Manual.ly Logo

Oase ProMax ClearDrain 6000 Manual

0.0 · 0 Ratings

PDF manual · 157 Pages

English

M: QW-35-FL
page

/ 157

Loading...
4952e998c36eb35a5ca7701b96287d853cc0 page f
DE
EN
FR
NL
ES
PT
IT
DA
NO
SV
FI
HU
PL
CS
SK
SL
HR
RO
BG
UK
RU
CN
15
REMEDY OF FAULTS
Malfunction
Cause
Remedy
Pump does not start.
Power supply interrupted
Check the fuse and electri-
cal plug connections.
Pump switches off after a
short running period.
Overload protection has
switched the pump off due
to overheating.
• Clean the intake and
pressure hose.
• Allow the pump to cool
down.
The pump is running but is
not delivering, or the deliv-
ered quantity is insufficient
Pressure hose blocked
• Route the pressure hose
without kinks.
• Check the outlet and
clean if necessary
Intake blocked
• Clean the intake
Air in the pressure hose
• Expel the air from the
pressure hose.
If applicable:
Non-return valve incorrectly
fitted in the pressure hose
or clogged
• Correctly fit the non-re-
turn valve.
• Clean the non-return
valve.
Impeller defective or worn
Contact OASE
• The impeller may only
be replaced by the
OASE Service.
MAINTENANCE AND CLEANING
WARNING
Dangerous electrical voltage!
• Switch off the mains voltage of all units
before reaching into the water.
• Switch off the mains voltage of the unit
before carrying out any work.
If the mains voltage is switched on during
cleaning and maintenance work, there is
danger to life due to electrocution.
NOTE
Recommendation on regular cleaning:
• Clean the unit as required but at least
twice per year.
• Do not use aggressive cleaning agents
or chemical solutions as they could at-
tack the housing or impair the function
of the unit.
• Recommended cleaning agent for re-
moving stubborn limescale deposits:
– Pump cleaning agent PumpClean
from OASE.
– Vinegar- and chlorine-free household
cleaning agent.
• After cleaning, thoroughly rinse all parts
in clean water.
WEAR PARTS
Wear parts are excluded from the war-
ranty.
The following components are wear parts
and may only be replaced by the OASE
Service.
• Impeller

Chat with your Oase ProMax ClearDrain 6000 manual using AI

Get instant AI answers from your Oase ProMax ClearDrain 6000 manual

Ask anything about the Oase ProMax ClearDrain 6000. Answers come from this manual, with the pages they are based on.

ProMax ClearDrain 6000 Maintenance Schedule

Remind me when maintenance is due
Semiannual
Clean the pump unit

Clean the unit as required but at least twice per year. Use PumpClean or vinegar/chlorine-free agents for limescale. Rinse thoroughly with clean water.

Show in the manual (page 15)
Yearly (Seasonal)
Store unit frost-free before winter

If frost is expected, drain hoses and pipes, clean the unit, check for damage, and store it in a dry, frost-free place.

Show in the manual (page 16)
After each use
Rinse the pump after use

Rinse out the pump with clean water after every use to prevent clogging and residue buildup.

Show in the manual (page 14)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend ProMax ClearDrain 6000?

Yes No

Frequently Asked Questions

A

The Oase ProMax ClearDrain 6000 is designed to pump water containing solid particles with a maximum grain size of 5 millimeters.

Is this answer helpful?

A

No, this pump is not intended for long-term operation such as continuous water circulation in a pond. It is best suited for draining or intermittent use.

Is this answer helpful?

A

No, the connection cable cannot be replaced. If the cable is damaged, the entire unit must be disposed of and replaced for safety reasons.

Is this answer helpful?

A

It is recommended to clean the pump as needed, but at least twice a year, using non-aggressive cleaning agents like vinegar-based solutions or specialized pump cleaners.

Is this answer helpful?

A

The pump has a maximum immersion depth of 7 meters, making it suitable for deep wells or large containers.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High flow rate of 6000 liters per hour for rapid drainage
  • Automatic float switch simplifies operation without manual intervention
  • Can handle water with solid particles up to 5 mm in diameter
  • Adjustable handle allows for versatile installation angles
  • IPX8 protection rating ensures safe operation under deep immersion
VS

Disadvantages

  • Not suitable for saltwater or drinking water applications
  • Cannot be used for continuous long-term pond recirculation
  • Damaged power cable cannot be replaced and requires disposal of the unit
  • Impeller is a wear part requiring professional service for replacement
  • Manual mode carries a risk of dry running if not monitored closely
M: QW-35-FL

Product Specification

Power

220W

Flow rate

1585.03 gph

Head height

19.69 ft

Submersion depth

22.97 ft

Pressure

8.7 psi

Pressure connection

1 1/4"

Features

without tank, IPX8

Cable length

32.81 ft

Weight

10.58 lbs

M: QW-35-FL

Product Description

Discover the Power of the Oase ProMax ClearDrain 6000

The Oase ProMax ClearDrain 6000 Electric Clear Water Submersible Pump is a robust solution designed for efficient water management in residential and light commercial settings. This submersible pump excels at moving clear water, rainwater, or water containing small particles up to 5 mm in size. Whether you need to drain basins, irrigate gardens, empty cisterns, or extract water from wells, this unit delivers reliable performance with a maximum flow rate of 6000 liters per hour.

Designed with user safety and ease of use in mind, the pump features an adjustable handle that allows for flexible positioning. The integrated float switch enables automatic operation, turning the pump on when water levels rise and off when they drop. For specific tasks requiring constant drainage, a manual mode is available, though users must be cautious to prevent dry running. The device is built with an IPX8 protection rating, ensuring it can withstand immersion depths of up to 7 meters.

Installation is straightforward thanks to the stepped hose adapter which accommodates various hose diameters, ensuring optimal flow rates. However, the pump is strictly intended for clear water applications and should never be used with saltwater, drinking water, or dirty waste water. It is also not suitable for continuous long-term circulation in ponds. Regular maintenance, including cleaning twice a year, is recommended to extend the lifespan of the impeller and other components. Always ensure the power supply matches the technical data found on the type plate before connecting the unit.

M: QW-35-FL

© Copyright 2026 Manual.ly