Manual.ly Logo

Makita N5900B Manual

4.9 · 22 Ratings

PDF manual · 56 Pages

English

M: QW-35-FL
page

/ 56

Loading...
68b9656d5ff046f53abe7400347f8447d673 page 7
7
Bevel cutting (Fig. 2)
Loosen the clamping screws in front and back, and tilt the
tool to the desired angle for bevel cuts (0° – 50°). Secure
the clamping screws tightly in front and back after making
the adjustment.
Sighting (Fig. 3)
For straight cuts, align the A position on the front of the
base with your cutting line. For 45° bevel cuts, align the B
position with it.
Switch action (Fig. 4)
CAUTION:
• Before plugging in the tool, always check to see that
the switch trigger actuates properly and returns to the
“OFF” position when released.
For tool with lock button
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
For tool with lock-off button
To prevent the switch trigger from being accidentally
pulled, a lock-off button is provided. To start the tool,
push in the lock-off button and pull the switch trigger.
Release the switch trigger to stop.
For tool without lock button and lock-off button
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Removing or installing saw blade (Fig. 5 & 6)
CAUTION:
• Be sure the blade is installed with teeth pointing up at
the front of the tool.
• Use only the Makita wrench to install or remove the
blade.
To remove the blade, press the shaft lock so that the
blade cannot revolve and use the wrench to loosen the
hex bolt counterclockwise. Then remove the hex bolt,
outer flange and blade.
To install the blade, follow the removal procedure in
reverse. BE SURE TO TIGHTEN THE HEX BOLT
CLOCKWISE SECURELY.
The following blade can be used with the tool.
Side grip (auxiliary handle) (Fig. 7)
Install the side grip on the tool securely before operation.
Joint set (Accessory) (Fig. 8 & 9)
Attach the joint to the chip chute in the blade case and
secure it with the screws.
Remove the lever attached to the main unit and attach
lever of joint set.
OPERATION
CAUTION:
• Be sure to move the tool forward in a straight line
gently. Forcing or twisting the tool will result in
overheating the motor and dangerous kickback,
possibly causing severe injury.
Hold the tool firmly. The tool is provided with both a front
grip and rear handle. Use both to best grasp the tool. If
both hands are holding saw, they cannot be cut by the
blade. Set the base on the workpiece to be cut without
the blade making any contact. Then turn the tool on and
wait until the blade attains full speed. Now simply move
the tool forward over the workpiece surface, keeping it
flat and advancing smoothly until the sawing is
completed. To get clean cuts, keep your sawing line
straight and your speed of advance uniform. If the cut
fails to properly follow your intended cut line, do not
attempt to turn or force the tool back to the cut line. Doing
so may bind the blade and lead to dangerous kickback
and possible serious injury. Release switch, wait for blade
to stop and then withdraw tool. Realign tool on a new cut
line, and start cut again. Attempt to avoid positioning
which exposes operator to chips and wood dust being
ejected from saw. Use eye protection to help avoid injury.
(Fig. 10)
Rip fence (Guide rule) (Fig. 11)
The handy rip fence allows you to do extra-accurate
straight cuts. Simply slide the rip fence up snugly against
the side of the workpiece and secure it in position with
the screw on the front of the base. It also makes repeated
cuts of uniform width possible.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspection or
maintenance.
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
Replacing carbon brushes (Fig. 12 & 13)
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps. Take
out the worn carbon brushes, insert the new ones and
secure the brush holder caps.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
Max. dia. Min. dia.
235 mm 230 mm

Chat with your Makita N5900B manual using AI

Get instant AI answers from your Makita N5900B manual

Ask anything about the Makita N5900B. Answers come from this manual, with the pages they are based on.

N5900B Maintenance Schedule

Before each use
Check lower guard closing and spring operation

Ensure the lower guard moves freely and closes instantly. Check the spring; if sluggish or damaged, service before use.

Regularly
Inspect and replace carbon brushes

Remove and check regularly. Replace both when worn to limit mark. Keep clean and free to slip in holders.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend N5900B?

Yes No
0
User Pic

Ellen Schneider

6 months ago

Does this saw have a soft-start feature to reduce inrush current, and is the dust extraction port compatible with standard vacuum hoses?

0
User Pic

Manual.ly

6 months ago

The Makita N5900B delivers powerful performance at 2000 watts but does not include a built-in soft-start function. For applications requiring it, we recommend using an external inrush current limiter on your power outlet. Regarding dust extraction, the included nozzle has a non-standard diameter that may not fit all commercial vacuum hose adapters directly. You might need specific adapters or a universal connector to ensure a tight seal with your existing vacuum cleaner.

M: QW-35-FL
M: QW-35-FL
0
User Pic

Elena Kowalski

6 months ago

Is this circular saw suitable for cutting hardwoods like Bongossi daily, and how easy is the depth adjustment mechanism?

M: QW-35-FL

Frequently Asked Questions

A

The Makita N5900B can cut up to 85 mm deep when set to a 90-degree angle. This allows for substantial material removal in a single pass.

Is this answer helpful?

A

Yes, the tool is Class II double-insulated. It is safe to operate on sockets without an earth wire, provided the voltage matches the nameplate specifications.

Is this answer helpful?

A

To prevent kickback, maintain a firm two-handed grip, support the workpiece properly near the cut line, and never force the saw forward too quickly.

Is this answer helpful?

A

This model accepts blades with a diameter between 230 mm and 235 mm. Ensure the arbor hole shape matches the mounting hardware for safe operation.

Is this answer helpful?

A

Inspect the carbon brushes regularly. Replace them when they wear down to the limit mark shown on the brush holder cap to maintain motor performance.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High-speed motor delivers 4,100 RPM for efficient cutting through thick timber
  • Double insulation allows safe operation without an earth wire connection
  • Ergonomic dual-grip design ensures stable control and reduces user fatigue
VS

Disadvantages

  • Relatively heavy at 7.2 kg which may cause arm strain during extended overhead work
  • Noise emission of 100 dB requires mandatory ear protection for all users
  • Lower guard mechanism requires regular cleaning to prevent sluggish movement
M: QW-35-FL

Product Specification

Type

Circular saw

Power

2000W

No-load speed

4100 rpm

Blade diameter

9.25 in

Cutting capacity

3.35 in (cutting depth at 0°), 2.36 in (cutting depth at 45° tilt)

Bevel angle

45° left

Tool holder

Bore 1.18 in, spindle lock

Features

Auxiliary handle, rip fence, dust extraction, bevel function

Weight

15.87 lbs

M: QW-35-FL

Product Description

Mastering Precision with the Makita N5900B Electric Hand Circular Saw

The Makita N5900B Electric Hand Circular Saw stands as a robust companion for professional carpenters and DIY enthusiasts alike. This powerful tool is designed to deliver clean, accurate cuts in wood with ease. Whether you are performing lengthwise cuts, crosscuts, or precise mitre angles, the N5900B handles the task with confidence. Its heavy-duty construction ensures durability, while the ergonomic design keeps operator fatigue to a minimum during long projects.

Equipped with a 235 mm blade diameter, this saw offers a maximum cutting depth of 85 mm at 90 degrees and 60 mm at 45 degrees. The no-load speed of 4,100 revolutions per minute provides the necessary power to slice through various timber types smoothly. The machine features a double-insulated safety class II system, allowing it to be used safely on standard sockets without an earth wire. Safety is paramount, which is why the N5900B includes a lower guard that automatically retracts upon contact with the workpiece and snaps back instantly when the cut is finished.

Adjustability is a key feature of this circular saw manual. Users can easily set the cutting depth by loosening the lever and moving the base plate to the desired level before securing it tightly. For bevel cuts ranging from 0 to 50 degrees, the clamping screws allow for quick and secure angle adjustments. The included rip fence ensures straight, repeatable cuts, making it ideal for ripping boards to uniform widths. Additionally, the side grip provides extra stability, ensuring both hands remain safely away from the blade path.

Maintenance is straightforward with accessible carbon brush holders. Regular inspection and replacement of brushes keep the motor running efficiently. Always ensure the tool is unplugged before any maintenance tasks. The saw also comes with detailed instructions for proper blade installation, emphasizing the use of the correct Makita wrench to prevent eccentric rotation. By following the guidelines in the manual, users can maximize the lifespan and performance of their Makita N5900B.

Important Notes

  • Always wear hearing protection and a dust mask due to noise levels reaching 100 dB.
  • Never force the saw; let the blade cut at its own pace to avoid kickback.
  • Ensure the lower guard moves freely before every operation.
  • Support large panels near the cut line to prevent sagging and binding.
M: QW-35-FL

© Copyright 2026 Manual.ly