Manual.ly Logo

Oase BioPress 4000 Manual

0.0 · 0 Ratings

PDF manual · 144 Pages

English

M: OA-GPT-54-NAN
page

/ 144

Loading...
2b16a10290abe0a1ef3a8f7f9bc2834754cc page a
- DE -
10
Quarzglas reinigen / UVC-Lampe ersetzen
VORSICHT
Die ultraviolette Strahlung der UVC-Lampe kann Augen oder Haut verbrennen.
UVC-Lampe niemals außerhalb des Gehäuses betreiben.
UVC-Lampe niemals in einem defekten Gehäuse betreiben.
VORSICHT
Quarzglas und UVC-Lampe können zerbrechen und Schnittverletzungen verursachen.
Vorsichtig mit Quarzglas und UVC-Lampe umgehen.
HINWEIS
Aus Sicherheitsgründen lässt sich die UVC-Lampe erst einschalten, wenn der Gerätekopf ordnungsgemäß in das Ge-
häuse eingebaut ist.
So gehen Sie vor:
F
UVC-Vorklärgerät öffnen
Abdeckkappe vom UVC-Vorklärgerät abnehmen.
UVC-Vorklärgerät gegen den Uhrzeigersinn bis zum Anschlag drehen (Bajonettverschluss) und mitsamt O-Ring vor-
sichtig aus dem Deckel des Filters ziehen (1).
Die Blechschraube soweit lösen, bis die Schraubenspitze im Gehäuse der Klemmschraube versenkt ist (2).
Klemmschraube gegen den Uhrzeigersinn abschrauben (3).
Quarzglas mit O-Ring mit einer leichten Drehbewegung nach vorne abziehen (4).
Quarzglas und O-Ring auf Beschädigungen prüfen und gegebenenfalls ersetzen.
Quarzglas von außen mit einem feuchten Tuch reinigen.
UVC-Lampe austauschen
Wichtig: Nur Lampen verwenden, deren Bezeichnung und Leistungsangabe mit den Angaben auf dem Typenschild
übereinstimmen.
Für eine optimale Filterleistung sollten Sie die UVC-Lampe nach ca. 8.000 Betriebsstunden wechseln.
UVC-Lampe heraus ziehen und ersetzen.
UVC-Vorklärgerät zusammenbauen
Das Quarzglas mit O-Ring bis zum Anschlag in den Gerätekopf einsetzen (6).
Der O-Ring muss in den Spalt zwischen Gerätekopf und Quarzglas gedrückt werden.
Die Klemmschraube im Uhrzeigersinn bis zum Anschlag festdrehen (7).
Die Blechschraube festziehen (8).
O-Ring am Gerätekopf auf Beschädigungen prüfen und gegebenenfalls ersetzen (9).
Gerätekopf vorsichtig und mit leichtem Druck in das Gehäuse schieben. Die Zapfen des Gehäuses müssen in die
Nuten des Bajonettverschlusses greifen.
Gerätekopf unter leichtem Druck im Uhrzeigersinn bis zum Anschlag drehen.
Die Abdeckkappe für das UVC-Vorklärgerät wieder aufstecken.
1. Blechschraube soweit lösen, bis die Schraubenspitze im Gehäuse der Klemmschraube versenkt ist.
2. Klemmschraube gegen den Uhrzeigersinn abschrauben.
3. Quarzglas mit O-Ring mit einer leichten Drehbewegung nach vorne abziehen.
4. UVC-Lampe herausziehen und ersetzen.
5. Quarzglas mit O-Ring vorsichtig bis zum Anschlag in den Gerätekopf drücken.
– O-Ring reinigen, bei Beschädigung ersetzen.
– Der O-Ring muss in dem Spalt zwischen Gerätekopf und Quarzglas liegen.
6. Klemmschraube im Uhrzeigersinn bis zum Anschlag festdrehen.
7. Blechschraube festziehen.

Chat with your Oase BioPress 4000 manual using AI

Get instant AI answers from your Oase BioPress 4000 manual

Ask anything about the Oase BioPress 4000. Answers come from this manual, with the pages they are based on.

BioPress 4000 Maintenance Schedule

Remind me when maintenance is due
Monthly
Clean filter media

Clean filters every four weeks or when dirty water returns to the pond. Perform quick cleaning first.

Every 8,000 hours
Replace UVC lamp

Replace the UVC lamp after approximately 8,000 operating hours for optimum filter performance.

Show in the manual (page 10)
Annually
Winterize and store unit

At water temperatures below 8 C or before frost, drain unit, clean thoroughly, and store filters dry and frost-free.

Show in the manual (page 11)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend BioPress 4000?

Yes No

Frequently Asked Questions

A

It is used to mechanically and biologically clean garden pond water. The built-in UVC unit also helps reduce algae and bacteria, supporting clearer water and a healthier pond environment.

Is this answer helpful?

A

It starts working right away, but the full biological cleaning effect takes several weeks to develop. Better results appear as beneficial bacteria establish themselves in the filter media.

Is this answer helpful?

A

Routine cleaning is recommended about every four weeks, or sooner if dirty water returns to the pond. A quick-clean cycle can handle lighter buildup before a full cleaning is needed.

Is this answer helpful?

A

No. It must never be operated without water flow. Running it dry can damage the system and reduce safety and performance.

Is this answer helpful?

A

The lamp is typically replaced after about 8,000 operating hours. If water clarity drops or the lamp no longer works, replacement may be needed sooner.

Is this answer helpful?

A

Drain and clean it thoroughly, remove and dry the filter media, and store all parts in a frost-free place. It should be taken out of service when water temperatures fall below 8°C or frost is expected.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Combines mechanical, biological, and UVC filtration for broader water-cleaning support.
  • Quick-clean function makes routine maintenance faster and less disruptive.
  • Compact pressure-filter design fits well in small to medium garden ponds.
  • Transparent outlet detail helps users monitor cleaning performance more easily.
VS

Disadvantages

  • Full biological performance develops gradually, especially after a new installation.
  • Requires regular cleaning and occasional lamp replacement to stay effective.
  • Must be installed with care, including distance, pressure, and flow limits.
  • Not suitable for dry running, harsh chemicals, or frozen-season operation.
M: OA-GPT-54-NAN

Product Specification

Power

25W

Flow rate

396.26 gal/h

Pond volume

max. 1056.69 gal, max. 528.34 gal (with fish stock)

Cable length

32.81 ft

Scope of delivery

14.76 ft 3/4" hose

M: OA-GPT-54-NAN

Product Description

Oase BioPress Set 4000 Pond Filter Set Manual: A Practical Guide to Clearer Pond Water

The Oase BioPress Set 4000 Pond Filter Set is built for pond owners who want cleaner water, healthier fish, and less visible debris without making pond care complicated. Designed for mechanical and biological filtration, this system combines pressure-filter performance with UVC support to help reduce algae, bacteria, and suspended dirt in a compact setup.

What makes this pond filter set stand out is its balanced approach. The filter media trap larger particles first, while the biological stage supports the natural breakdown of waste over time. The integrated UVC clarifying unit adds another layer of protection by targeting green water and limiting microbial growth. For new pond setups, this means the water may not become crystal clear overnight, but steady improvement is part of the design.

The Oase BioPress Set 4000 Pond Filter Set Manual emphasizes correct installation, safe operation, and regular maintenance. Placement matters: the unit should stay at least 2 meters from the water, protected from flooding and direct sun. It also needs proper water flow, a pressure limit of 0.2 bar, and careful hose connections to keep performance stable. These rules are less about complexity and more about protecting the system and extending its service life.

Cleaning is straightforward when done regularly. The quick-clean function helps flush out trapped dirt without a full teardown, while deeper maintenance lets you clean the foam filters, housing, and quartz glass when needed. The UVC lamp is a wear part, typically replaced after about 8,000 hours, and the system performs best during warmer months when beneficial bacteria are more active.

Overall, this filter set is a solid choice for smaller ornamental ponds that need dependable filtration with a manageable maintenance routine. It is especially appealing to pond keepers who want a proven, practical solution rather than a highly technical system.

Notes

  • Use only with clean water and proper flow.
  • Clean filters regularly to prevent clogging and leaks.
  • Store dry and frost-free before winter.
  • Replace wear parts with original OASE components for best results.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly