Manual.ly Logo

Krups EA8170 Arabica Display Manual

0.0 · 0 Ratings

PDF manual · 74 Pages

English

M: QW-35-FL
page

/ 74

Loading...
7bc8af95ffe4a88f6dd7a70041aa269ac001 page f
25
24
■A screen indicates that the appliance is heating up. Once the appliance has finished heating up, you can begin to
make steam by pressing START
, and following these steps (13):
Step 1: holding the milk jug in place, insert the steam nozzle approximately 2 cm into the milk and wait for it to
start frothing.
Step 2: raise the container slightly (approximately 1 cm). Do not completely submerge the metal tube.
Step 3: gradually lower the container as the froth accumulates. (14)
■When you have frothed the milk enough, press the STOP button
to stop the cycle. Warning: the cycle does not
stop immediately.
■To remove any milk traces from the steam nozzle, place a container under the nozzle and start the steam function
again (approximately 10 seconds).
■The steam nozzle is removable in order to allow for deep cleaning. Wash it with water and a little non-abrasive
detergent using a brush. Rinse and dry (15-16). Before replacing, make sure that the air holes are not clogged with
milk residue. Unclog the holes with the needle supplied with your appliance if necessary (17).
■To stop the steam, press the STOP button
.
WARNING: THE CYCLE DOES NOT STOP IMMEDIATELY.
Steam can be produced for a maximum of 2 minutes per cycle.
Auto-cappuccino XS 6000 set (sold separately)
■This auto-cappuccino accessory enables you to make cappuccinos or lattes (18). Connect the different parts to
each other. Ensure that the pipe is not pierced by keeping the knob in the correct place.
■After removing the lid, fill the jug with milk (19) and place a cup or glass under the auto-cappuccino nozzle (20).
Select cappuccino or latte on the special nozzle (21).
■Start steam, as indicated in the chapter Making drinks with steam.
■Once you have made the milk froth, place your cup under the coffee jets and start a coffee cycle (22).
To prevent the milk from drying on the auto-cappuccino accessory, ensure that you clean it thoroughly. You are advised
to wash it immediately by running a steam cycle with the accessory jug filled with water in order to clean the inside
of the nozzle. For this you can use the KRUPS liquid detergent available separately.
Emptying the coffee grounds collector and the drip tray
■If the
symbol starts flashing, empty and clean the drip tray (the drip tray may contain coffee grains) and the coffee
grounds collector (23-25).
■The drip tray is fitted with floats which indicate when it needs to be emptied (26). Once you have removed the coffee
grounds collector, you should empty it completely in order to avoid any overflow.
■The warning message will continue to be displayed if the coffee grounds collector is not pushed in or inserted
correctly (24). You cannot make an espresso or a coffee while the warning message is shown.
Rinsing the circuits :
Press the maintenance and settings button
(27). The function indicator is shown above the maintenance button
.
If necessary, using the navigation button,
select the rinse symbol .
Press START , rinsing starts and finishes when the coffee menu appears.
MAINTAINING YOUR APPLIANCE
Preparing the grinder
You can adjust the strength of your coffee by adjusting how finely the coffee beans are ground.
Generally, the finer the coffee is ground, the stronger and creamier the coffee will be, but this also depends on the
type of coffee used.
Adjust the fineness of grinding by turning the coffee grounds fineness adjustment knob
which is located in the
coffee bean container. It is advised that you do this during grinding, one notch at a time.
After 3 rounds, you will notice a pronounced difference in taste. To the left, the grounds are finer. To the right, the
grounds are courser. (7)
Claris F 088 - Aqua Filter System cartridge (Sold separately)
To optimise the taste of your drinks and the lifespan of your appliance, you are advised to only use a Claris - Aqua
Filter System cartridge with your machine (see the chapter OTHER FUNCTIONS – Installing the filter).
Every time you place a Claris-Aqua Filter into the machine you must prime the filter before using the machine by
activating the “install filter cartridge” program.
Note :
The amount of water for making an espresso is between 30 and 70 ml.
The amount of water for making a coffee is between 80 and 180 ml.
Starting preparation (with 1 or 2 cups)
■Press the on-off button
, and wait for the appliance to finish heating up.
■The coffee types menu is displayed. The function indicator is shown above the coffee types button (6).
■Place one or two cups under the coffee jets. You can lower or raise the coffee jets according to the size of your cup
(8). Select the coffee strength (shown coffee beans displayed on the screen in brackets) with the + button to
increase or the - button to decrease. (9).
■Press the navigation button to set the volume: select the volume of water displayed on the screen between
brackets using the + or - buttons (10).
■Press the navigation button
to set the number of cups: select 1 or 2 cups, displayed on the screen between
brackets using the + or - buttons
.
■Press the START button
(11).
■You can set the water volume at any time using the + or - buttons .
■To stop the flow into your cup, press the STOP button
.
■You can also adjust the temperature of your coffee (see the chapter OTHER functions - Settings).
Two cup function
The appliance will automatically carry out 2 full cycles of coffee preparation.
MAKING AN ESPRESSO AND A COFFEE
Steam is used to froth the milk, for example when preparing a cappuccino or caffe latte, and also to heat up liquids.
As a higher temperature is required when producing steam than when making an espresso, the appliance will launch
an additional pre-heating phase.
Frothing milk
■For best results, you are advised to use very fresh, very cold pasteurised or UHT milk, recently opened. Unpasteurised
milk does not produce the best results.
■Check that the steam nozzle is correctly positioned.
■Pour the milk into a milk jug which has a handle or into a cappuccino cup. Only fill it half way.
■When the screen displays the drink selection menu, press the steam button
(12). The function indicator is
located above the steam button
.
■Insert the steam nozzle into the milk.
MAKING DRINKS USING STEAM

Chat with your Krups EA8170 Arabica Display manual using AI

Get instant AI answers from your Krups EA8170 Arabica Display manual

Ask anything about the Krups EA8170 Arabica Display. Answers come from this manual, with the pages they are based on.

