Manual.ly Logo

Kerbl Rubber Heating Plate 70239 Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 12

Loading...
fe343cce240a8001550a360e5ff3a0e142bf page 2
2
(DE) Bedienungsanleitung
Sicherheitshinweise
Lesen Sie die nachfolgenden Hinweise sorgfältig, bevor Sie das Gerät verwenden.
Bewahren Sie diese Bedienungsanleitung gut auf.
VORSICHT!
Gefahr von Personen-, Tier- und Sachschädigung durch unsachgemäßen Gebrauch!
• Sicherstellen, dass das Gerät nur von Personen mit entsprechenden Fachkenntnissen verwendet wird.
• Gerät von Kindern und gebrechlichen Personen fernhalten.
• Die Wärmeplatte entspricht keiner Raumheizung, die Heizwirkung ist ausschließlich lokal in der näheren Umgebung
der Oberfläche spürbar.
• Die Oberfläche der Heizplatte erwärmt sich und wird heiß. (maximale Temperatur ca. 45 °C)
• Heizplatte nicht auf hitzeempfindliche Oberflächen und Gegenstände legen.
• Darauf achten, dass sich keine brennbaren oder leicht entzündlichen Materialien in der Nähe der Heizplatte befinden.
(Halten Sie einen Mindestabstand von ca. 500 mm ein.)
• Die Heizplatte darf nur mit einem Netzteil entsprechend den Angaben auf dem Typenschild betrieben werden.
Das Gerät darf nur mit einem Netzteil betrieben werden, welches als Ausgangsspannung SELV entsprechend der Kenn-
zeichnung auf dem Gerät liefert.
• Das Netzteil ist nicht gegen Feuchtigkeit geschützt. Stecken Sie das Netzteil nur in eine Steckdose ein, die in trockenem
und geschützten Bereich liegt.
• Bei nicht lesbaren technischen Daten auf der Heizplatte (Typenschild) und dem Netzteil darf diese nicht verwendet werden.
• Zum Schutz von Personen, Tieren und Einrichtungen darf das Gerät nur an Netzsteckdosen angeschlossen werden,
die separat durch einen Schutzschalter (FI) abgesichert sind.
• Alle elektrischen Zuleitungen so verlegen, dass diese vor Verbiss geschützt sind und für die Tiere nicht zugänglich sind.
Nur verbisssichere Materialien verwenden.
• Das Netzteil ist so anzubringen, dass es gegen Verbiss durch Tiere geschützt ist, sowie außerhalb des Bereichs, der
durch Spritzwasser erreicht werden kann. Empfehlung: Bringen Sie das Netzteil außerhalb des Stalls an, oder auf einer
Höhe von mindestens 120 cm über dem Fußboden.
• Elektrische Zuleitung nicht mit Öl oder scharfen Kanten in Verbindung bringen.
• Nicht mit Materialien, die Gummi angreifen, in Verbindung bringen.
• Die Funktionsfähigkeit der Heizplatte vor dem ersten Frosteinbruch prüfen.
• Die Heizplatte nicht benutzen bzw. unverzüglich außer Betrieb nehmen, wenn die Vollgummiummantelung oder die
Anschlussleitung beschädigt ist.
• Beschädigte Anschlussleitung nicht selbst reparieren. Die Anschlussleitung kann nur vom Hersteller erneuert werden.
• Heizplatte keiner Druckbelastung mit scharfen oder spitzen Gegenständen aussetzen.
• Den Stecker nicht am Kabel aus der Steckdose ziehen und die Heizplatte nicht am Kabel hängend herumtragen.
• Den Netzstecker immer aus der Steckdose ziehen, bevor die Heizplatte umgestellt oder gesäubert wird.
• Verwenden Sie ausschließlich das mitgelieferte Original-Netzteil.
Bestimmungsgemäßer Gebrauch
Die Wärmeplatte dient in erster Linie zur Erhaltung der Nestwärme nach dem
Schlüpfen / der Geburt und zur Erhaltung der Körpertemperatur der Tiere bei
kalten Temperaturen. Außerdem dient sie zur Erwärmung und Frostfreihaltung
von Geflügeltränken. Jeder andere Gebrauch gilt als nicht bestimmungsgemäß.
Bei nicht bestimmungsgemäßem Gebrauch, bei Eingriffen in das Gerät sowie
bei Veränderungen des Gerätes verlöschen Garantie- und Haftungsansprüche
seitens des Herstellers.
Anwendungsbeispiel
(Tränke nicht im Lieferumfang enthalten!)

Chat with your Kerbl Rubber Heating Plate 70239 manual using AI

Get instant AI answers from your Kerbl Rubber Heating Plate 70239 manual

Ask anything about the Kerbl Rubber Heating Plate 70239. Answers come from this manual, with the pages they are based on.

Rubber Heating Plate 70239 Maintenance Schedule

Before first frost
Check function before winter

Verify the heating plate works correctly before the first frost occurs.

Before cleaning or moving
Disconnect power

Always remove the mains plug from the socket before moving or cleaning the heating plate.

As needed
Keep free from dust

Keep the device free from dust and soiling to maintain safety and performance.

As needed
Clean with soft cloth

Clean only with a soft cloth or damp towel that is free of petrol or solvents.

When damaged
Inspect for damage

Do not use if the rubber jacket or cable is damaged; stop operation immediately.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend Rubber Heating Plate 70239?

Yes No

Frequently Asked Questions

A

No, this unit is designed for local heating only. It warms the immediate vicinity of the surface and is not a room heater. For full room heating, other equipment is necessary.

Is this answer helpful?

A

The heating plate reaches a maximum surface temperature of approximately 45 degrees Celsius. This is safe for direct contact without burning small animals.

Is this answer helpful?

A

Use a damp cloth or soft towel to clean the surface. Avoid harsh solvents, petrol, or water immersion. Never use a water jet for cleaning.

Is this answer helpful?

A

Yes, the solid rubber sheath protects against bites. Ensure cables are bite-resistant and elevated safely away from animals.

Is this answer helpful?

A

No, damaged cables must not be repaired by owners. They must be replaced by the manufacturer to ensure safety compliance.

Is this answer helpful?

A

The power pack should be placed in a dry location, protected from moisture and outside the reach of splashing water.

Is this answer helpful?

A

The device consumes 18 Watts of electricity. It operates efficiently to provide localized warmth without high energy costs.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Even heat distribution reduces burn risk for small animals.
  • IPX7 rating allows use in damp or wet environments safely.
  • Durable rubber sheath resists bite damage from animals.
  • 18W power consumption is efficient and energy saving.
  • SELV safety voltage prevents electric shock hazards.
VS

Disadvantages

  • Not suitable for heating larger rooms effectively.
  • Power pack requires a dry and safe location nearby.
  • Rubber cannot be cleaned with harsh solvents or oil.
  • Cable damage requires manufacturer repair only.
  • Needs insulated substrate for best heat efficiency.
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Extension

Posts

N/A

Caves

N/A

Platforms

N/A

Beds

N/A

Cuddle Rolls

N/A

Color

Black

Dimensions

9.45 x 9.45 x 0.28 in. (LxBxH)

Features

IPX7, 6.56 ft Cable, Non-slip

M: qwen/qwen3.5-flash-20260224

Product Description

Kerbl Rubber Heating Plate Review

When keeping small animals and poultry warm during cold seasons, finding a reliable heat source is absolutely crucial for their health and productivity. The Kerbl Rubber heating plate for small animals and poultry is designed specifically for this exact purpose. Operating at a 24x24x0.7cm footprint with 18W of power, this black unit offers a focused warmth that is perfect for nests or drinking troughs. It is not intended to heat an entire room like a conventional radiator. Instead, it maintains local warmth near the surface where animals need it most effectively.

Safe and Effective Warmth

Temperature control is vital for animal safety. This heating plate reaches a maximum surface temperature of approximately 45 degrees Celsius. It warms up evenly due to the internal electric heating conductor within the solid rubber sheath. This ensures no hot spots that could harm an animal or cause burns. Users should place it on an insulated base to optimize heat transfer and avoid energy losses to the ground. It is crucial to keep flammable materials at least 500 mm away from the unit to prevent fire hazards. The power pack operates on 230 volts but delivers a safe low voltage to the plate. This separation ensures the animal side is safer.

Installation and Maintenance

Setup is straightforward for anyone with basic electrical knowledge. Always check the rubber jacket for damage before every use during the winter. Place the plate on a flat surface. Connect the included power supply securely. Note that the power pack is not moisture-proof and should be kept in a dry area outside the stall. Cleaning should be done with a damp cloth and no harsh solvents or petrol. Never immerse the plate in water or use high-pressure cleaning. Electrical cables should be protected from animal bites using proper conduit. If any damage occurs, stop using it immediately and do not attempt self-repair.

In conclusion, this product ensures the well-being of your livestock during winter months. It helps keep troughs frost-free and provides essential nest warmth after hatching. It maintains body temperature during chilly nights. Remember to follow manufacturer guidelines for warranty and safety compliance. Regular checks ensure longevity and protection for your pets. Proper disposal of old units helps the environment. We highly recommend this for small animal keepers seeking localized heat solutions without high electric bills.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly