommends repeating the factory calibration after 1 year to maintain measurement accuracy.

Show in the manual (page 29)
As needed
Replace the battery

Replace the 9V battery as soon as the battery symbol appears on the display to ensure accurate readings and prevent damage.

Before use
Inspect device and test leads

Check the instrument, test leads, and accessories for damage, cracks, or bare wires before making measurements.

Periodically
Clean the housing

Wipe the cabinet with a soft, dry cloth or damp cloth with mild detergent. Do not use solvents or abrasives.

During storage
Remove battery for long-term storage

If the device will not be used for a long period, remove the battery from the compartment to prevent leakage.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend 1660?

Yes No

Frequently Asked Questions

A

The meter can measure up to 1000 amperes of AC current using the clamp jaw.

Is this answer helpful?

A

It is rated for Overvoltage Category III up to 1000 volts, meeting strict safety standards.

Is this answer helpful?

A

Connect the included USB interface cable to the meter and your computer, then use the provided P1660 software.

Is this answer helpful?

A

Yes, the device calculates power factor and phase angle in addition to power measurements.

Is this answer helpful?

A

It features a 3 5/6-digit LCD with a 42-segment bar graph and backlight.

Is this answer helpful?

A

It is factory calibrated, and calibration after one year is recommended for accuracy.

Is this answer helpful?

A

The provided text focuses on AC measurements and does not explicitly list DC current capabilities.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • True RMS accuracy for non-sinusoidal waves
  • Measures up to 1000 A AC current
  • Includes 99 internal memory slots
  • USB connectivity for PC data logging
  • Three-phase power analysis supported
VS

Disadvantages

  • Designed for indoor use only
  • Requires nine-volt battery replacement
  • No explicit DC measurement specifications
  • Bulkier than basic multimeters
  • Complex setup for beginners in 3-phase
M: QW-35-FL

Product Specification

Measuring Range

max. 1,000 A, max. 1,000 V

Package Contents

Case, Test leads

M: QW-35-FL

Product Description

PeakTech 1660 Overview

The PeakTech 1660 True RMS Current Clamp Multimeter is a robust tool designed for professionals working with three-phase power systems. This versatile instrument simplifies complex electrical measurements by combining multiple functions into one handheld device. With a high-resolution display featuring both digital readouts and a bar graph, users get immediate visual feedback on their measurements. The device supports True RMS technology, ensuring accurate readings even when dealing with non-sinusoidal waveforms common in modern industrial environments. This capability is vital for diagnosing harmonics or distorted power signals without manual calculation.

Safety and Specifications

Safety is a paramount concern with this equipment. Rated for Overvoltage Category III up to 1000V, it meets strict European safety standards for reliability. The meter allows for measuring active, apparent, and reactive power, making it essential for energy analysis and efficiency audits. Users can monitor power factors and phase angles to optimize system performance. The internal memory capacity stores up to ninety-nine measurement results, allowing technicians to collect data without constant writing. Additionally, the USB connectivity enables direct data transfer to a computer for further analysis using the included software. This integration facilitates long-term tracking and reporting for facility managers.

Usage and Features

Measuring AC current up to 1000 amperes is straightforward thanks to the large jaw opening. The unit also handles voltages up to 750 volts AC. For those maintaining three-phase networks, specific buttons facilitate switching between Phase 1, 2, or 3, or calculating the total sum. A non-contact voltage detector adds an extra layer of safety before touching wires. The LCD screen includes a backlight for low-light conditions, and the auto-power-off feature conserves battery life. While it is primarily designed for indoor applications, its durability supports rigorous daily testing routines. Technicians appreciate the clarity of the interface, which minimizes reading errors during critical operations. The package includes essential accessories like test leads and a carrying case, ensuring readiness for any job site. Battery life is maintained through a standard nine-volt source, making replacements easy when needed.

Conclusion

The device also tracks energy consumption over time, measuring kilowatt-hours accurately over a twenty-four-hour period. It features clear warning indicators for battery status and overload conditions to prevent damage during use. Dimensions allow for portable handling despite the substantial weight, fitting into standard tool belts. Calibration is verified at the factory, ensuring consistent performance right out of the box. Regular maintenance involves simple cleaning and battery replacement, keeping the unit operational for years. This multimeter balances high-end functionality with user-friendly design for electrical engineers and maintenance staff alike.

M: QW-35-FL

© Copyright 2026 Manual.ly