EA8170 Arabica Display Maintenance Schedule

Remind me when maintenance is due
Every 2 months
Replace Claris Aqua Filter System cartridge

The cartridge has a date mechanism indicating replacement after a maximum of 2 months to ensure optimal taste and machine life.

Show in the manual (page 17)
When prompted by machine
Run automatic cleaning program with KRUPS tablet

Insert KRUPS cleaning tablet into the funnel. Fill water tank to max level. Place a 0.6L container under nozzles and start the cycle.

Show in the manual (page 16)
When prompted by machine
Run descaling program with KRUPS sachet

Remove filter cartridge if installed. Add one sachet of KRUPS descaler to water tank up to CALC mark. Run the full program.

Show in the manual (page 16)
After every use or when full
Empty coffee grounds collector and drip tray

Empty and clean both components when the warning symbol flashes or floats indicate they are full. Reinstall correctly to avoid errors.

Show in the manual (page 15)
After steam use
Clean steam nozzle and unclog air holes

Run a brief steam cycle over a container to flush milk residues. Remove nozzle for deep cleaning with brush and needle if clogged.

Show in the manual (page 15)
If unused for several days
Rinse hydraulic circuits

Perform a manual rinse via the maintenance menu to clear stagnant water from the coffee and steam circuits before brewing.

Show in the manual (page 14)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend EA8170 Arabica Display?

Yes No

Frequently Asked Questions

A

You can adjust the strength by turning the fineness knob inside the bean container. Turning left makes the grind finer for stronger coffee, while turning right makes it coarser for milder coffee.

Is this answer helpful?

A

For the best results, use very fresh, cold pasteurized or UHT milk. Avoid raw milk as it does not produce optimal foam consistency.

Is this answer helpful?

A

The machine will alert you when cleaning is needed. It is recommended to run the cleaning program monthly or whenever the indicator light flashes to maintain hygiene.

Is this answer helpful?

A

Yes, the machine has a two-cup function that automatically runs two complete preparation cycles consecutively to serve two cups simultaneously.

Is this answer helpful?

A

Ensure you pre-heat your cups with hot water. You can also increase the coffee temperature setting in the maintenance menu if the default level is too low.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Compact Thermoblock system ensures rapid heating and energy efficiency
  • 15-bar pump delivers authentic crema on every shot
  • Intuitive LCD display simplifies navigation and programming
  • Metal burr grinder provides consistent freshness for all bean types
  • Automated cleaning and descaling cycles reduce manual effort
VS

Disadvantages

  • Steam wand requires manual frothing technique for optimal texture
  • Water tank capacity may require frequent refilling for heavy users
  • Optional accessories like auto-cappuccino set sold separately
  • Grind adjustment must be done while machine is running for accuracy
  • Descaling cycle requires specific KRUPS products for best results
M: QW-35-FL

Product Specification

Power

1948.25W

Color

black

Pump pressure

217.56psi

Coffee system

whole beans

Milk system

no

Grinder

adjustable conical grinder (3 settings)

Coffee amount

adjustable

Water amount

adjustable

Coffee temperature

adjustable (3 settings)

Water tank capacity

0.45gal

Bean hopper capacity

0.57lb

Display

yes

Features

double height-adjustable drink spout, auto shut-off, steam nozzle, milk frother (Cappuccinatore), hot water function, integrated water filter, automatic cleaning program, automatic descaling program

Dimensions

15x19.06x11.3in (WxDxH)

Weight

15.43lb

M: QW-35-FL

Product Description

Discover the Krups EA 8170 Arabica Display Black Manual Experience

Welcome to the world of home brewing excellence with the Krups EA 8170 Arabica Display Black. This automatic espresso machine is designed for those who demand restaurant-quality coffee without leaving their kitchen. The device features a Compact Thermoblock System and a powerful 15-bar pump, ensuring that every cup of ristretto, espresso, or coffee is extracted at the perfect temperature with maximum aroma.

The user-friendly LCD display guides you through every step, from preparing your favorite drink to performing essential maintenance. You have full control over volume, intensity, and temperature, allowing you to customize each beverage to your exact preference. Whether you crave a strong espresso or a creamy cappuccino using the steam wand, this machine delivers consistent results. The metal grinder ensures fresh beans are ground just before extraction, preserving the rich oils and flavors that define a great cup of coffee.

Maintenance is straightforward thanks to automated programs for rinsing, cleaning, and descaling. The machine alerts you when it needs attention, ensuring longevity and optimal performance. With its sleek black design and ergonomic interface, the Krups EA 8170 fits seamlessly into any modern kitchen while offering professional-grade functionality.

Key Notes for Users

  • Always pre-heat your porcelain cups for the best espresso temperature and crema.
  • Use fresh, cold tap water free of chlorine for superior taste.
  • Adjust the grind fineness knob during grinding for the most accurate settings.
  • Clean the steam nozzle immediately after use to prevent milk residue buildup.
  • Utilize the optional Claris Aqua Filter cartridge to extend machine life and improve flavor.
M: QW-35-FL

© Copyright 2026 Manual.ly