Manual.ly Logo

Kerbl Rubber Heating Plate 70239 Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 12

Loading...
fe343cce240a8001550a360e5ff3a0e142bf page 3
3
Funktion
In der Heizplatte ist ein elektrischer Heizleiter verbaut, der die Vollgummiummantelung gleichmäßig erwärmt. Die Heiz-
platte kann im Innen- und Außenbereich eingesetzt werden und ermöglicht die Wärmeerhaltung von Tieren, sowie die
Erwärmung unterschiedlicher Materialien.
Aufstellung und Inbetriebnahme
Gehen Sie wie folgt vor:
1. Heizplatte auf Beschädigungen prüfen.
2. Heizplatte auf ebenem Untergrund platzieren.
3. Um Wärmeverluste zu vermeiden und die Wärmeübertragung auf die Tiere / Tränke zu optimieren, sollte die Heizplatte
auf einem isolierenden Untergrund platziert werden.
4. Entfernen Sie brennbare oder leicht entzündliche Materialien aus der Umgebung der Wärmeplatte.
5. Verbinden Sie die Zuleitung der Heizplatte mit dem mitgelieferten Netzteil.
6. Netzteil mit 230 Volt Steckdose verbinden. Nach kurzer Zeit ist die Erwärmung an der Wärmeplatte und am
Netzteil fühlbar.
7. Zum Abschalten der Heizplatte den Netzstecker ziehen.
Hinweis: Die maximale Oberflächentemperatur erreicht die Heizplatte je nach Umgebungstemeratur
und Isolierung des Untergrundes erst nach ca. 1 - 2 Stunden.
Wartung und Reinigung
VORSICHT!
Gefahr von Personen-, Tier- und Sachschädigung
• Wartungs- und Reinigungsarbeiten nur mit gezogenem Netzstecker durchführen.
Beachten Sie bei der Wartung und Reinigung folgende Hinweise:
• Gerät vor Staub und Verunreinigungen freihalten.
• Gerät nur mit weichem Lappen oder feuchtem Tuch reinigen. Der Lappen bzw. das Tuch sollte frei von Benzin und / oder
Lösungsmittel sein, da diese die Heizplatte angreifen oder beschädigen können.
• Die Heizplatte niemals in Wasser tauchen bzw. nicht mit einem Wasserstrahl reinigen.
Technische Daten Heizplatte Netzteil
Artikelnummer / Typenbezeichnung: 70239
Versorgungsspannung / Frequenz: 24 V DC 230 V, 50 Hz
Leistung: 18 W (ca. 0,03 W / cm²) -
Schutzklasse: III II
Schutzart: IPX 7 IP 20
Abmessungen: 240 x 240 x 7 mm 87 x 50 30 mm
Gewicht: 1,2 kg 110 g
CE-Zeichen / CE-Konformitätserklärung
Hiermit erklärt die Albert KERBL GmbH, dass sich das in dieser Anleitung beschriebene Produkt/Gerät in Übereinstimmung mit den
grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen und Richtlinien befindet. Das CE-Zeichen steht für die Erfüllung der
Richtlinien der Europäischen Union. Die Konformitätserklärung kann unter folgender Internetadresse eingesehen werden: www.kerbl.de
Elektroschrott
Die sachgerechte Entsorgung des Produkts nach deren Funktionstüchtigkeit obliegt dem Betreiber. Beachten Sie die einschlägigen
Vorschriften ihres Landes. Das Gerät darf nicht mit dem Hausmüll entsorgt werden. Im Rahmen der EU-Richtlinie über die Entsor-
gung von Elektro-und Elektronikgeräten wird das Gerät bei den kommunalen Sammelstellen bzw. Wertstoffhöfen kostenlos entge-
gengenommen oder kann zu Fachhändlern, die einen Rücknahmeservice anbieten, zurückgebracht werden. Die ordnungsgemäße
Entsorgung dient dem Umweltschutz und verhindert mögliche schädliche Auswirkungen auf Mensch und Umwelt.

Chat with your Kerbl Rubber Heating Plate 70239 manual using AI

Get instant AI answers from your Kerbl Rubber Heating Plate 70239 manual

Ask anything about the Kerbl Rubber Heating Plate 70239. Answers come from this manual, with the pages they are based on.

Rubber Heating Plate 70239 Maintenance Schedule

Before first frost
Check function before winter

Verify the heating plate works correctly before the first frost occurs.

Before cleaning or moving
Disconnect power

Always remove the mains plug from the socket before moving or cleaning the heating plate.

As needed
Keep free from dust

Keep the device free from dust and soiling to maintain safety and performance.

As needed
Clean with soft cloth

Clean only with a soft cloth or damp towel that is free of petrol or solvents.

When damaged
Inspect for damage

Do not use if the rubber jacket or cable is damaged; stop operation immediately.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend Rubber Heating Plate 70239?

Yes No

Frequently Asked Questions

A

No, this unit is designed for local heating only. It warms the immediate vicinity of the surface and is not a room heater. For full room heating, other equipment is necessary.

Is this answer helpful?

A

The heating plate reaches a maximum surface temperature of approximately 45 degrees Celsius. This is safe for direct contact without burning small animals.

Is this answer helpful?

A

Use a damp cloth or soft towel to clean the surface. Avoid harsh solvents, petrol, or water immersion. Never use a water jet for cleaning.

Is this answer helpful?

A

Yes, the solid rubber sheath protects against bites. Ensure cables are bite-resistant and elevated safely away from animals.

Is this answer helpful?

A

No, damaged cables must not be repaired by owners. They must be replaced by the manufacturer to ensure safety compliance.

Is this answer helpful?

A

The power pack should be placed in a dry location, protected from moisture and outside the reach of splashing water.

Is this answer helpful?

A

The device consumes 18 Watts of electricity. It operates efficiently to provide localized warmth without high energy costs.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Even heat distribution reduces burn risk for small animals.
  • IPX7 rating allows use in damp or wet environments safely.
  • Durable rubber sheath resists bite damage from animals.
  • 18W power consumption is efficient and energy saving.
  • SELV safety voltage prevents electric shock hazards.
VS

Disadvantages

  • Not suitable for heating larger rooms effectively.
  • Power pack requires a dry and safe location nearby.
  • Rubber cannot be cleaned with harsh solvents or oil.
  • Cable damage requires manufacturer repair only.
  • Needs insulated substrate for best heat efficiency.
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Extension

Posts

N/A

Caves

N/A

Platforms

N/A

Beds

N/A

Cuddle Rolls

N/A

Color

Black

Dimensions

9.45 x 9.45 x 0.28 in. (LxBxH)

Features

IPX7, 6.56 ft Cable, Non-slip

M: qwen/qwen3.5-flash-20260224

Product Description

Kerbl Rubber Heating Plate Review

When keeping small animals and poultry warm during cold seasons, finding a reliable heat source is absolutely crucial for their health and productivity. The Kerbl Rubber heating plate for small animals and poultry is designed specifically for this exact purpose. Operating at a 24x24x0.7cm footprint with 18W of power, this black unit offers a focused warmth that is perfect for nests or drinking troughs. It is not intended to heat an entire room like a conventional radiator. Instead, it maintains local warmth near the surface where animals need it most effectively.

Safe and Effective Warmth

Temperature control is vital for animal safety. This heating plate reaches a maximum surface temperature of approximately 45 degrees Celsius. It warms up evenly due to the internal electric heating conductor within the solid rubber sheath. This ensures no hot spots that could harm an animal or cause burns. Users should place it on an insulated base to optimize heat transfer and avoid energy losses to the ground. It is crucial to keep flammable materials at least 500 mm away from the unit to prevent fire hazards. The power pack operates on 230 volts but delivers a safe low voltage to the plate. This separation ensures the animal side is safer.

Installation and Maintenance

Setup is straightforward for anyone with basic electrical knowledge. Always check the rubber jacket for damage before every use during the winter. Place the plate on a flat surface. Connect the included power supply securely. Note that the power pack is not moisture-proof and should be kept in a dry area outside the stall. Cleaning should be done with a damp cloth and no harsh solvents or petrol. Never immerse the plate in water or use high-pressure cleaning. Electrical cables should be protected from animal bites using proper conduit. If any damage occurs, stop using it immediately and do not attempt self-repair.

In conclusion, this product ensures the well-being of your livestock during winter months. It helps keep troughs frost-free and provides essential nest warmth after hatching. It maintains body temperature during chilly nights. Remember to follow manufacturer guidelines for warranty and safety compliance. Regular checks ensure longevity and protection for your pets. Proper disposal of old units helps the environment. We highly recommend this for small animal keepers seeking localized heat solutions without high electric bills.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly