NAD C 268 Manual
PDF manual · 10 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your NAD C 268 manual using AI
Get instant AI answers from your NAD C 268 manual
Ask anything about the NAD C 268. Answers come from this manual, with the pages they are based on.
C 268 Maintenance Schedule
Unplug the product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning. If necessary, lightly dampen the cloth with soapy water.
Ask a Question
Do you recommend C 268?
Yes NoFrequently Asked Questions
The NAD C 268 delivers 80 watts per channel continuously into 8 ohms and 4 ohms with both channels driven. Its IHF dynamic power rating is 120 watts into 8 ohms and 200 watts into 4 ohms.
Is this answer helpful?
Yes. Switch on Bridge Mode and connect one 8-ohm speaker between the L+ and R- terminals. In this configuration, the amplifier provides approximately 300 watts of continuous power. Lower-than-8-ohm speakers are not recommended in bridge mode.
Is this answer helpful?
Yes. The amplifier has balanced XLR inputs as well as single-ended RCA inputs. XLR wiring uses pin 1 for ground, pin 2 for positive signal, and pin 3 for negative signal return.
Is this answer helpful?
Fixed mode sets the amplifier for use with an external component that controls volume, such as a preamplifier or processor. Variable mode lets you adjust input level with the INPUT LEVEL control, which works as a trim control rather than a complete volume control.
Is this answer helpful?
Yes. Auto Sense can bring the amplifier out of standby when it detects an input signal. It has low, mid, and high sensitivity settings. A 12 V trigger input can also switch it on from a compatible control component.
Is this answer helpful?
Yes. The LINE OUT connectors support daisy-chaining. Connect them to the corresponding analog input of another compatible amplifier, receiver, or processor to extend the system.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Delivers 80 W per channel into 8 or 4 ohms for capable stereo speaker drive.
- Bridge mode provides about 300 W into 8 ohms for higher-output mono applications.
- Includes balanced XLR and single-ended RCA inputs for broad system compatibility.
- Auto sensing and 12 V trigger connections support convenient automated system control.
- Line outputs allow daisy-chaining additional amplifiers in expanded installations.
Disadvantages
- Bridge mode is recommended only with 8-ohm speakers, limiting low-impedance mono setups.
- The variable input control is level trimming, not a full front-panel volume control.
- No digital, USB, HDMI, or wireless inputs are included; it is an analog power amplifier.
- Blue speaker terminals must not be grounded or used with shared-ground accessories.
- Adequate ventilation is essential to prevent overheating in enclosed installations.
Product Specification
Channels
2
Power per Channel
80 W (8 ohm), 80 W (4 ohm)
Connections
Stereo Line In (RCA), Stereo Line In (XLR)
Power Consumption
0.5 W standby
Color
black
Dimensions
17.13 x 3.94 x 15.35 in (W x H x D)
Weight
16.09 lb
Product Description
NAD C 268 Manual: Powerful Stereo Amplification for Flexible Systems
The NAD C 268 is a versatile stereo power amplifier designed for hi-fi and home theater systems that need clean power, flexible connections, and straightforward control. This model delivers 80 watts per channel into both 8 and 4 ohms in stereo operation, giving compatible speakers a strong, controlled foundation for music, movies, and everyday listening. For listeners building a system around a separate preamplifier, streaming component, or AV processor, the NAD C 268 Manual highlights the practical options available for integrating the amplifier.
Stereo Power and Bridged Mono Performance
A key feature of the C 268 is its bridge mode. When configured for mono operation and paired with an 8-ohm speaker, it can provide approximately 300 watts of continuous output. This makes it useful in larger setups or installations where extra headroom is needed. Two units can also be considered for high-power stereo arrangements, with each amplifier assigned to one channel.
The amplifier offers low measured distortion and a broad 20 Hz to 20 kHz frequency response. Its dynamic power capability reaches 120 watts into 8 ohms and 200 watts into 4 ohms in stereo mode, helping it handle demanding musical peaks. A damping factor above 100 also supports controlled speaker performance.
Connections and Everyday Control
The rear panel includes both balanced XLR and single-ended RCA analog inputs. Separate input selectors allow the left and right channels to use the desired connection type. Balanced connections can be especially valuable in installations where long cable runs or noise resistance are priorities, while RCA inputs provide easy compatibility with many conventional audio components.
A fixed or variable input mode adds installation flexibility. Fixed mode lets an external preamplifier or processor manage volume, while variable mode enables level trimming through the front-accessible rear-panel control. The C 268 also includes line output connections for daisy-chaining additional amplifiers.
Automation and Installation Features
The C 268 supports automatic signal sensing, with low, mid, and high trigger thresholds. It can wake from standby when it detects an incoming audio signal. A 12-volt trigger input and output provide another way to coordinate power status with compatible preamps, receivers, and system controllers.
For safe installation, use a grounded outlet, maintain ventilation clearance around the chassis, and verify speaker polarity before power-up. In bridge mode, NAD recommends 8-ohm speakers; lower impedances are not advised because the amplifier may activate thermal protection at high levels.
Notes
- Do not connect the blue speaker terminals to ground or a shared common connection.
- Keep the amplifier on a firm, level surface with clear airflow around it.
- Use bridge mode only with correctly wired 8-ohm speakers.
- Select fixed input mode when volume is controlled by an external preamplifier.
Search for 67,706 Manuals online
Type-in Brand or Model