Manual.ly Logo

Krups EA8170 Arabica Display Manual

0.0 · 0 Ratings

PDF manual · 74 Pages

English

M: QW-35-FL
page

/ 74

Loading...
7bc8af95ffe4a88f6dd7a70041aa269ac001 page 11
29
28
If one of the problems described in the table persists, contact KRUPS customer service.
PROBLEM MALFUNCTION CORRECTIVE ACTION
Your machine detects a fault:
a
symbol appears.
Switch off and disconnect the machine, remove the filter cartridge, wait for a
minute and restart the machine.
The appliance does not turn
on when the
button is
pressed.
Check your fuses and plug sockets.
Check that the two power plugs are pushed in properly both on the appliance
and at the socket.
The coffee grinder makes a
strange noise.
There is a foreign body in the grinder. Disconnect the machine before inves-
tigating.
See if you can extract the foreign body using your vacuum cleaner.
The steam nozzle makes a
noise.
Check that the steam nozzle is correctly attached to its corresponding end
piece.
The steam nozzle on your
machine seems partially or
completely clogged.
Ensure that the opening in the end piece is not obstructed by milk residue or
limescale. Unclog the holes with the needle supplied with your appliance.
The steam nozzle makes little
or no milk froth.
For milk-based drinks, you use very fresh, very cold pasteurised or UHT milk.
It is also advisable to use a cold container. If the results do not improve, try
changing the brand of milk.
No steam comes out of the
nozzle.
Empty the tank and temporarily remove the filter cartridge. Fill the water tank
with mineral water which is high in calcium (> 100 mg/l) and run successive
steam cycles.
The auto-cappuccino setting
makes little or no froth.
The auto-cappuccino setting
does not take in milk.
Check that the accessory is correctly attached to the appliance, remove it
then replace it.
Check that the flexible tube is not obstructed or pierced and that it is correctly
attached to the accessory so as to make it airtight. Rinse and clean the ac-
cessory (refer to the “Auto-cappuccino accessory” chapter).
There is water underneath the
appliance.
Before removing the water tank, wait for 15 seconds after the coffee has fini-
shed flowing so that the machine finishes its cycle properly.
Check that the drip tray is correctly positioned on the machine; it should
always be in place, even when the appliance is not in use.
Check that the drip tray is not full.
The drip tray should not be removed during a cycle.
After emptying the coffee
grounds collector, the warning
message is still displayed on
the screen.
Correctly replace the coffee grounds collector and follow the instructions on
the screen.
Wait at least 8 seconds before replacing them.
TROUBLESHOOTING
SETTINGS
All of the following options allow you to run the selected programs:
SETTINGS
You can set your water hardness between 0 and 4 by
pressing the + or – buttons . See “Measuring water
hardness” (below)
You can program automatic rinsing each time the appliance is
turned on by pressing the buttons and selecting ON.
You can choose the period after which your appliance will turn off
automatically (between 15 and 120 minutes by pressing the
buttons).
You can adjust the temperature of your coffee to three different
levels by pressing the buttons.
Return to coffee types menu.
Measuring water hardness
It is advisable to adjust the appliance according to the hardness of the water used. To check the water hardness, use
the stick supplied with your machine or contact your local water authority.
Degree of
hardness
Class 0
Very soft
Class 1
Soft
Class 2
Average hardness
Class 3
Hard
Class 4
Very hard
° dH < 3° > 4° > 7° > 14° > 21°
° e < 3,75° > 5° > 8,75° > 17,5° > 26,25°
° f < 5,4° > 7,2° > 12,6° > 25,2° > 37,8°
Appliance
settings
0 1 2 3 4
Installing the filter (Claris - Aqua Filter System cartridge) (32)
Note : To correctly install your cartridge, ensure that you follow the installation procedure each time you replace it.
(33) A mechanism which memorises the month in which the cartridge was changed and replaced (after a maximum
of 2 months): set the date using the cartridge cursor. Fit the cartridge in the tank (34). In the maintenance and settings
menu
, the function indicator is located above the maintenance button . Using the navigation button ,
select the filter cartridge installation symbol . The symbols and the start button start to flash.
Place a 0.6 L container under the steam nozzle.
Press start
. The start-up cycle begins and finished when the coffee types menu appears

Chat with your Krups EA8170 Arabica Display manual using AI

Get instant AI answers from your Krups EA8170 Arabica Display manual

Ask anything about the Krups EA8170 Arabica Display. Answers come from this manual, with the pages they are based on.

EA8170 Arabica Display Maintenance Schedule

Remind me when maintenance is due
Every 2 months
Replace Claris Aqua Filter System cartridge

The cartridge has a date mechanism indicating replacement after a maximum of 2 months to ensure optimal taste and machine life.

Show in the manual (page 17)
When prompted by machine
Run automatic cleaning program with KRUPS tablet

Insert KRUPS cleaning tablet into the funnel. Fill water tank to max level. Place a 0.6L container under nozzles and start the cycle.

Show in the manual (page 16)
When prompted by machine
Run descaling program with KRUPS sachet

Remove filter cartridge if installed. Add one sachet of KRUPS descaler to water tank up to CALC mark. Run the full program.

Show in the manual (page 16)
After every use or when full
Empty coffee grounds collector and drip tray

Empty and clean both components when the warning symbol flashes or floats indicate they are full. Reinstall correctly to avoid errors.

Show in the manual (page 15)
After steam use
Clean steam nozzle and unclog air holes

Run a brief steam cycle over a container to flush milk residues. Remove nozzle for deep cleaning with brush and needle if clogged.

Show in the manual (page 15)
If unused for several days
Rinse hydraulic circuits

Perform a manual rinse via the maintenance menu to clear stagnant water from the coffee and steam circuits before brewing.

Show in the manual (page 14)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend EA8170 Arabica Display?

Yes No

Frequently Asked Questions

A

You can adjust the strength by turning the fineness knob inside the bean container. Turning left makes the grind finer for stronger coffee, while turning right makes it coarser for milder coffee.

Is this answer helpful?

A

For the best results, use very fresh, cold pasteurized or UHT milk. Avoid raw milk as it does not produce optimal foam consistency.

Is this answer helpful?

A

The machine will alert you when cleaning is needed. It is recommended to run the cleaning program monthly or whenever the indicator light flashes to maintain hygiene.

Is this answer helpful?

A

Yes, the machine has a two-cup function that automatically runs two complete preparation cycles consecutively to serve two cups simultaneously.

Is this answer helpful?

A

Ensure you pre-heat your cups with hot water. You can also increase the coffee temperature setting in the maintenance menu if the default level is too low.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Compact Thermoblock system ensures rapid heating and energy efficiency
  • 15-bar pump delivers authentic crema on every shot
  • Intuitive LCD display simplifies navigation and programming
  • Metal burr grinder provides consistent freshness for all bean types
  • Automated cleaning and descaling cycles reduce manual effort
VS

Disadvantages

  • Steam wand requires manual frothing technique for optimal texture
  • Water tank capacity may require frequent refilling for heavy users
  • Optional accessories like auto-cappuccino set sold separately
  • Grind adjustment must be done while machine is running for accuracy
  • Descaling cycle requires specific KRUPS products for best results
M: QW-35-FL

Product Specification

Power

1948.25W

Color

black

Pump pressure

217.56psi

Coffee system

whole beans

Milk system

no

Grinder

adjustable conical grinder (3 settings)

Coffee amount

adjustable

Water amount

adjustable

Coffee temperature

adjustable (3 settings)

Water tank capacity

0.45gal

Bean hopper capacity

0.57lb

Display

yes

Features

double height-adjustable drink spout, auto shut-off, steam nozzle, milk frother (Cappuccinatore), hot water function, integrated water filter, automatic cleaning program, automatic descaling program

Dimensions

15x19.06x11.3in (WxDxH)

Weight

15.43lb

M: QW-35-FL

Product Description

Discover the Krups EA 8170 Arabica Display Black Manual Experience

Welcome to the world of home brewing excellence with the Krups EA 8170 Arabica Display Black. This automatic espresso machine is designed for those who demand restaurant-quality coffee without leaving their kitchen. The device features a Compact Thermoblock System and a powerful 15-bar pump, ensuring that every cup of ristretto, espresso, or coffee is extracted at the perfect temperature with maximum aroma.

The user-friendly LCD display guides you through every step, from preparing your favorite drink to performing essential maintenance. You have full control over volume, intensity, and temperature, allowing you to customize each beverage to your exact preference. Whether you crave a strong espresso or a creamy cappuccino using the steam wand, this machine delivers consistent results. The metal grinder ensures fresh beans are ground just before extraction, preserving the rich oils and flavors that define a great cup of coffee.

Maintenance is straightforward thanks to automated programs for rinsing, cleaning, and descaling. The machine alerts you when it needs attention, ensuring longevity and optimal performance. With its sleek black design and ergonomic interface, the Krups EA 8170 fits seamlessly into any modern kitchen while offering professional-grade functionality.

Key Notes for Users

  • Always pre-heat your porcelain cups for the best espresso temperature and crema.
  • Use fresh, cold tap water free of chlorine for superior taste.
  • Adjust the grind fineness knob during grinding for the most accurate settings.
  • Clean the steam nozzle immediately after use to prevent milk residue buildup.
  • Utilize the optional Claris Aqua Filter cartridge to extend machine life and improve flavor.
M: QW-35-FL

© Copyright 2026 Manual.ly