Manual.ly Logo

Oase BioPress 4000 Manual

0.0 · 0 Ratings

PDF manual · 144 Pages

English

M: OA-GPT-54-NAN
page

/ 144

Loading...
2b16a10290abe0a1ef3a8f7f9bc2834754cc page b
- DE -
11
Lagern/Überwintern
Bei Wassertemperaturen unter 8 °C oder spätestens bei zu erwartendem Frost müssen Sie das Gerät außer Betrieb
nehmen.
Das Gerät entleeren, eine gründliche Reinigung durchführen und auf Schäden überprüfen.
Alle Filtermedien entfernen und reinigen, trocken und frostfrei lagern.
Der Aufbewahrungsort muss für Kinder unzugänglich sein.
Decken Sie den Filterbehälter so ab, dass kein Regenwasser eindringen kann.
Entleeren Sie sämtliche Schläuche, Rohrleitungen und Anschlüsse soweit wie möglich.
Verschleißteile
Die UVC-Lampe, das Quarzglas und die Filtermedien sind Verschleißteile und unterliegen nicht der Gewährleistung.
Ersatzteile
Mit Originalteilen von OASE bleibt das Gerät sicher und ar-
beitet weiterhin zuverlässig.
Ersatzteilzeichnungen und Ersatzteile finden Sie auf unse-
rer Internetseite.
www.oase-livingwater.com/ersatzteile
Entsorgung
Dieses Gerät darf nicht als Hausmüll entsorgt werden! Nutzen Sie bitte das dafür vorgesehene Rücknahme-
system. Machen Sie das Gerät vorher durch Abschneiden der Kabel unbrauchbar.
Entsorgen Sie die UVC-Lampe über das dafür vorgesehene Rücknahmesystem.
Störungsbeseitigung
Störung Ursache
A
bhilfe
Das Gerät erbringt keine zufriedenstellende
Leistung
Gerät noch nicht lange in Betrieb Die vollständige biologische Reinigungswir-
kung wird erst nach einigen Wochen erreicht
Wasser ist extrem verschmutzt Algen und Blätter aus dem Teich entfernen,
Wasser tauschen
Fisch- und Tierbestand zu hoch Richtwert: ca. 60 cm Fischlänge auf 1 m³
Teichwasser
Filtermedien sind verschmutzt Filtermedien reinigen
Quarzglasrohr ist verschmutzt UVC ausbauen und Quarzglas reinigen
UVC-Lampe hat keine Leistung mehr Die Lampe muss nach 8.000 Betriebsstunden
erneuert werden
Anzeige UVC-Lampe leuchtet nicht Netzstecker vom UVC nicht angeschlossen Netzstecker vom UVC anschließen
UVC-Lampe defekt UVC-Lampe austauschen
Anschluss defekt Elektrischen Anschluss überprüfen
UVC überhitzt Nach Abkühlung automatische Einschaltung
vom UVC
Kein Wasseraustritt aus Teicheinlauf Netzstecker der Pumpe nicht angeschlossen Netzstecker der Pumpe anschließen
Teicheinlauf verstopft Teicheinlauf reinigen
Filterbehälter/Pumpengehäuse verstopft Filterbehälter/Pumpengehäuse reinigen

Chat with your Oase BioPress 4000 manual using AI

Get instant AI answers from your Oase BioPress 4000 manual

Ask anything about the Oase BioPress 4000. Answers come from this manual, with the pages they are based on.

BioPress 4000 Maintenance Schedule

Remind me when maintenance is due
Monthly
Clean filter media

Clean filters every four weeks or when dirty water returns to the pond. Perform quick cleaning first.

Every 8,000 hours
Replace UVC lamp

Replace the UVC lamp after approximately 8,000 operating hours for optimum filter performance.

Show in the manual (page 10)
Annually
Winterize and store unit

At water temperatures below 8 C or before frost, drain unit, clean thoroughly, and store filters dry and frost-free.

Show in the manual (page 11)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend BioPress 4000?

Yes No

Frequently Asked Questions

A

It is used to mechanically and biologically clean garden pond water. The built-in UVC unit also helps reduce algae and bacteria, supporting clearer water and a healthier pond environment.

Is this answer helpful?

A

It starts working right away, but the full biological cleaning effect takes several weeks to develop. Better results appear as beneficial bacteria establish themselves in the filter media.

Is this answer helpful?

A

Routine cleaning is recommended about every four weeks, or sooner if dirty water returns to the pond. A quick-clean cycle can handle lighter buildup before a full cleaning is needed.

Is this answer helpful?

A

No. It must never be operated without water flow. Running it dry can damage the system and reduce safety and performance.

Is this answer helpful?

A

The lamp is typically replaced after about 8,000 operating hours. If water clarity drops or the lamp no longer works, replacement may be needed sooner.

Is this answer helpful?

A

Drain and clean it thoroughly, remove and dry the filter media, and store all parts in a frost-free place. It should be taken out of service when water temperatures fall below 8°C or frost is expected.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Combines mechanical, biological, and UVC filtration for broader water-cleaning support.
  • Quick-clean function makes routine maintenance faster and less disruptive.
  • Compact pressure-filter design fits well in small to medium garden ponds.
  • Transparent outlet detail helps users monitor cleaning performance more easily.
VS

Disadvantages

  • Full biological performance develops gradually, especially after a new installation.
  • Requires regular cleaning and occasional lamp replacement to stay effective.
  • Must be installed with care, including distance, pressure, and flow limits.
  • Not suitable for dry running, harsh chemicals, or frozen-season operation.
M: OA-GPT-54-NAN

Product Specification

Power

25W

Flow rate

396.26 gal/h

Pond volume

max. 1056.69 gal, max. 528.34 gal (with fish stock)

Cable length

32.81 ft

Scope of delivery

14.76 ft 3/4" hose

M: OA-GPT-54-NAN

Product Description

Oase BioPress Set 4000 Pond Filter Set Manual: A Practical Guide to Clearer Pond Water

The Oase BioPress Set 4000 Pond Filter Set is built for pond owners who want cleaner water, healthier fish, and less visible debris without making pond care complicated. Designed for mechanical and biological filtration, this system combines pressure-filter performance with UVC support to help reduce algae, bacteria, and suspended dirt in a compact setup.

What makes this pond filter set stand out is its balanced approach. The filter media trap larger particles first, while the biological stage supports the natural breakdown of waste over time. The integrated UVC clarifying unit adds another layer of protection by targeting green water and limiting microbial growth. For new pond setups, this means the water may not become crystal clear overnight, but steady improvement is part of the design.

The Oase BioPress Set 4000 Pond Filter Set Manual emphasizes correct installation, safe operation, and regular maintenance. Placement matters: the unit should stay at least 2 meters from the water, protected from flooding and direct sun. It also needs proper water flow, a pressure limit of 0.2 bar, and careful hose connections to keep performance stable. These rules are less about complexity and more about protecting the system and extending its service life.

Cleaning is straightforward when done regularly. The quick-clean function helps flush out trapped dirt without a full teardown, while deeper maintenance lets you clean the foam filters, housing, and quartz glass when needed. The UVC lamp is a wear part, typically replaced after about 8,000 hours, and the system performs best during warmer months when beneficial bacteria are more active.

Overall, this filter set is a solid choice for smaller ornamental ponds that need dependable filtration with a manageable maintenance routine. It is especially appealing to pond keepers who want a proven, practical solution rather than a highly technical system.

Notes

  • Use only with clean water and proper flow.
  • Clean filters regularly to prevent clogging and leaks.
  • Store dry and frost-free before winter.
  • Replace wear parts with original OASE components for best results.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly