Manual.ly Logo

Kerbl Rubber Heating Plate 70239 Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 12

Loading...
fe343cce240a8001550a360e5ff3a0e142bf page 6
6
(EN) Operating instructions
Safety instructions
Read the following instructions carefully before using the device. Keep these operating instructions in a safe place.
CAUTION!
Risk of physical injury to people and animals and material damage if used incorrectly!
• Ensure that the device is only used be people who have the professional skills required to do so.
• Keep out of the reach of children and frail people.
• The heating plate is not a room-heating device; its heating effect can only be felt locally in the immediate vicinity
of the surface.
• The surface of the heating plate warms up and gets hot. (maximum temperature approx. 45 °C)
• Do not place the heating plate on objects or surfaces that are sensitive to heat.
• Ensure that no flammable or easily combustible materials are placed near the heating plate. (Maintain a minimum
distance of around 500 mm.)
• The heating plate may only be operated with a power pack that meets the specifications on the nameplate. The device
may only be operated with a power pack that delivers the SELV output voltage specified on the device’s markings.
• The power pack is not protected against moisture. Only plug the power pack into a socket that is located in a dry
and protected area.
• If technical data on the heating plate (type plate) and power pack is or becomes illegible, do not use it.
• For the safety of humans, animals and property, the device must only be connected to mains sockets that are fused
separately with a residual current circuit breaker (RCCB).
• All electrical supply lines must be routed so that they are protected from the risk of being bitten and are not accessible
to animals. Only use bite-resistant materials.
• The transformer must be attached so that it is protected from animal bites, as well as outside the area that can be
reached by splashed water. Recommendation: move the transformer outside the stable or at a height of at least
120 cm above the floor.
• Do not allow electrical supply cables to come into contact with oil or sharp edges.
• Do not allow to come into contact with materials that attack rubber.
• Check the function of the heating plate before the first frost.
• Do not use the heating plate or alternatively take it out of operation quickly if the solid rubber jacket or connection
cable is damaged.
• Do not try to repair a damaged supply cable yourself. The supply cable can only be replaced by the manufacturer.
• Do not expose the heating plate to any compressive force with sharp or pointed objects.
• Do not pull the plug out of the socket using the cable and do not carry the heating plate around by its cable.
• Always remove the mains plug from the socket before moving or cleaning the heating plate.
• Only use the original power pack supplied with the heating plate.
Correct use
The heating plate is primarily intended for maintaining nest heat after hatching
/ birth and for maintaining the animals‘ body temperature in cold weather. It is
also used to heat and keep poultry troughs free from frost. Any other use shall
be deemed incorrect. In the event of the incorrect use of, tampering with or
modifications to the device, the manufacturer‘s warranty and liabilities shall be
deemed invalid.
Practical example
(trough not included in the scope of delivery!)

Chat with your Kerbl Rubber Heating Plate 70239 manual using AI

Get instant AI answers from your Kerbl Rubber Heating Plate 70239 manual

Ask anything about the Kerbl Rubber Heating Plate 70239. Answers come from this manual, with the pages they are based on.

Rubber Heating Plate 70239 Maintenance Schedule

Before first frost
Check function before winter

Verify the heating plate works correctly before the first frost occurs.

Before cleaning or moving
Disconnect power

Always remove the mains plug from the socket before moving or cleaning the heating plate.

As needed
Keep free from dust

Keep the device free from dust and soiling to maintain safety and performance.

As needed
Clean with soft cloth

Clean only with a soft cloth or damp towel that is free of petrol or solvents.

When damaged
Inspect for damage

Do not use if the rubber jacket or cable is damaged; stop operation immediately.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend Rubber Heating Plate 70239?

Yes No

Frequently Asked Questions

A

No, this unit is designed for local heating only. It warms the immediate vicinity of the surface and is not a room heater. For full room heating, other equipment is necessary.

Is this answer helpful?

A

The heating plate reaches a maximum surface temperature of approximately 45 degrees Celsius. This is safe for direct contact without burning small animals.

Is this answer helpful?

A

Use a damp cloth or soft towel to clean the surface. Avoid harsh solvents, petrol, or water immersion. Never use a water jet for cleaning.

Is this answer helpful?

A

Yes, the solid rubber sheath protects against bites. Ensure cables are bite-resistant and elevated safely away from animals.

Is this answer helpful?

A

No, damaged cables must not be repaired by owners. They must be replaced by the manufacturer to ensure safety compliance.

Is this answer helpful?

A

The power pack should be placed in a dry location, protected from moisture and outside the reach of splashing water.

Is this answer helpful?

A

The device consumes 18 Watts of electricity. It operates efficiently to provide localized warmth without high energy costs.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Even heat distribution reduces burn risk for small animals.
  • IPX7 rating allows use in damp or wet environments safely.
  • Durable rubber sheath resists bite damage from animals.
  • 18W power consumption is efficient and energy saving.
  • SELV safety voltage prevents electric shock hazards.
VS

Disadvantages

  • Not suitable for heating larger rooms effectively.
  • Power pack requires a dry and safe location nearby.
  • Rubber cannot be cleaned with harsh solvents or oil.
  • Cable damage requires manufacturer repair only.
  • Needs insulated substrate for best heat efficiency.
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Extension

Posts

N/A

Caves

N/A

Platforms

N/A

Beds

N/A

Cuddle Rolls

N/A

Color

Black

Dimensions

9.45 x 9.45 x 0.28 in. (LxBxH)

Features

IPX7, 6.56 ft Cable, Non-slip

M: qwen/qwen3.5-flash-20260224

Product Description

Kerbl Rubber Heating Plate Review

When keeping small animals and poultry warm during cold seasons, finding a reliable heat source is absolutely crucial for their health and productivity. The Kerbl Rubber heating plate for small animals and poultry is designed specifically for this exact purpose. Operating at a 24x24x0.7cm footprint with 18W of power, this black unit offers a focused warmth that is perfect for nests or drinking troughs. It is not intended to heat an entire room like a conventional radiator. Instead, it maintains local warmth near the surface where animals need it most effectively.

Safe and Effective Warmth

Temperature control is vital for animal safety. This heating plate reaches a maximum surface temperature of approximately 45 degrees Celsius. It warms up evenly due to the internal electric heating conductor within the solid rubber sheath. This ensures no hot spots that could harm an animal or cause burns. Users should place it on an insulated base to optimize heat transfer and avoid energy losses to the ground. It is crucial to keep flammable materials at least 500 mm away from the unit to prevent fire hazards. The power pack operates on 230 volts but delivers a safe low voltage to the plate. This separation ensures the animal side is safer.

Installation and Maintenance

Setup is straightforward for anyone with basic electrical knowledge. Always check the rubber jacket for damage before every use during the winter. Place the plate on a flat surface. Connect the included power supply securely. Note that the power pack is not moisture-proof and should be kept in a dry area outside the stall. Cleaning should be done with a damp cloth and no harsh solvents or petrol. Never immerse the plate in water or use high-pressure cleaning. Electrical cables should be protected from animal bites using proper conduit. If any damage occurs, stop using it immediately and do not attempt self-repair.

In conclusion, this product ensures the well-being of your livestock during winter months. It helps keep troughs frost-free and provides essential nest warmth after hatching. It maintains body temperature during chilly nights. Remember to follow manufacturer guidelines for warranty and safety compliance. Regular checks ensure longevity and protection for your pets. Proper disposal of old units helps the environment. We highly recommend this for small animal keepers seeking localized heat solutions without high electric bills.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly