Manual.ly Logo

Makita N5900B Manual

4.9 · 22 Ratings

PDF manual · 56 Pages

English

M: QW-35-FL
page

/ 56

Loading...
68b9656d5ff046f53abe7400347f8447d673 page 4
4
ENGLISH (Original instructions)
Explanation of general view
1Lever
2Wing nut
3 Bevel scale plate
4 Base plate
5 Cutting line
6 Lock button/Lock-off button
7 Switch trigger
8 Shaft lock
9 Wrench
10 Hex bolt
11 Saw blade
12 Outer flange
13 Inner flange
14 Side grip
15 Rear handle
16 Front grip
17 Base
18 Guide rule
19 Limit mark
20 Brush holder cap
21 Screwdriver
SPECIFICATIONS
Model N5900B
Blade diameter .................................................... 235 mm
Max. cutting depth
at 90° ................................................................. 85 mm
at 45° ................................................................. 60 mm
at 50° ................................................................. 53 mm
No load speed (min
–1
) ............................................ 4,100
Overall length ...................................................... 380 mm
Net weight ............................................................. 7.2 kg
Safety class.............................................................. /II
• Due to our continuing programme of research and
development, the specifications herein are subject to
change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE028-1
Intended use
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
ENF100-1
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under unfavor-
able mains conditions can have adverse effects to the
operation of other equipment. With a mains impedance
equal or less than 0.31 Ohms it can be presumed that
there will be no negative effects.
The mains socket used for this device must be protected
with a fuse or protective circuit breaker having slow
tripping characteristics.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
GEB013-3
CIRCULAR SAW SAFETY WARNINGS
Danger:
1. Keep hands away from cutting area and the
blade. Keep your second hand on auxiliary
handle, or motor housing. If both hands are
holding the saw, they cannot be cut by the blade.
2. Do not reach underneath the workpiece. The
guard cannot protect you from the blade below the
workpiece.
3. Adjust the cutting depth to the thickness of the
workpiece. Less than a full tooth of the blade teeth
should be visible below the workpiece.
4. Never hold piece being cut in your hands or
across your leg. Secure the workpiece to stable
platform. It is important to support the work properly
to minimize body exposure, blade binding, or loss of
control.
5. Hold power tool by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a “live” wire will also make exposed
metal parts of the power tool “live” and shock the
operator.
6. When ripping always use a rip fence or straight
edge guide. This improves the accuracy cut and
reduces the chance of blade binding.
7. Always use blades with correct size and shape
(diamond versus round) of arbour holes. Blades
that do not match the mounting hardware of the saw
will run eccentrically, causing loss of control.
A typical illustration of proper hand support, work-
piece support, and supply cord routing (if applicable).

Chat with your Makita N5900B manual using AI

Get instant AI answers from your Makita N5900B manual

Ask anything about the Makita N5900B. Answers come from this manual, with the pages they are based on.

N5900B Maintenance Schedule

Before each use
Check lower guard closing and spring operation

Ensure the lower guard moves freely and closes instantly. Check the spring; if sluggish or damaged, service before use.

Regularly
Inspect and replace carbon brushes

Remove and check regularly. Replace both when worn to limit mark. Keep clean and free to slip in holders.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend N5900B?

Yes No
0
User Pic

Ellen Schneider

6 months ago

Does this saw have a soft-start feature to reduce inrush current, and is the dust extraction port compatible with standard vacuum hoses?

0
User Pic

Manual.ly

6 months ago

The Makita N5900B delivers powerful performance at 2000 watts but does not include a built-in soft-start function. For applications requiring it, we recommend using an external inrush current limiter on your power outlet. Regarding dust extraction, the included nozzle has a non-standard diameter that may not fit all commercial vacuum hose adapters directly. You might need specific adapters or a universal connector to ensure a tight seal with your existing vacuum cleaner.

M: QW-35-FL
M: QW-35-FL
0
User Pic

Elena Kowalski

6 months ago

Is this circular saw suitable for cutting hardwoods like Bongossi daily, and how easy is the depth adjustment mechanism?

M: QW-35-FL

Frequently Asked Questions

A

The Makita N5900B can cut up to 85 mm deep when set to a 90-degree angle. This allows for substantial material removal in a single pass.

Is this answer helpful?

A

Yes, the tool is Class II double-insulated. It is safe to operate on sockets without an earth wire, provided the voltage matches the nameplate specifications.

Is this answer helpful?

A

To prevent kickback, maintain a firm two-handed grip, support the workpiece properly near the cut line, and never force the saw forward too quickly.

Is this answer helpful?

A

This model accepts blades with a diameter between 230 mm and 235 mm. Ensure the arbor hole shape matches the mounting hardware for safe operation.

Is this answer helpful?

A

Inspect the carbon brushes regularly. Replace them when they wear down to the limit mark shown on the brush holder cap to maintain motor performance.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High-speed motor delivers 4,100 RPM for efficient cutting through thick timber
  • Double insulation allows safe operation without an earth wire connection
  • Ergonomic dual-grip design ensures stable control and reduces user fatigue
VS

Disadvantages

  • Relatively heavy at 7.2 kg which may cause arm strain during extended overhead work
  • Noise emission of 100 dB requires mandatory ear protection for all users
  • Lower guard mechanism requires regular cleaning to prevent sluggish movement
M: QW-35-FL

Product Specification

Type

Circular saw

Power

2000W

No-load speed

4100 rpm

Blade diameter

9.25 in

Cutting capacity

3.35 in (cutting depth at 0°), 2.36 in (cutting depth at 45° tilt)

Bevel angle

45° left

Tool holder

Bore 1.18 in, spindle lock

Features

Auxiliary handle, rip fence, dust extraction, bevel function

Weight

15.87 lbs

M: QW-35-FL

Product Description

Mastering Precision with the Makita N5900B Electric Hand Circular Saw

The Makita N5900B Electric Hand Circular Saw stands as a robust companion for professional carpenters and DIY enthusiasts alike. This powerful tool is designed to deliver clean, accurate cuts in wood with ease. Whether you are performing lengthwise cuts, crosscuts, or precise mitre angles, the N5900B handles the task with confidence. Its heavy-duty construction ensures durability, while the ergonomic design keeps operator fatigue to a minimum during long projects.

Equipped with a 235 mm blade diameter, this saw offers a maximum cutting depth of 85 mm at 90 degrees and 60 mm at 45 degrees. The no-load speed of 4,100 revolutions per minute provides the necessary power to slice through various timber types smoothly. The machine features a double-insulated safety class II system, allowing it to be used safely on standard sockets without an earth wire. Safety is paramount, which is why the N5900B includes a lower guard that automatically retracts upon contact with the workpiece and snaps back instantly when the cut is finished.

Adjustability is a key feature of this circular saw manual. Users can easily set the cutting depth by loosening the lever and moving the base plate to the desired level before securing it tightly. For bevel cuts ranging from 0 to 50 degrees, the clamping screws allow for quick and secure angle adjustments. The included rip fence ensures straight, repeatable cuts, making it ideal for ripping boards to uniform widths. Additionally, the side grip provides extra stability, ensuring both hands remain safely away from the blade path.

Maintenance is straightforward with accessible carbon brush holders. Regular inspection and replacement of brushes keep the motor running efficiently. Always ensure the tool is unplugged before any maintenance tasks. The saw also comes with detailed instructions for proper blade installation, emphasizing the use of the correct Makita wrench to prevent eccentric rotation. By following the guidelines in the manual, users can maximize the lifespan and performance of their Makita N5900B.

Important Notes

  • Always wear hearing protection and a dust mask due to noise levels reaching 100 dB.
  • Never force the saw; let the blade cut at its own pace to avoid kickback.
  • Ensure the lower guard moves freely before every operation.
  • Support large panels near the cut line to prevent sagging and binding.
M: QW-35-FL

© Copyright 2026 Manual.ly